Building Materials
660 ProductsEach time you see a score on Eqogo, remember that it is relative to its product category. What does this mean?
Select 2 to 5 items to compare in detail.
95
Forbo Flooring Systems Allura Dryback 0.7 Wood LVT | Forbo Flooring Systems
Allura Dryback 0.7 is the highest specified, fully adhered LVT floor covering in Forbo's portfolio. The 47 natural Wood designs offer you all design freedom!Scored Product Attributes
95
 |
 |
 |
Materials |
|---|---|---|---|
Phthalates free |
|||
Recycled Content |
|
|
|
Certifications |
|---|---|---|---|
|
This CERT specifies a method for assessing the slip resistance of floor coverings using a ramp test, determining the angle at which slipping occurs in high-risk areas.
|
|||
|
This CERT verifies that products comply with the European Union’s REACH regulation, ensuring they are safe for human health and the environment by controlling harmful chemicals throughout the supply chain.
|
|||
|
This CERT marks conformity with European Union (EU) health, safety, and environmental protection standards. The CE (Conformité Européenne) Marking is required for many products to be sold within the European Economic Area (EEA), ensuring they meet EU regulatory requirements.
|
|||
|
This CERT specifies a test method for determining the electrical resistance of floor coverings, focusing on their ability to dissipate static electricity. EN 1815 is essential for ensuring that flooring materials minimize static buildup, supporting safety and comfort in residential, commercial, and industrial spaces.
|
|||
|
This CERT specifies the characteristics of non-cushioned, heterogeneous poly(vinyl chloride) (PVC) floor coverings, including a classification system based on usage intensity to guide consumer selection.
|
|||
|
This CERT specifies methods for assessing the change in appearance and stability of textile floor coverings, as well as potential damage to resilient or laminate floor coverings, caused by the movement of a castor chair.
|
|||
|
This CERT defines single-number quantities for impact sound insulation in buildings and floors, providing rules for determining these quantities from measurement results. It also specifies procedures for evaluating the impact sound reduction of floor coverings and floating floors.
|
|||
|
This CERT specifies a method for determining the thickness of different layers in resilient floor coverings, such as vinyl, linoleum, and rubber flooring. This standard ensures accurate measurement of each layer's thickness, which is crucial for assessing the product's quality and performance.
|
|||
|
This CERT specifies the health, safety, and energy-saving requirements for various types of floor coverings intended for internal use within buildings.
|
|||
|
This CERT establishes a classification system for these types of floor coverings based on practical requirements for areas and intensity of use.
|
|||
|
This CERT ensures that building products have low emissions of volatile organic compounds (VOCs), contributing to healthier indoor air quality and compliance with stringent European regulations and voluntary sustainability standards.
|
|||
|
This CERT specifies methods for determining the side length, edge straightness, and squareness of resilient and textile floor tiles and planks, ensuring precise dimensions for proper installation.
|
|||
|
This CERT provides tabulated design values for the hygrothermal properties of building materials and products, facilitating accurate heat and moisture transfer calculations in construction.
|
|||
|
This CERT specifies a method for determining the effect of artificial light on the color of textiles. This method utilizes a xenon arc lamp to simulate natural daylight (D65) and is applicable to textiles of all kinds and in all forms, including white (bleached or optically brightened) textiles.
|
|||
|
This CERT specifies a method for measuring the mass per unit area of resilient floor coverings. This standard is applicable to all forms of resilient flooring materials and is essential for quality control and specification compliance in the flooring industry.
|
|||
|
This CERT specifies a horizontal reference method for determining emissions of regulated dangerous substances, such as volatile organic compounds (VOCs), from construction products into indoor air, ensuring compliance with health and safety standards.
|
|||
|
This CERT specifies a method for assessing the dimensional stability and curling behavior of resilient floor coverings, such as sheets, tiles, or planks, after they have been exposed to heat. This evaluation is crucial for ensuring that flooring materials maintain their shape and lay flat under varying temperature conditions, thereby upholding both aesthetic and functional qualities in installed environments.
|
|||
|
This CERT specifies a method for measuring the total thickness of resilient floor coverings. This measurement is essential for quality control, ensuring that flooring materials meet specified thickness requirements for performance and durability.
|
|||
|
This CERT classifies construction products and building elements based on their reaction to fire, providing a standardized framework for assessing fire performance across Europe.
|
|||
|
This CERT specifies methods for determining the residual indentation produced in resilient or laminate floor coverings after applying and removing a constant load, ensuring durability and performance under static loads.
|
|||
|
This CERT specifies a procedure for assessing how resilient floor coverings react to chemical substances. This evaluation is crucial for determining the suitability of flooring materials in environments where exposure to chemicals is expected, ensuring both durability and safety.
|
|||
|
This CERT specifies a method for measuring the dynamic coefficient of friction on dry surfaces of resilient, laminate, and textile floor coverings to assess slip resistance.
|
|||
| Warranty: Over 7 - 10 Year |
Good To Know - Brand Attributes
Enviro
This brand uses renewable energy sources such as solar, wind, or hydro power to run its operations.
This brand conducts Life Cycle Analysis (LCA) for its products to assess their environmental impact from production to disposal.
Quality
This brand or its factories are ISO 9001 certified, demonstrating its commitment to quality management standards.
This brand is ISO 14001 certified, ensuring it follows international standards for effective environmental management systems
Origins
Made in Europe
95
Forbo Flooring Systems Allura Dryback 0.4 Wood LVT | Forbo Flooring Systems
Allura Dryback 0.4 is the economic, fully adhered floor version in Forbo's luxury vinyl tiles portfolio. The 39 natural wood designs offer you all design freedom!Scored Product Attributes
95
|
|
|
Materials |
|---|---|---|---|
Phthalates free |
|||
Recycled Content |
|
|
|
Certifications |
|---|---|---|---|
|
This CERT specifies a method for assessing the slip resistance of floor coverings using a ramp test, determining the angle at which slipping occurs in high-risk areas.
|
|||
|
This CERT verifies that products comply with the European Union’s REACH regulation, ensuring they are safe for human health and the environment by controlling harmful chemicals throughout the supply chain.
|
|||
|
This CERT marks conformity with European Union (EU) health, safety, and environmental protection standards. The CE (Conformité Européenne) Marking is required for many products to be sold within the European Economic Area (EEA), ensuring they meet EU regulatory requirements.
|
|||
|
This CERT specifies a horizontal reference method for determining emissions of regulated dangerous substances, such as volatile organic compounds (VOCs), from construction products into indoor air, ensuring compliance with health and safety standards.
|
|||
|
This CERT specifies a test method for determining the electrical resistance of floor coverings, focusing on their ability to dissipate static electricity. EN 1815 is essential for ensuring that flooring materials minimize static buildup, supporting safety and comfort in residential, commercial, and industrial spaces.
|
|||
|
This CERT ensures that building products have low emissions of volatile organic compounds (VOCs), contributing to healthier indoor air quality and compliance with stringent European regulations and voluntary sustainability standards.
|
|||
|
This CERT specifies methods for determining the residual indentation produced in resilient or laminate floor coverings after applying and removing a constant load, ensuring durability and performance under static loads.
|
|||
|
This CERT specifies methods for assessing the change in appearance and stability of textile floor coverings, as well as potential damage to resilient or laminate floor coverings, caused by the movement of a castor chair.
|
|||
|
This CERT specifies the health, safety, and energy-saving requirements for various types of floor coverings intended for internal use within buildings.
|
|||
|
This CERT establishes a classification system for these types of floor coverings based on practical requirements for areas and intensity of use.
|
|||
|
This CERT specifies a method for determining the effect of artificial light on the color of textiles. This method utilizes a xenon arc lamp to simulate natural daylight (D65) and is applicable to textiles of all kinds and in all forms, including white (bleached or optically brightened) textiles.
|
|||
|
This CERT specifies a method for measuring the mass per unit area of resilient floor coverings. This standard is applicable to all forms of resilient flooring materials and is essential for quality control and specification compliance in the flooring industry.
|
|||
|
This CERT specifies a method for assessing the dimensional stability and curling behavior of resilient floor coverings, such as sheets, tiles, or planks, after they have been exposed to heat. This evaluation is crucial for ensuring that flooring materials maintain their shape and lay flat under varying temperature conditions, thereby upholding both aesthetic and functional qualities in installed environments.
|
|||
|
This CERT specifies the characteristics of non-cushioned, heterogeneous poly(vinyl chloride) (PVC) floor coverings, including a classification system based on usage intensity to guide consumer selection.
|
|||
|
This CERT classifies construction products and building elements based on their reaction to fire, providing a standardized framework for assessing fire performance across Europe.
|
|||
|
This CERT defines single-number quantities for impact sound insulation in buildings and floors, providing rules for determining these quantities from measurement results. It also specifies procedures for evaluating the impact sound reduction of floor coverings and floating floors.
|
|||
|
This CERT specifies a method for determining the thickness of different layers in resilient floor coverings, such as vinyl, linoleum, and rubber flooring. This standard ensures accurate measurement of each layer's thickness, which is crucial for assessing the product's quality and performance.
|
|||
|
This CERT specifies methods for determining the side length, edge straightness, and squareness of resilient and textile floor tiles and planks, ensuring precise dimensions for proper installation.
|
|||
|
This CERT provides tabulated design values for the hygrothermal properties of building materials and products, facilitating accurate heat and moisture transfer calculations in construction.
|
|||
|
This CERT specifies a method for measuring the total thickness of resilient floor coverings. This measurement is essential for quality control, ensuring that flooring materials meet specified thickness requirements for performance and durability.
|
|||
|
This CERT specifies a procedure for assessing how resilient floor coverings react to chemical substances. This evaluation is crucial for determining the suitability of flooring materials in environments where exposure to chemicals is expected, ensuring both durability and safety.
|
|||
|
This CERT specifies a method for measuring the dynamic coefficient of friction on dry surfaces of resilient, laminate, and textile floor coverings to assess slip resistance.
|
|||
| Warranty: Over 7 - 10 Year |
Good To Know - Brand Attributes
Enviro
This brand uses renewable energy sources such as solar, wind, or hydro power to run its operations.
This brand conducts Life Cycle Analysis (LCA) for its products to assess their environmental impact from production to disposal.
Quality
This brand or its factories are ISO 9001 certified, demonstrating its commitment to quality management standards.
This brand is ISO 14001 certified, ensuring it follows international standards for effective environmental management systems
Origins
Made in Europe
95
Forbo Flooring Systems Allura Dryback 0.55 Wood LVT | Forbo Flooring Systems
Allura Dryback 0.55 is the core, fully adhered floor version in Forbo's luxury vinyl tiles portfolio. The 47 natural wood designs offer you all design freedom!Scored Product Attributes
95
|
|
|
Materials |
|---|---|---|---|
Phthalates free |
|||
Recycled Content |
|
|
|
Certifications |
|---|---|---|---|
|
This CERT establishes a classification system for these types of floor coverings based on practical requirements for areas and intensity of use.
|
|||
|
This CERT verifies that products comply with the European Union’s REACH regulation, ensuring they are safe for human health and the environment by controlling harmful chemicals throughout the supply chain.
|
|||
|
This CERT classifies construction products and building elements based on their reaction to fire, providing a standardized framework for assessing fire performance across Europe.
|
|||
|
This CERT specifies a method for measuring the dynamic coefficient of friction on dry surfaces of resilient, laminate, and textile floor coverings to assess slip resistance.
|
|||
|
This CERT specifies methods for determining the residual indentation produced in resilient or laminate floor coverings after applying and removing a constant load, ensuring durability and performance under static loads.
|
|||
|
This CERT specifies methods for determining the side length, edge straightness, and squareness of resilient and textile floor tiles and planks, ensuring precise dimensions for proper installation.
|
|||
|
This CERT marks conformity with European Union (EU) health, safety, and environmental protection standards. The CE (Conformité Européenne) Marking is required for many products to be sold within the European Economic Area (EEA), ensuring they meet EU regulatory requirements.
|
|||
|
This CERT specifies a test method for determining the electrical resistance of floor coverings, focusing on their ability to dissipate static electricity. EN 1815 is essential for ensuring that flooring materials minimize static buildup, supporting safety and comfort in residential, commercial, and industrial spaces.
|
|||
|
This CERT specifies a method for assessing the slip resistance of floor coverings using a ramp test, determining the angle at which slipping occurs in high-risk areas.
|
|||
|
This CERT defines single-number quantities for impact sound insulation in buildings and floors, providing rules for determining these quantities from measurement results. It also specifies procedures for evaluating the impact sound reduction of floor coverings and floating floors.
|
|||
|
This CERT specifies a method for determining the thickness of different layers in resilient floor coverings, such as vinyl, linoleum, and rubber flooring. This standard ensures accurate measurement of each layer's thickness, which is crucial for assessing the product's quality and performance.
|
|||
|
This CERT specifies the health, safety, and energy-saving requirements for various types of floor coverings intended for internal use within buildings.
|
|||
|
This CERT specifies a method for determining the effect of artificial light on the color of textiles. This method utilizes a xenon arc lamp to simulate natural daylight (D65) and is applicable to textiles of all kinds and in all forms, including white (bleached or optically brightened) textiles.
|
|||
|
This CERT ensures that building products have low emissions of volatile organic compounds (VOCs), contributing to healthier indoor air quality and compliance with stringent European regulations and voluntary sustainability standards.
|
|||
|
This CERT specifies the characteristics of non-cushioned, heterogeneous poly(vinyl chloride) (PVC) floor coverings, including a classification system based on usage intensity to guide consumer selection.
|
|||
|
This CERT specifies methods for assessing the change in appearance and stability of textile floor coverings, as well as potential damage to resilient or laminate floor coverings, caused by the movement of a castor chair.
|
|||
|
This CERT specifies a horizontal reference method for determining emissions of regulated dangerous substances, such as volatile organic compounds (VOCs), from construction products into indoor air, ensuring compliance with health and safety standards.
|
|||
|
This CERT specifies a method for measuring the mass per unit area of resilient floor coverings. This standard is applicable to all forms of resilient flooring materials and is essential for quality control and specification compliance in the flooring industry.
|
|||
|
This CERT provides tabulated design values for the hygrothermal properties of building materials and products, facilitating accurate heat and moisture transfer calculations in construction.
|
|||
|
This CERT specifies a method for assessing the dimensional stability and curling behavior of resilient floor coverings, such as sheets, tiles, or planks, after they have been exposed to heat. This evaluation is crucial for ensuring that flooring materials maintain their shape and lay flat under varying temperature conditions, thereby upholding both aesthetic and functional qualities in installed environments.
|
|||
|
This CERT specifies a method for measuring the total thickness of resilient floor coverings. This measurement is essential for quality control, ensuring that flooring materials meet specified thickness requirements for performance and durability.
|
|||
|
This CERT specifies a procedure for assessing how resilient floor coverings react to chemical substances. This evaluation is crucial for determining the suitability of flooring materials in environments where exposure to chemicals is expected, ensuring both durability and safety.
|
|||
| Warranty: Over 7 - 10 Year |
Good To Know - Brand Attributes
Enviro
This brand uses renewable energy sources such as solar, wind, or hydro power to run its operations.
This brand conducts Life Cycle Analysis (LCA) for its products to assess their environmental impact from production to disposal.
Quality
This brand or its factories are ISO 9001 certified, demonstrating its commitment to quality management standards.
This brand is ISO 14001 certified, ensuring it follows international standards for effective environmental management systems
Origins
Made in Europe
83
BerryAlloc Location | BerryAlloc
Zenn 55 has a 0.55 mm wear layer for intensive commercial use and is available in both rigid click (5G) with integrated underlay or in glue-down.Scored Product Attributes
83
|
|
|
Certifications |
|---|---|---|---|
|
This CERT specifies a method for assessing the dimensional stability and curling behavior of resilient floor coverings, such as sheets, tiles, or planks, after they have been exposed to heat. This evaluation is crucial for ensuring that flooring materials maintain their shape and lay flat under varying temperature conditions, thereby upholding both aesthetic and functional qualities in installed environments.
|
|||
|
This CERT marks conformity with European Union (EU) health, safety, and environmental protection standards. The CE (Conformité Européenne) Marking is required for many products to be sold within the European Economic Area (EEA), ensuring they meet EU regulatory requirements.
|
|||
|
This CERT specifies a method for assessing the slip resistance of floor coverings using a ramp test, determining the angle at which slipping occurs in high-risk areas.
|
|||
|
This CERT specifies the characteristics of non-cushioned, heterogeneous poly(vinyl chloride) (PVC) floor coverings, including a classification system based on usage intensity to guide consumer selection.
|
|||
|
This CERT establishes a classification system for these types of floor coverings based on practical requirements for areas and intensity of use.
|
|||
|
This CERT specifies a method for measuring the total thickness of resilient floor coverings. This measurement is essential for quality control, ensuring that flooring materials meet specified thickness requirements for performance and durability.
|
|||
|
This CERT specifies methods for assessing the change in appearance and stability of textile floor coverings, as well as potential damage to resilient or laminate floor coverings, caused by the movement of a castor chair.
|
|||
|
This CERT classifies construction products and building elements based on their reaction to fire, providing a standardized framework for assessing fire performance across Europe.
|
|||
|
This CERT specifies methods for determining the residual indentation produced in resilient or laminate floor coverings after applying and removing a constant load, ensuring durability and performance under static loads.
|
|||
|
This CERT specifies a procedure for assessing how resilient floor coverings react to chemical substances. This evaluation is crucial for determining the suitability of flooring materials in environments where exposure to chemicals is expected, ensuring both durability and safety.
|
|||
|
This CERT verifies that hard surface flooring materials, adhesives, and underlayments meet stringent indoor air quality (IAQ) standards by limiting emissions of volatile organic compounds (VOCs), thereby contributing to healthier indoor environments.
|
|||
|
This CERT ensures that building products have low emissions of volatile organic compounds (VOCs), contributing to healthier indoor air quality and compliance with stringent European regulations and voluntary sustainability standards.
|
|||
|
This CERT specifies laboratory methods for measuring the sound insulation properties of building elements, such as walls, floors, and doors, to assess their effectiveness in reducing sound transmission
|
|||
|
This CERT specifies a method for determining the thickness of different layers in resilient floor coverings, such as vinyl, linoleum, and rubber flooring. This standard ensures accurate measurement of each layer's thickness, which is crucial for assessing the product's quality and performance.
|
|||
|
This CERT evaluates and certifies products based on their emissions of volatile substances into indoor air, assigning a score from A+ (very low emissions) to C (high emissions), thereby guiding consumers toward healthier choices.
|
|||
|
This CERT specifies the guarded hot plate method for measuring steady-state thermal resistance and related properties of flat slab insulation materials, ensuring accurate thermal performance assessment.
|
|||
|
This CERT specifies a method for measuring the dynamic coefficient of friction on dry surfaces of resilient, laminate, and textile floor coverings to assess slip resistance.
|
|||
| Warranty: Over 14 - 20 Year |
82
BerryAlloc Location | BerryAlloc
Zenn 30 has a 0.30 mm wear layer for moderate residential use and is available in both rigid click (2G) with integrated underlay or in glue-down.Scored Product Attributes
82
|
|
|
Certifications |
|---|---|---|---|
|
This CERT specifies a method for measuring the total thickness of resilient floor coverings. This measurement is essential for quality control, ensuring that flooring materials meet specified thickness requirements for performance and durability.
|
|||
|
This CERT marks conformity with European Union (EU) health, safety, and environmental protection standards. The CE (Conformité Européenne) Marking is required for many products to be sold within the European Economic Area (EEA), ensuring they meet EU regulatory requirements.
|
|||
|
This CERT evaluates and certifies products based on their emissions of volatile substances into indoor air, assigning a score from A+ (very low emissions) to C (high emissions), thereby guiding consumers toward healthier choices.
|
|||
|
This CERT specifies a method for measuring the dynamic coefficient of friction on dry surfaces of resilient, laminate, and textile floor coverings to assess slip resistance.
|
|||
|
This CERT specifies the guarded hot plate method for measuring steady-state thermal resistance and related properties of flat slab insulation materials, ensuring accurate thermal performance assessment.
|
|||
|
This CERT specifies a method for assessing the slip resistance of floor coverings using a ramp test, determining the angle at which slipping occurs in high-risk areas.
|
|||
|
This CERT establishes a classification system for these types of floor coverings based on practical requirements for areas and intensity of use.
|
|||
|
This CERT classifies construction products and building elements based on their reaction to fire, providing a standardized framework for assessing fire performance across Europe.
|
|||
|
This CERT specifies methods for assessing the change in appearance and stability of textile floor coverings, as well as potential damage to resilient or laminate floor coverings, caused by the movement of a castor chair.
|
|||
|
This CERT specifies a method for determining the effect of artificial light on the color of textiles. This method utilizes a xenon arc lamp to simulate natural daylight (D65) and is applicable to textiles of all kinds and in all forms, including white (bleached or optically brightened) textiles.
|
|||
|
This CERT specifies a method for assessing the dimensional stability and curling behavior of resilient floor coverings, such as sheets, tiles, or planks, after they have been exposed to heat. This evaluation is crucial for ensuring that flooring materials maintain their shape and lay flat under varying temperature conditions, thereby upholding both aesthetic and functional qualities in installed environments.
|
|||
|
This CERT specifies a procedure for assessing how resilient floor coverings react to chemical substances. This evaluation is crucial for determining the suitability of flooring materials in environments where exposure to chemicals is expected, ensuring both durability and safety.
|
|||
|
This CERT specifies methods for determining the residual indentation produced in resilient or laminate floor coverings after applying and removing a constant load, ensuring durability and performance under static loads.
|
|||
|
This CERT verifies that hard surface flooring materials, adhesives, and underlayments meet stringent indoor air quality (IAQ) standards by limiting emissions of volatile organic compounds (VOCs), thereby contributing to healthier indoor environments.
|
|||
|
This CERT ensures that building products have low emissions of volatile organic compounds (VOCs), contributing to healthier indoor air quality and compliance with stringent European regulations and voluntary sustainability standards.
|
|||
|
This CERT specifies laboratory methods for measuring the sound insulation properties of building elements, such as walls, floors, and doors, to assess their effectiveness in reducing sound transmission
|
|||
|
This CERT specifies a method for determining the thickness of different layers in resilient floor coverings, such as vinyl, linoleum, and rubber flooring. This standard ensures accurate measurement of each layer's thickness, which is crucial for assessing the product's quality and performance.
|
|||
| Warranty: Over 14 - 20 Year |
82
BerryAlloc Location | BerryAlloc
Zenn 30 has a 0.30 mm wear layer for moderate residential use and is available in both rigid click (2G) with integrated underlay or in glue-down.Scored Product Attributes
82
|
|
|
Certifications |
|---|---|---|---|
|
This CERT establishes a classification system for these types of floor coverings based on practical requirements for areas and intensity of use.
|
|||
|
This CERT marks conformity with European Union (EU) health, safety, and environmental protection standards. The CE (Conformité Européenne) Marking is required for many products to be sold within the European Economic Area (EEA), ensuring they meet EU regulatory requirements.
|
|||
|
This CERT specifies a method for assessing the slip resistance of floor coverings using a ramp test, determining the angle at which slipping occurs in high-risk areas.
|
|||
|
This CERT evaluates and certifies products based on their emissions of volatile substances into indoor air, assigning a score from A+ (very low emissions) to C (high emissions), thereby guiding consumers toward healthier choices.
|
|||
|
This CERT specifies a method for determining the effect of artificial light on the color of textiles. This method utilizes a xenon arc lamp to simulate natural daylight (D65) and is applicable to textiles of all kinds and in all forms, including white (bleached or optically brightened) textiles.
|
|||
|
This CERT specifies the guarded hot plate method for measuring steady-state thermal resistance and related properties of flat slab insulation materials, ensuring accurate thermal performance assessment.
|
|||
|
This CERT classifies construction products and building elements based on their reaction to fire, providing a standardized framework for assessing fire performance across Europe.
|
|||
|
This CERT specifies methods for assessing the change in appearance and stability of textile floor coverings, as well as potential damage to resilient or laminate floor coverings, caused by the movement of a castor chair.
|
|||
|
This CERT specifies a method for measuring the dynamic coefficient of friction on dry surfaces of resilient, laminate, and textile floor coverings to assess slip resistance.
|
|||
|
This CERT specifies a method for assessing the dimensional stability and curling behavior of resilient floor coverings, such as sheets, tiles, or planks, after they have been exposed to heat. This evaluation is crucial for ensuring that flooring materials maintain their shape and lay flat under varying temperature conditions, thereby upholding both aesthetic and functional qualities in installed environments.
|
|||
|
This CERT specifies methods for determining the residual indentation produced in resilient or laminate floor coverings after applying and removing a constant load, ensuring durability and performance under static loads.
|
|||
|
This CERT specifies a method for determining the thickness of different layers in resilient floor coverings, such as vinyl, linoleum, and rubber flooring. This standard ensures accurate measurement of each layer's thickness, which is crucial for assessing the product's quality and performance.
|
|||
|
This CERT specifies a method for measuring the total thickness of resilient floor coverings. This measurement is essential for quality control, ensuring that flooring materials meet specified thickness requirements for performance and durability.
|
|||
|
This CERT specifies a procedure for assessing how resilient floor coverings react to chemical substances. This evaluation is crucial for determining the suitability of flooring materials in environments where exposure to chemicals is expected, ensuring both durability and safety.
|
|||
|
This CERT verifies that hard surface flooring materials, adhesives, and underlayments meet stringent indoor air quality (IAQ) standards by limiting emissions of volatile organic compounds (VOCs), thereby contributing to healthier indoor environments.
|
|||
|
This CERT ensures that building products have low emissions of volatile organic compounds (VOCs), contributing to healthier indoor air quality and compliance with stringent European regulations and voluntary sustainability standards.
|
|||
|
This CERT specifies laboratory methods for measuring the sound insulation properties of building elements, such as walls, floors, and doors, to assess their effectiveness in reducing sound transmission
|
|||
| Warranty: Over 14 - 20 Year |
73
Karndean Designflooring Knight Tile | Honed Oyster Slate ST17
We hand-selected volcanic slate from Englands Lake District, sourcing unique pieces of 300 million-year-oldScored Product Attributes
73
|
|
|
Materials |
|---|---|---|---|
Phthalates free |
|
|
|
Certifications |
|---|---|---|---|
|
This CERT provides third-party verification for Environmental Product Declarations, ensuring accuracy in reported lifecycle environmental impacts of products. SCS Verified EPDs are based on international standards, promoting transparency and supporting green building programs like LEED by offering reliable environmental data for informed decision-making.
|
|||
|
This CERT verifies that carpets and rugs meet the flammability standards set by the Consumer Product Safety Commission (CPSC) to reduce fire hazards.
|
|||
|
This CERT defines material and performance requirements for solid vinyl floor tiles used in commercial and residential spaces, ensuring consistent quality and durability standards.
|
|||
|
This CERT verifies that products meet strict standards for low chemical emissions, contributing to healthier indoor air quality by reducing exposure to pollutants and volatile organic compounds (VOCs).
|
|||
|
This CERT evaluates the chemical resistance of resilient flooring materials, ensuring durability and aesthetic retention when exposed to chemical reagents in residential and commercial settings.
|
|||
|
|
|||
|
This CERT specifies a laboratory test method for measuring the static coefficient of friction (SCOF) of polish-coated flooring surfaces using the James Machine. It establishes a compliance criterion to determine the safety of polished walkway surfaces concerning human locomotion.
|
|||
|
This CERT measures the effectiveness of floor coverings in reducing impact sound through concrete floors, quantifying noise mitigation by evaluating the improvement in impact insulation class (ΔIIC) over standard slabs.
|
|||
|
This CERT measures the critical radiant flux of floor coverings under radiant heat, assessing flame spread in corridors or exitways during simulated fire conditions for fire safety evaluations.
|
|||
|
This CERT evaluates the recovery properties of resilient flooring under prolonged static loads, ensuring durability and resistance to permanent indentations from furniture or equipment.
|
|||
|
This CERT evaluates the dimensional stability and curling of resilient flooring after heat exposure, ensuring the material maintains size and flatness under temperature variations during use.
|
|||
|
This CERT verifies that hard surface flooring materials, adhesives, and underlayments meet stringent indoor air quality (IAQ) standards by limiting emissions of volatile organic compounds (VOCs), thereby contributing to healthier indoor environments.
|
|||
|
This CERT provides a standardized method for evaluating the abrasion resistance of textile fabrics using a rotary platform abrader, aiding in assessing fabric durability.
|
|||
|
This CERT measures the impact sound transmission of floor-ceiling assemblies using a tapping machine, evaluating noise attenuation like footsteps to ensure acoustic comfort in multi-story buildings.
|
|||
|
This CERT measures the optical density of smoke produced by materials up to 1 inch thick during pyrolysis and combustion, assessing smoke accumulation and light attenuation in a closed chamber.
|
|||
|
This CERT evaluates the flexibility of resilient flooring using a cylindrical mandrel, assessing the material's ability to withstand bending without cracking or defects, ensuring durability and ease of installation.
|
|||
|
This CERT measures the light stability of resilient flooring by assessing color changes after light exposure, ensuring the material maintains appearance and performance over time.
|
|||
| Warranty: Lifetime |
Good To Know - Brand Attributes
Enviro
"Carbon Reduction Goals Tier 1" refers to the highest level of ambition for carbon reduction targets set by companies. It is often used as a term in sustainability and climate action initiatives, including the Science Based Targets initiative (SBTi). To achieve Tier 1 status, companies must set absolute GHG emissions reduction targets, which means reducing their emissions in absolute terms.
Quality
This brand or its factories are ISO 9001 certified, demonstrating its commitment to quality management standards.
This brand is ISO 14001 certified, ensuring it follows international standards for effective environmental management systems
Governance
- Brand must describe itself in some way or form as family owned. Do not assume
73
Karndean Designflooring Knight Tile Rigid Core | Ivory Riven Slate SCB-ST18-G
Beige and off-white tones highlight the individual markings of the original slate and work together in harmony to create a soft, neutral canvas for your space.Scored Product Attributes
73
|
|
|
Materials |
|---|---|---|---|
Phthalates free |
|
|
|
Certifications |
|---|---|---|---|
|
This CERT verifies that products meet strict standards for low chemical emissions, contributing to healthier indoor air quality by reducing exposure to pollutants and volatile organic compounds (VOCs).
|
|||
|
This CERT verifies that carpets and rugs meet the flammability standards set by the Consumer Product Safety Commission (CPSC) to reduce fire hazards.
|
|||
|
|
|||
|
This CERT provides third-party verification for Environmental Product Declarations, ensuring accuracy in reported lifecycle environmental impacts of products. SCS Verified EPDs are based on international standards, promoting transparency and supporting green building programs like LEED by offering reliable environmental data for informed decision-making.
|
|||
|
This CERT specifies a laboratory test method for measuring the static coefficient of friction (SCOF) of polish-coated flooring surfaces using the James Machine. It establishes a compliance criterion to determine the safety of polished walkway surfaces concerning human locomotion.
|
|||
|
This CERT evaluates the recovery properties of resilient flooring under prolonged static loads, ensuring durability and resistance to permanent indentations from furniture or equipment.
|
|||
|
This CERT defines material and performance requirements for solid vinyl floor tiles used in commercial and residential spaces, ensuring consistent quality and durability standards.
|
|||
|
This CERT evaluates the dimensional stability and curling of resilient flooring after heat exposure, ensuring the material maintains size and flatness under temperature variations during use.
|
|||
|
This CERT measures the effectiveness of floor coverings in reducing impact sound through concrete floors, quantifying noise mitigation by evaluating the improvement in impact insulation class (ΔIIC) over standard slabs.
|
|||
|
This CERT measures the critical radiant flux of floor coverings under radiant heat, assessing flame spread in corridors or exitways during simulated fire conditions for fire safety evaluations.
|
|||
|
This CERT measures the impact sound transmission of floor-ceiling assemblies using a tapping machine, evaluating noise attenuation like footsteps to ensure acoustic comfort in multi-story buildings.
|
|||
|
This CERT measures the light stability of resilient flooring by assessing color changes after light exposure, ensuring the material maintains appearance and performance over time.
|
|||
|
This CERT provides a standardized method for evaluating the abrasion resistance of textile fabrics using a rotary platform abrader, aiding in assessing fabric durability.
|
|||
|
This CERT measures the optical density of smoke produced by materials up to 1 inch thick during pyrolysis and combustion, assessing smoke accumulation and light attenuation in a closed chamber.
|
|||
|
This CERT verifies that hard surface flooring materials, adhesives, and underlayments meet stringent indoor air quality (IAQ) standards by limiting emissions of volatile organic compounds (VOCs), thereby contributing to healthier indoor environments.
|
|||
|
This CERT evaluates the flexibility of resilient flooring using a cylindrical mandrel, assessing the material's ability to withstand bending without cracking or defects, ensuring durability and ease of installation.
|
|||
|
This CERT evaluates the chemical resistance of resilient flooring materials, ensuring durability and aesthetic retention when exposed to chemical reagents in residential and commercial settings.
|
|||
| Warranty: Lifetime |
Good To Know - Brand Attributes
Enviro
"Carbon Reduction Goals Tier 1" refers to the highest level of ambition for carbon reduction targets set by companies. It is often used as a term in sustainability and climate action initiatives, including the Science Based Targets initiative (SBTi). To achieve Tier 1 status, companies must set absolute GHG emissions reduction targets, which means reducing their emissions in absolute terms.
Quality
This brand or its factories are ISO 9001 certified, demonstrating its commitment to quality management standards.
This brand is ISO 14001 certified, ensuring it follows international standards for effective environmental management systems
Governance
- Brand must describe itself in some way or form as family owned. Do not assume
73
Karndean Designflooring Knight Tile | KP105 White Painted Pine
Highly realistic chalky white painted wood, stripped down to reveal beige undertones - without the practical limitations of real painted hardwoodScored Product Attributes
73
|
|
|
Materials |
|---|---|---|---|
Phthalates free |
|
|
|
Certifications |
|---|---|---|---|
|
This CERT verifies that products meet strict standards for low chemical emissions, contributing to healthier indoor air quality by reducing exposure to pollutants and volatile organic compounds (VOCs).
|
|||
|
This CERT verifies that carpets and rugs meet the flammability standards set by the Consumer Product Safety Commission (CPSC) to reduce fire hazards.
|
|||
|
This CERT defines material and performance requirements for solid vinyl floor tiles used in commercial and residential spaces, ensuring consistent quality and durability standards.
|
|||
|
This CERT evaluates the recovery properties of resilient flooring under prolonged static loads, ensuring durability and resistance to permanent indentations from furniture or equipment.
|
|||
|
|
|||
|
This CERT provides third-party verification for Environmental Product Declarations, ensuring accuracy in reported lifecycle environmental impacts of products. SCS Verified EPDs are based on international standards, promoting transparency and supporting green building programs like LEED by offering reliable environmental data for informed decision-making.
|
|||
|
This CERT specifies a laboratory test method for measuring the static coefficient of friction (SCOF) of polish-coated flooring surfaces using the James Machine. It establishes a compliance criterion to determine the safety of polished walkway surfaces concerning human locomotion.
|
|||
|
This CERT measures the effectiveness of floor coverings in reducing impact sound through concrete floors, quantifying noise mitigation by evaluating the improvement in impact insulation class (ΔIIC) over standard slabs.
|
|||
|
This CERT evaluates the chemical resistance of resilient flooring materials, ensuring durability and aesthetic retention when exposed to chemical reagents in residential and commercial settings.
|
|||
|
This CERT verifies that hard surface flooring materials, adhesives, and underlayments meet stringent indoor air quality (IAQ) standards by limiting emissions of volatile organic compounds (VOCs), thereby contributing to healthier indoor environments.
|
|||
|
This CERT measures the critical radiant flux of floor coverings under radiant heat, assessing flame spread in corridors or exitways during simulated fire conditions for fire safety evaluations.
|
|||
|
This CERT measures the light stability of resilient flooring by assessing color changes after light exposure, ensuring the material maintains appearance and performance over time.
|
|||
|
This CERT measures the impact sound transmission of floor-ceiling assemblies using a tapping machine, evaluating noise attenuation like footsteps to ensure acoustic comfort in multi-story buildings.
|
|||
|
This CERT measures the optical density of smoke produced by materials up to 1 inch thick during pyrolysis and combustion, assessing smoke accumulation and light attenuation in a closed chamber.
|
|||
|
This CERT evaluates the dimensional stability and curling of resilient flooring after heat exposure, ensuring the material maintains size and flatness under temperature variations during use.
|
|||
|
This CERT provides a standardized method for evaluating the abrasion resistance of textile fabrics using a rotary platform abrader, aiding in assessing fabric durability.
|
|||
|
This CERT evaluates the flexibility of resilient flooring using a cylindrical mandrel, assessing the material's ability to withstand bending without cracking or defects, ensuring durability and ease of installation.
|
|||
| Warranty: Lifetime |
Good To Know - Brand Attributes
Enviro
"Carbon Reduction Goals Tier 1" refers to the highest level of ambition for carbon reduction targets set by companies. It is often used as a term in sustainability and climate action initiatives, including the Science Based Targets initiative (SBTi). To achieve Tier 1 status, companies must set absolute GHG emissions reduction targets, which means reducing their emissions in absolute terms.
Quality
This brand or its factories are ISO 9001 certified, demonstrating its commitment to quality management standards.
This brand is ISO 14001 certified, ensuring it follows international standards for effective environmental management systems
Governance
- Brand must describe itself in some way or form as family owned. Do not assume
99
Florim Ceramiche Color Bianco Lasa | Florim
Discover the color Bianco Lasa by Florim: elegance and durability in porcelain stoneware. Visit Florim for more details.Scored Product Attributes
99
|
|
|
Certifications |
|---|---|---|---|
|
This CERT recognizes businesses that meet high standards of social and environmental performance, accountability and transparency as certified by B Lab.
|
|||
|
This CERT verifies that products meet strict standards for low chemical emissions, contributing to healthier indoor air quality by reducing exposure to pollutants and volatile organic compounds (VOCs).
|
|||
|
This CERT marks conformity with European Union (EU) health, safety, and environmental protection standards. The CE (Conformité Européenne) Marking is required for many products to be sold within the European Economic Area (EEA), ensuring they meet EU regulatory requirements.
|
|||
|
This CERT recognizes businesses with secure and compliant supply chains under the Authorized Economic Operator (AEO) framework. It facilitates faster customs processes, enhances trade security, and ensures compliance with international trade regulations.
|
|||
|
This CERT ensures compliance with the International Organization for Standardization (ISO) standard for environmental management systems (EMS). ISO 14001 provides a framework for organizations to identify, manage, and reduce their environmental impact, ensuring sustainable practices and regulatory compliance
|
|||
|
The Criteri Ambientali Minimi (CAM) are environmental requirements defined by the Italian Ministry of Environment and Energy Security (MASE) for various stages of public procurement processes. Their objective is to identify design solutions, products, or services with the best environmental profile across their entire life cycle, considering market availability.
|
|||
|
This CERT provides a comprehensive environmental profile for Florim S.p.A. SB's porcelain stoneware surfaces, detailing their environmental impact throughout the product lifecycle. It aids stakeholders in making informed decisions based on sustainability metrics
|
|||
|
This CERT specifies sustainability requirements, assessment methods, and evaluation schemes for ceramic tiles, encompassing environmental, economic, and social criteria throughout the product's life cycle—from raw material extraction to end-of-life management.
|
|||
|
This CERT is an international standard that specifies requirements for an occupational health and safety (OH&S) management system, aiming to prevent work-related injury and ill health while proactively improving OH&S performance. It provides a framework for organizations, regardless of size, type, or nature, to create safe and healthy workplaces by eliminating hazards and minimizing OH&S risks.
|
|||
|
This CERT provides a framework for organizations to establish, implement, and improve energy management systems, aiming to enhance energy efficiency, reduce costs, and decrease greenhouse gas emissions.
|
|||
|
This CERT provides verified Environmental Product Declarations (EPDs) for building materials, offering transparent information about a product's environmental impact throughout its lifecycle.
|
|||
| Warranty: Lifetime |
99
Florim Ceramiche Color Marble Breach A | Florim
Discover the color Marble Breach A by Florim: elegance and durability in porcelain stoneware. Visit Florim for more details.Scored Product Attributes
99
|
|
|
Certifications |
|---|---|---|---|
|
This CERT recognizes businesses that meet high standards of social and environmental performance, accountability and transparency as certified by B Lab.
|
|||
|
This CERT verifies that products meet strict standards for low chemical emissions, contributing to healthier indoor air quality by reducing exposure to pollutants and volatile organic compounds (VOCs).
|
|||
|
This CERT marks conformity with European Union (EU) health, safety, and environmental protection standards. The CE (Conformité Européenne) Marking is required for many products to be sold within the European Economic Area (EEA), ensuring they meet EU regulatory requirements.
|
|||
|
This CERT ensures compliance with the International Organization for Standardization (ISO) standard for environmental management systems (EMS). ISO 14001 provides a framework for organizations to identify, manage, and reduce their environmental impact, ensuring sustainable practices and regulatory compliance
|
|||
|
This CERT recognizes businesses with secure and compliant supply chains under the Authorized Economic Operator (AEO) framework. It facilitates faster customs processes, enhances trade security, and ensures compliance with international trade regulations.
|
|||
|
The Criteri Ambientali Minimi (CAM) are environmental requirements defined by the Italian Ministry of Environment and Energy Security (MASE) for various stages of public procurement processes. Their objective is to identify design solutions, products, or services with the best environmental profile across their entire life cycle, considering market availability.
|
|||
|
This CERT provides a comprehensive environmental profile for Florim S.p.A. SB's porcelain stoneware surfaces, detailing their environmental impact throughout the product lifecycle. It aids stakeholders in making informed decisions based on sustainability metrics
|
|||
|
This CERT specifies sustainability requirements, assessment methods, and evaluation schemes for ceramic tiles, encompassing environmental, economic, and social criteria throughout the product's life cycle—from raw material extraction to end-of-life management.
|
|||
|
This CERT is an international standard that specifies requirements for an occupational health and safety (OH&S) management system, aiming to prevent work-related injury and ill health while proactively improving OH&S performance. It provides a framework for organizations, regardless of size, type, or nature, to create safe and healthy workplaces by eliminating hazards and minimizing OH&S risks.
|
|||
|
This CERT provides a framework for organizations to establish, implement, and improve energy management systems, aiming to enhance energy efficiency, reduce costs, and decrease greenhouse gas emissions.
|
|||
|
This CERT provides verified Environmental Product Declarations (EPDs) for building materials, offering transparent information about a product's environmental impact throughout its lifecycle.
|
|||
| Warranty: Lifetime |
99
Florim Ceramiche Color Marble Calacatta A | Florim
Discover the color Marble Calacatta A by Florim: elegance and durability in porcelain stoneware. Visit Florim for more details.Scored Product Attributes
99
|
|
|
Certifications |
|---|---|---|---|
|
The Criteri Ambientali Minimi (CAM) are environmental requirements defined by the Italian Ministry of Environment and Energy Security (MASE) for various stages of public procurement processes. Their objective is to identify design solutions, products, or services with the best environmental profile across their entire life cycle, considering market availability.
|
|||
|
This CERT recognizes businesses that meet high standards of social and environmental performance, accountability and transparency as certified by B Lab.
|
|||
|
This CERT verifies that products meet strict standards for low chemical emissions, contributing to healthier indoor air quality by reducing exposure to pollutants and volatile organic compounds (VOCs).
|
|||
|
This CERT marks conformity with European Union (EU) health, safety, and environmental protection standards. The CE (Conformité Européenne) Marking is required for many products to be sold within the European Economic Area (EEA), ensuring they meet EU regulatory requirements.
|
|||
|
This CERT recognizes businesses with secure and compliant supply chains under the Authorized Economic Operator (AEO) framework. It facilitates faster customs processes, enhances trade security, and ensures compliance with international trade regulations.
|
|||
|
This CERT ensures compliance with the International Organization for Standardization (ISO) standard for environmental management systems (EMS). ISO 14001 provides a framework for organizations to identify, manage, and reduce their environmental impact, ensuring sustainable practices and regulatory compliance
|
|||
|
This CERT provides a comprehensive environmental profile for Florim S.p.A. SB's porcelain stoneware surfaces, detailing their environmental impact throughout the product lifecycle. It aids stakeholders in making informed decisions based on sustainability metrics
|
|||
|
This CERT specifies sustainability requirements, assessment methods, and evaluation schemes for ceramic tiles, encompassing environmental, economic, and social criteria throughout the product's life cycle—from raw material extraction to end-of-life management.
|
|||
|
This CERT is an international standard that specifies requirements for an occupational health and safety (OH&S) management system, aiming to prevent work-related injury and ill health while proactively improving OH&S performance. It provides a framework for organizations, regardless of size, type, or nature, to create safe and healthy workplaces by eliminating hazards and minimizing OH&S risks.
|
|||
|
This CERT provides a framework for organizations to establish, implement, and improve energy management systems, aiming to enhance energy efficiency, reduce costs, and decrease greenhouse gas emissions.
|
|||
|
This CERT provides verified Environmental Product Declarations (EPDs) for building materials, offering transparent information about a product's environmental impact throughout its lifecycle.
|
|||
| Warranty: Lifetime |
99
Florim Ceramiche Color Marble Calacatta Gold A | Florim
Discover the color Marble Calacatta Gold A by Florim: elegance and durability in porcelain stoneware. Visit Florim for more details.Scored Product Attributes
99
|
|
|
Certifications |
|---|---|---|---|
|
This CERT recognizes businesses that meet high standards of social and environmental performance, accountability and transparency as certified by B Lab.
|
|||
|
This CERT verifies that products meet strict standards for low chemical emissions, contributing to healthier indoor air quality by reducing exposure to pollutants and volatile organic compounds (VOCs).
|
|||
|
This CERT marks conformity with European Union (EU) health, safety, and environmental protection standards. The CE (Conformité Européenne) Marking is required for many products to be sold within the European Economic Area (EEA), ensuring they meet EU regulatory requirements.
|
|||
|
This CERT recognizes businesses with secure and compliant supply chains under the Authorized Economic Operator (AEO) framework. It facilitates faster customs processes, enhances trade security, and ensures compliance with international trade regulations.
|
|||
|
This CERT ensures compliance with the International Organization for Standardization (ISO) standard for environmental management systems (EMS). ISO 14001 provides a framework for organizations to identify, manage, and reduce their environmental impact, ensuring sustainable practices and regulatory compliance
|
|||
|
The Criteri Ambientali Minimi (CAM) are environmental requirements defined by the Italian Ministry of Environment and Energy Security (MASE) for various stages of public procurement processes. Their objective is to identify design solutions, products, or services with the best environmental profile across their entire life cycle, considering market availability.
|
|||
|
This CERT provides a comprehensive environmental profile for Florim S.p.A. SB's porcelain stoneware surfaces, detailing their environmental impact throughout the product lifecycle. It aids stakeholders in making informed decisions based on sustainability metrics
|
|||
|
This CERT specifies sustainability requirements, assessment methods, and evaluation schemes for ceramic tiles, encompassing environmental, economic, and social criteria throughout the product's life cycle—from raw material extraction to end-of-life management.
|
|||
|
This CERT is an international standard that specifies requirements for an occupational health and safety (OH&S) management system, aiming to prevent work-related injury and ill health while proactively improving OH&S performance. It provides a framework for organizations, regardless of size, type, or nature, to create safe and healthy workplaces by eliminating hazards and minimizing OH&S risks.
|
|||
|
This CERT provides a framework for organizations to establish, implement, and improve energy management systems, aiming to enhance energy efficiency, reduce costs, and decrease greenhouse gas emissions.
|
|||
|
This CERT provides verified Environmental Product Declarations (EPDs) for building materials, offering transparent information about a product's environmental impact throughout its lifecycle.
|
|||
| Warranty: Lifetime |
99
Florim Ceramiche Color Marble Statuario A | Florim
Discover the color Marble Statuario A by Florim: elegance and durability in porcelain stoneware. Visit Florim for more details.Scored Product Attributes
99
|
|
|
Certifications |
|---|---|---|---|
|
This CERT recognizes businesses with secure and compliant supply chains under the Authorized Economic Operator (AEO) framework. It facilitates faster customs processes, enhances trade security, and ensures compliance with international trade regulations.
|
|||
|
This CERT recognizes businesses that meet high standards of social and environmental performance, accountability and transparency as certified by B Lab.
|
|||
|
This CERT verifies that products meet strict standards for low chemical emissions, contributing to healthier indoor air quality by reducing exposure to pollutants and volatile organic compounds (VOCs).
|
|||
|
This CERT marks conformity with European Union (EU) health, safety, and environmental protection standards. The CE (Conformité Européenne) Marking is required for many products to be sold within the European Economic Area (EEA), ensuring they meet EU regulatory requirements.
|
|||
|
This CERT ensures compliance with the International Organization for Standardization (ISO) standard for environmental management systems (EMS). ISO 14001 provides a framework for organizations to identify, manage, and reduce their environmental impact, ensuring sustainable practices and regulatory compliance
|
|||
|
The Criteri Ambientali Minimi (CAM) are environmental requirements defined by the Italian Ministry of Environment and Energy Security (MASE) for various stages of public procurement processes. Their objective is to identify design solutions, products, or services with the best environmental profile across their entire life cycle, considering market availability.
|
|||
|
This CERT provides a comprehensive environmental profile for Florim S.p.A. SB's porcelain stoneware surfaces, detailing their environmental impact throughout the product lifecycle. It aids stakeholders in making informed decisions based on sustainability metrics
|
|||
|
This CERT specifies sustainability requirements, assessment methods, and evaluation schemes for ceramic tiles, encompassing environmental, economic, and social criteria throughout the product's life cycle—from raw material extraction to end-of-life management.
|
|||
|
This CERT is an international standard that specifies requirements for an occupational health and safety (OH&S) management system, aiming to prevent work-related injury and ill health while proactively improving OH&S performance. It provides a framework for organizations, regardless of size, type, or nature, to create safe and healthy workplaces by eliminating hazards and minimizing OH&S risks.
|
|||
|
This CERT provides a framework for organizations to establish, implement, and improve energy management systems, aiming to enhance energy efficiency, reduce costs, and decrease greenhouse gas emissions.
|
|||
|
This CERT provides verified Environmental Product Declarations (EPDs) for building materials, offering transparent information about a product's environmental impact throughout its lifecycle.
|
|||
| Warranty: Lifetime |
89
Florim Ceramiche Color Blanc | Florim
Discover the color Blanc by Florim: elegance and durability in porcelain stoneware. Visit Florim for more details.Scored Product Attributes
89
|
|
|
Certifications |
|---|---|---|---|
|
This CERT verifies that products meet high standards for low chemical emissions, making them suitable for sensitive environments like schools and healthcare facilities by minimizing exposure to pollutants and volatile organic compounds (VOCs).
|
|||
|
This CERT recognizes businesses that meet high standards of social and environmental performance, accountability and transparency as certified by B Lab.
|
|||
|
This CERT marks conformity with European Union (EU) health, safety, and environmental protection standards. The CE (Conformité Européenne) Marking is required for many products to be sold within the European Economic Area (EEA), ensuring they meet EU regulatory requirements.
|
|||
|
This CERT defines test methods and performance standards for evaluating the slip resistance of hard surface flooring materials. It ensures safety and quality in residential, commercial, and industrial flooring applications.
|
|||
|
This CERT establishes comprehensive methodologies for assessing the slip resistance of surfaces intended for pedestrian use.
|
|||
|
This CERT verifies that ceramic floor tiles meet stringent performance criteria for durability and suitability in various building environments, ensuring their reliability and longevity.
|
|||
|
This CERT evaluates and certifies building products based on their environmental performance and sustainability, promoting the use of eco-friendly materials in Singapore's built environment.
|
|||
| Warranty: Limited Lifetime |
Good To Know - Brand Attributes
Origins
Made in Italy
89
Florim Ceramiche Color Ecru | Florim
Discover the color Ecru by Florim: elegance and durability in porcelain stoneware. Visit Florim for more details.Scored Product Attributes
89
|
|
|
Certifications |
|---|---|---|---|
|
This CERT verifies that products meet high standards for low chemical emissions, making them suitable for sensitive environments like schools and healthcare facilities by minimizing exposure to pollutants and volatile organic compounds (VOCs).
|
|||
|
This CERT recognizes businesses that meet high standards of social and environmental performance, accountability and transparency as certified by B Lab.
|
|||
|
This CERT marks conformity with European Union (EU) health, safety, and environmental protection standards. The CE (Conformité Européenne) Marking is required for many products to be sold within the European Economic Area (EEA), ensuring they meet EU regulatory requirements.
|
|||
|
This CERT defines test methods and performance standards for evaluating the slip resistance of hard surface flooring materials. It ensures safety and quality in residential, commercial, and industrial flooring applications.
|
|||
|
This CERT establishes comprehensive methodologies for assessing the slip resistance of surfaces intended for pedestrian use.
|
|||
|
This CERT verifies that ceramic floor tiles meet stringent performance criteria for durability and suitability in various building environments, ensuring their reliability and longevity.
|
|||
|
This CERT evaluates and certifies building products based on their environmental performance and sustainability, promoting the use of eco-friendly materials in Singapore's built environment.
|
|||
| Warranty: Limited Lifetime |
Good To Know - Brand Attributes
Origins
Made in Italy
89
Florim Ceramiche Color Ivoire | Florim
Discover the color Ivoire by Florim: elegance and durability in porcelain stoneware. Visit Florim for more details.Scored Product Attributes
89
|
|
|
Certifications |
|---|---|---|---|
|
This CERT verifies that products meet high standards for low chemical emissions, making them suitable for sensitive environments like schools and healthcare facilities by minimizing exposure to pollutants and volatile organic compounds (VOCs).
|
|||
|
This CERT recognizes businesses that meet high standards of social and environmental performance, accountability and transparency as certified by B Lab.
|
|||
|
This CERT marks conformity with European Union (EU) health, safety, and environmental protection standards. The CE (Conformité Européenne) Marking is required for many products to be sold within the European Economic Area (EEA), ensuring they meet EU regulatory requirements.
|
|||
|
This CERT defines test methods and performance standards for evaluating the slip resistance of hard surface flooring materials. It ensures safety and quality in residential, commercial, and industrial flooring applications.
|
|||
|
This CERT establishes comprehensive methodologies for assessing the slip resistance of surfaces intended for pedestrian use.
|
|||
|
This CERT verifies that ceramic floor tiles meet stringent performance criteria for durability and suitability in various building environments, ensuring their reliability and longevity.
|
|||
|
This CERT evaluates and certifies building products based on their environmental performance and sustainability, promoting the use of eco-friendly materials in Singapore's built environment.
|
|||
| Warranty: Limited Lifetime |
Good To Know - Brand Attributes
Origins
Made in Italy
99
Malarkey Roofing Windsor Scotchgard
Windsor Scotchgard shingles deliver extreme all-weather resilience, a Class 4 hail impact rating, and algae and smog-reducing granules.Scored Product Attributes
99
|
|
|
Materials |
|---|---|---|---|
Upcycled Rubber |
|
|
|
Certifications |
|---|---|---|---|
|
This CERT provides third-party-verified environmental data on products, based on lifecycle assessment (LCA) in compliance with ISO standards. UL Environmental Product Declaration (EPD) promotes transparency in environmental impact, supporting informed decisions in sustainable design and construction by detailing a product’s environmental footprint.
|
|||
|
This CERT verifies that products meet North American safety standards as tested and certified by Intertek to ensure compliance with electrical, gas and other safety regulations.
|
|||
|
This CERT verifies that products meet rigorous safety and performance standards set by UL, ensuring they have been tested and approved for use in specific environments, such as electrical systems and appliances.
|
|||
|
This CERT verifies that products contain a specified percentage of recycled materials, ensuring they are made from post-consumer or post-industrial waste rather than new resources.
|
|||
|
|
|||
|
This CERT verifies the percentage of waste a company or manufacturing facility successfully diverts from landfills through methods such as reuse, recycling, composting, and waste-to-energy processes, thereby promoting sustainable waste management practices.
|
|||
|
This CERT outlines requirements for Class A asphalt shingles with mineral granules, covering Type I (self-sealing) and Type II (non-self-sealing). It ensures fire resistance, heat behavior, and wind resistance (Type I), confirming their suitability for high-performance, safe roofing.
|
|||
|
This CERT specifies a test method for evaluating the wind resistance of steep slope roofing products, such as asphalt shingles, using a fan-induced procedure. It assesses the product's ability to withstand wind uplift forces, ensuring durability and performance under various wind conditions.
|
|||
|
This CERT specifies the requirements for asphalt roofing shingles made from glass felt and surfaced with mineral granules. It outlines the physical properties, such as tear strength, wind resistance, fire resistance, softening point, and pliability, that shingles must meet immediately after manufacture and before installation.
|
|||
|
This CERT specifies a test method for evaluating the wind resistance of sealed asphalt shingles by calculating the uplift forces exerted by wind and comparing them to the shingles' mechanical uplift resistance. It classifies shingles into three categories—Class D, Class G, and Class H—corresponding to their resistance to basic wind speeds of 115 mph, 150 mph, and 190 mph, respectively.
|
|||
|
This CERT evaluates the impact resistance of roofing materials, classifying them into four categories (Class 1 to Class 4) based on their ability to withstand simulated hail impacts, thereby aiding in the selection of durable roofing solutions.
|
|||
|
ASTM E108 is a Standard Test Method that evaluates the fire resistance of roof coverings when exposed to simulated external fire sources. It assesses the material's ability to resist fire spread, penetration, and the generation of burning embers under controlled conditions.
|
|||
|
This CERT specifies requirements for asphalt shingles made from glass felt, coated with asphalt, and surfaced with mineral granules, ensuring durability and performance for roofing applications.
|
|||
| Warranty: Limited Lifetime |
Good To Know - Brand Attributes
Origins
Made in United States of America
62
Gerflor Nerok Tex - Residential flooring for the home - Gerflor.com
Discover our floor coverings for the home : vinyl tiles and planks with Virtuo and Senso ; vinyl rolls with Texline, Home Comfort and HQR ; laminate with Topsilence.Scored Product Attributes
62
|
|
|
Certifications |
|---|---|---|---|
|
This CERT specifies the health, safety, and energy-saving requirements for various types of floor coverings intended for internal use within buildings.
|
|||
|
This CERT marks conformity with European Union (EU) health, safety, and environmental protection standards. The CE (Conformité Européenne) Marking is required for many products to be sold within the European Economic Area (EEA), ensuring they meet EU regulatory requirements.
|
|||
|
This CERT specifies a method for determining the thickness of different layers in resilient floor coverings, such as vinyl, linoleum, and rubber flooring. This standard ensures accurate measurement of each layer's thickness, which is crucial for assessing the product's quality and performance.
|
|||
|
This CERT specifies a method for measuring the total thickness of resilient floor coverings. This measurement is essential for quality control, ensuring that flooring materials meet specified thickness requirements for performance and durability.
|
|||
|
This CERT specifies a test method for determining the electrical resistance of floor coverings, focusing on their ability to dissipate static electricity. EN 1815 is essential for ensuring that flooring materials minimize static buildup, supporting safety and comfort in residential, commercial, and industrial spaces.
|
|||
|
This CERT verifies that hard surface flooring materials, adhesives, and underlayments meet stringent indoor air quality (IAQ) standards by limiting emissions of volatile organic compounds (VOCs), thereby contributing to healthier indoor environments.
|
|||
|
This CERT specifies a method for assessing the slip resistance of floor coverings using a ramp test, determining the angle at which slipping occurs in high-risk areas.
|
|||
|
This CERT establishes a harmonized procedure for classifying the reaction to fire performance of construction materials within the European Union.
|
|||
|
This CERT specifies methods for determining the thermal properties of homogeneous building materials.
|
|||
|
This CERT standard pecifies methods for measuring the length, width, and straightness of resilient or textile floor coverings in sheet form. Accurate measurement of these dimensions is crucial to ensure proper installation and aesthetic quality of floor coverings.
|
|||
|
This CERT establishes a classification system for these types of floor coverings based on practical requirements for areas and intensity of use.
|
|||
|
This CERT specifies a method for measuring volatile organic compounds (VOCs) in indoor air and emissions from materials used indoors.
|
|||
|
This CERT specifies a method for determining the effect of artificial light on the color of textiles. This method utilizes a xenon arc lamp to simulate natural daylight (D65) and is applicable to textiles of all kinds and in all forms, including white (bleached or optically brightened) textiles.
|
|||
|
This CERT specifies a method for measuring the mass per unit area of resilient floor coverings. This standard is applicable to all forms of resilient flooring materials and is essential for quality control and specification compliance in the flooring industry.
|
|||
|
This CERT specifies a method for assessing the dimensional stability and curling behavior of resilient floor coverings, such as sheets, tiles, or planks, after they have been exposed to heat. This evaluation is crucial for ensuring that flooring materials maintain their shape and lay flat under varying temperature conditions, thereby upholding both aesthetic and functional qualities in installed environments.
|
|||
|
This CERT specifies a procedure for assessing how resilient floor coverings react to chemical substances. This evaluation is crucial for determining the suitability of flooring materials in environments where exposure to chemicals is expected, ensuring both durability and safety.
|
|||
| Warranty: Over 7 - 10 Year |
Good To Know - Brand Attributes
Enviro
"Carbon Reduction Goals Tier 1" refers to the highest level of ambition for carbon reduction targets set by companies. It is often used as a term in sustainability and climate action initiatives, including the Science Based Targets initiative (SBTi). To achieve Tier 1 status, companies must set absolute GHG emissions reduction targets, which means reducing their emissions in absolute terms.
Quality
This brand is ISO 14001 certified, ensuring it follows international standards for effective environmental management systems
Origins
Made in Europe
62
Gerflor HQR | | Looselay Vinyl Flooring Roll
HQR is an ultra thick, vinyl flooring roll with fiber technology for extra comfort and excellent sound insulation.Scored Product Attributes
62
|
|
|
Certifications |
|---|---|---|---|
|
This CERT specifies the health, safety, and energy-saving requirements for various types of floor coverings intended for internal use within buildings.
|
|||
|
This CERT marks conformity with European Union (EU) health, safety, and environmental protection standards. The CE (Conformité Européenne) Marking is required for many products to be sold within the European Economic Area (EEA), ensuring they meet EU regulatory requirements.
|
|||
|
This CERT specifies a procedure for assessing how resilient floor coverings react to chemical substances. This evaluation is crucial for determining the suitability of flooring materials in environments where exposure to chemicals is expected, ensuring both durability and safety.
|
|||
|
This CERT specifies a method for measuring the total thickness of resilient floor coverings. This measurement is essential for quality control, ensuring that flooring materials meet specified thickness requirements for performance and durability.
|
|||
|
This CERT specifies a test method for determining the electrical resistance of floor coverings, focusing on their ability to dissipate static electricity. EN 1815 is essential for ensuring that flooring materials minimize static buildup, supporting safety and comfort in residential, commercial, and industrial spaces.
|
|||
|
This CERT specifies a method for assessing the slip resistance of floor coverings using a ramp test, determining the angle at which slipping occurs in high-risk areas.
|
|||
|
This CERT establishes a harmonized procedure for classifying the reaction to fire performance of construction materials within the European Union.
|
|||
|
This CERT specifies a method for determining the thickness of different layers in resilient floor coverings, such as vinyl, linoleum, and rubber flooring. This standard ensures accurate measurement of each layer's thickness, which is crucial for assessing the product's quality and performance.
|
|||
|
This CERT specifies methods for determining the thermal properties of homogeneous building materials.
|
|||
|
This CERT establishes a classification system for these types of floor coverings based on practical requirements for areas and intensity of use.
|
|||
|
This CERT specifies a method for measuring volatile organic compounds (VOCs) in indoor air and emissions from materials used indoors.
|
|||
|
This CERT specifies a method for determining the effect of artificial light on the color of textiles. This method utilizes a xenon arc lamp to simulate natural daylight (D65) and is applicable to textiles of all kinds and in all forms, including white (bleached or optically brightened) textiles.
|
|||
|
This CERT verifies that hard surface flooring materials, adhesives, and underlayments meet stringent indoor air quality (IAQ) standards by limiting emissions of volatile organic compounds (VOCs), thereby contributing to healthier indoor environments.
|
|||
|
This CERT specifies a method for measuring the mass per unit area of resilient floor coverings. This standard is applicable to all forms of resilient flooring materials and is essential for quality control and specification compliance in the flooring industry.
|
|||
|
This CERT standard pecifies methods for measuring the length, width, and straightness of resilient or textile floor coverings in sheet form. Accurate measurement of these dimensions is crucial to ensure proper installation and aesthetic quality of floor coverings.
|
|||
|
This CERT specifies a method for assessing the dimensional stability and curling behavior of resilient floor coverings, such as sheets, tiles, or planks, after they have been exposed to heat. This evaluation is crucial for ensuring that flooring materials maintain their shape and lay flat under varying temperature conditions, thereby upholding both aesthetic and functional qualities in installed environments.
|
|||
| Warranty: Over 7 - 10 Year |
Good To Know - Brand Attributes
Enviro
"Carbon Reduction Goals Tier 1" refers to the highest level of ambition for carbon reduction targets set by companies. It is often used as a term in sustainability and climate action initiatives, including the Science Based Targets initiative (SBTi). To achieve Tier 1 status, companies must set absolute GHG emissions reduction targets, which means reducing their emissions in absolute terms.
Quality
This brand is ISO 14001 certified, ensuring it follows international standards for effective environmental management systems
Origins
Made in Europe
62
Gerflor Texline | Looselay Vinyl Roll Flooring
The Texline vinyl roll flooring range offers an exclusive selection of decors for a collection at the cutting edge of design.Scored Product Attributes
62
|
|
|
Certifications |
|---|---|---|---|
|
This CERT marks conformity with European Union (EU) health, safety, and environmental protection standards. The CE (Conformité Européenne) Marking is required for many products to be sold within the European Economic Area (EEA), ensuring they meet EU regulatory requirements.
|
|||
|
This CERT specifies a test method for determining the electrical resistance of floor coverings, focusing on their ability to dissipate static electricity. EN 1815 is essential for ensuring that flooring materials minimize static buildup, supporting safety and comfort in residential, commercial, and industrial spaces.
|
|||
|
This CERT specifies a method for assessing the slip resistance of floor coverings using a ramp test, determining the angle at which slipping occurs in high-risk areas.
|
|||
|
This CERT establishes a harmonized procedure for classifying the reaction to fire performance of construction materials within the European Union.
|
|||
|
This CERT specifies the health, safety, and energy-saving requirements for various types of floor coverings intended for internal use within buildings.
|
|||
|
This CERT specifies methods for determining the thermal properties of homogeneous building materials.
|
|||
|
This CERT establishes a classification system for these types of floor coverings based on practical requirements for areas and intensity of use.
|
|||
|
This CERT specifies a method for measuring volatile organic compounds (VOCs) in indoor air and emissions from materials used indoors.
|
|||
|
This CERT specifies a method for determining the effect of artificial light on the color of textiles. This method utilizes a xenon arc lamp to simulate natural daylight (D65) and is applicable to textiles of all kinds and in all forms, including white (bleached or optically brightened) textiles.
|
|||
|
This CERT specifies a method for measuring the mass per unit area of resilient floor coverings. This standard is applicable to all forms of resilient flooring materials and is essential for quality control and specification compliance in the flooring industry.
|
|||
|
This CERT standard pecifies methods for measuring the length, width, and straightness of resilient or textile floor coverings in sheet form. Accurate measurement of these dimensions is crucial to ensure proper installation and aesthetic quality of floor coverings.
|
|||
|
This CERT specifies a procedure for assessing how resilient floor coverings react to chemical substances. This evaluation is crucial for determining the suitability of flooring materials in environments where exposure to chemicals is expected, ensuring both durability and safety.
|
|||
|
This CERT specifies a method for assessing the dimensional stability and curling behavior of resilient floor coverings, such as sheets, tiles, or planks, after they have been exposed to heat. This evaluation is crucial for ensuring that flooring materials maintain their shape and lay flat under varying temperature conditions, thereby upholding both aesthetic and functional qualities in installed environments.
|
|||
|
This CERT specifies a method for determining the thickness of different layers in resilient floor coverings, such as vinyl, linoleum, and rubber flooring. This standard ensures accurate measurement of each layer's thickness, which is crucial for assessing the product's quality and performance.
|
|||
|
This CERT verifies that hard surface flooring materials, adhesives, and underlayments meet stringent indoor air quality (IAQ) standards by limiting emissions of volatile organic compounds (VOCs), thereby contributing to healthier indoor environments.
|
|||
|
This CERT specifies a method for measuring the total thickness of resilient floor coverings. This measurement is essential for quality control, ensuring that flooring materials meet specified thickness requirements for performance and durability.
|
|||
| Warranty: Over 7 - 10 Year |
Good To Know - Brand Attributes
Enviro
"Carbon Reduction Goals Tier 1" refers to the highest level of ambition for carbon reduction targets set by companies. It is often used as a term in sustainability and climate action initiatives, including the Science Based Targets initiative (SBTi). To achieve Tier 1 status, companies must set absolute GHG emissions reduction targets, which means reducing their emissions in absolute terms.
Quality
This brand is ISO 14001 certified, ensuring it follows international standards for effective environmental management systems
Origins
Made in Europe
94
Amerimix Colored Mortar Mix - Amerimix Pre-Blended Mortar Mix
$16.50
Shop now launch
View description
Scored Product Attributes
94
|
|
|
Certifications |
|---|---|---|---|
|
This CERT specifies requirements for blended hydraulic cements, combining materials like slag, pozzolan, or limestone with portland cement to enhance performance in various construction applications.
|
|||
|
This CERT specifies requirements for portland cement, ensuring quality and performance in construction applications.
|
|||
|
This CERT specifies the production, properties, packaging, and testing of packaged, dry, combined materials for concrete and high-strength mortar, ensuring consistent quality for construction applications.
|
|||
|
This CERT specifies minimum construction requirements for masonry structures, including materials, placement, bonding, anchoring, and reinforcement.
|
|||
|
This CERT specifies performance requirements for hydraulic cement used in construction, focusing on durability, strength, and sustainability attributes, without prescribing specific composition, allowing flexibility in raw materials.
|
|||
|
This CERT specifies the procedures for testing the compressive strength of masonry prisms, ensuring structural reliability and consistency in masonry construction.
|
|||
|
This CERT specifies performance requirements for admixtures for use in masonry mortar, focusing on properties like workability, bond strength, and durability to ensure the consistency and performance of mortar in masonry applications.
|
|||
|
This CERT specifies the requirements for masonry cement used in the preparation of mortar, focusing on properties like strength, setting time, and workability to ensure quality and consistency in masonry construction.
|
|||
|
This CERT provides a guide for evaluating the standard specifications for hydraulic cements, offering a framework to understand and interpret cement specifications for consistent application in construction.
|
|||
|
This CERT specifies the test methods for evaluating fresh masonry mortars' properties, including consistency, air content, water retention, and compressive strength, ensuring quality and performance in masonry construction.
|
|||
|
This CERT specifies the requirements for preblended dry mortar mixes for masonry, ensuring consistency, quality, and performance in masonry construction by regulating properties such as workability, strength, and durability.
|
|||
|
This CERT specifies the requirements for hydrated lime used in masonry mortars, focusing on its chemical composition, plasticity, and durability to ensure workability and long-term performance in masonry construction.
|
|||
|
This CERT specifies the requirements for mortar for unit masonry, focusing on its physical properties, such as compressive strength, water retention, and workability, ensuring durability and consistency in masonry construction.
|
|||
|
This CERT specifies the requirements for pigments used in integrally colored concrete, ensuring uniformity, color stability, and compatibility with concrete mixtures for aesthetic and durable construction applications.
|
|||
| Warranty: 1 year |
90
Malarkey Roofing Highlander AR
Highlander AR shingles deliver all-weather resilience, a Class 3 hail impact rating, and granules that reduce algae streaks and smog.Scored Product Attributes
90
|
|
|
Materials |
|---|---|---|---|
Upcycled Rubber |
|
|
|
Certifications |
|---|---|---|---|
|
This CERT specifies the requirements for asphalt roofing shingles made from glass felt and surfaced with mineral granules. It outlines the physical properties, such as tear strength, wind resistance, fire resistance, softening point, and pliability, that shingles must meet immediately after manufacture and before installation.
|
|||
|
This CERT verifies that products meet North American safety standards as tested and certified by Intertek to ensure compliance with electrical, gas and other safety regulations.
|
|||
|
This CERT verifies that products contain a specified percentage of recycled materials, ensuring they are made from post-consumer or post-industrial waste rather than new resources.
|
|||
|
|
|||
|
This CERT provides third-party-verified environmental data on products, based on lifecycle assessment (LCA) in compliance with ISO standards. UL Environmental Product Declaration (EPD) promotes transparency in environmental impact, supporting informed decisions in sustainable design and construction by detailing a product’s environmental footprint.
|
|||
|
This CERT outlines requirements for Class A asphalt shingles with mineral granules, covering Type I (self-sealing) and Type II (non-self-sealing). It ensures fire resistance, heat behavior, and wind resistance (Type I), confirming their suitability for high-performance, safe roofing.
|
|||
|
This CERT specifies a test method for evaluating the wind resistance of steep slope roofing products, such as asphalt shingles, using a fan-induced procedure. It assesses the product's ability to withstand wind uplift forces, ensuring durability and performance under various wind conditions.
|
|||
|
This CERT specifies a test method for evaluating the wind resistance of sealed asphalt shingles by calculating the uplift forces exerted by wind and comparing them to the shingles' mechanical uplift resistance. It classifies shingles into three categories—Class D, Class G, and Class H—corresponding to their resistance to basic wind speeds of 115 mph, 150 mph, and 190 mph, respectively.
|
|||
|
This CERT evaluates the impact resistance of roofing materials, classifying them into four categories (Class 1 to Class 4) based on their ability to withstand simulated hail impacts, thereby aiding in the selection of durable roofing solutions.
|
|||
|
ASTM E108 is a Standard Test Method that evaluates the fire resistance of roof coverings when exposed to simulated external fire sources. It assesses the material's ability to resist fire spread, penetration, and the generation of burning embers under controlled conditions.
|
|||
|
This CERT specifies requirements for asphalt shingles made from glass felt, coated with asphalt, and surfaced with mineral granules, ensuring durability and performance for roofing applications.
|
|||
|
This CERT verifies the percentage of waste a company or manufacturing facility successfully diverts from landfills through methods such as reuse, recycling, composting, and waste-to-energy processes, thereby promoting sustainable waste management practices.
|
|||
| Warranty: Limited Lifetime |
Good To Know - Brand Attributes
Origins
Made in United States of America
90
Malarkey Roofing Vista AR
Vista AR (algae-resistant) shingles deliver excellent all-weather resilience, a Class 4 hail impact rating, and granules that reduce algae streaks and smog.Scored Product Attributes
90
|
|
|
Materials |
|---|---|---|---|
Upcycled Rubber |
|
|
|
Certifications |
|---|---|---|---|
|
This CERT verifies that products meet North American safety standards as tested and certified by Intertek to ensure compliance with electrical, gas and other safety regulations.
|
|||
|
This CERT verifies that products contain a specified percentage of recycled materials, ensuring they are made from post-consumer or post-industrial waste rather than new resources.
|
|||
|
|
|||
|
This CERT provides third-party-verified environmental data on products, based on lifecycle assessment (LCA) in compliance with ISO standards. UL Environmental Product Declaration (EPD) promotes transparency in environmental impact, supporting informed decisions in sustainable design and construction by detailing a product’s environmental footprint.
|
|||
|
This CERT outlines requirements for Class A asphalt shingles with mineral granules, covering Type I (self-sealing) and Type II (non-self-sealing). It ensures fire resistance, heat behavior, and wind resistance (Type I), confirming their suitability for high-performance, safe roofing.
|
|||
|
This CERT specifies a test method for evaluating the wind resistance of steep slope roofing products, such as asphalt shingles, using a fan-induced procedure. It assesses the product's ability to withstand wind uplift forces, ensuring durability and performance under various wind conditions.
|
|||
|
This CERT specifies the requirements for asphalt roofing shingles made from glass felt and surfaced with mineral granules. It outlines the physical properties, such as tear strength, wind resistance, fire resistance, softening point, and pliability, that shingles must meet immediately after manufacture and before installation.
|
|||
|
This CERT specifies a test method for evaluating the wind resistance of sealed asphalt shingles by calculating the uplift forces exerted by wind and comparing them to the shingles' mechanical uplift resistance. It classifies shingles into three categories—Class D, Class G, and Class H—corresponding to their resistance to basic wind speeds of 115 mph, 150 mph, and 190 mph, respectively.
|
|||
|
ASTM E108 is a Standard Test Method that evaluates the fire resistance of roof coverings when exposed to simulated external fire sources. It assesses the material's ability to resist fire spread, penetration, and the generation of burning embers under controlled conditions.
|
|||
|
This CERT evaluates the impact resistance of roofing materials, classifying them into four categories (Class 1 to Class 4) based on their ability to withstand simulated hail impacts, thereby aiding in the selection of durable roofing solutions.
|
|||
|
This CERT specifies requirements for asphalt shingles made from glass felt, coated with asphalt, and surfaced with mineral granules, ensuring durability and performance for roofing applications.
|
|||
|
This CERT verifies the percentage of waste a company or manufacturing facility successfully diverts from landfills through methods such as reuse, recycling, composting, and waste-to-energy processes, thereby promoting sustainable waste management practices.
|
|||
| Warranty: Limited Lifetime |
Good To Know - Brand Attributes
Origins
Made in United States of America
56
GemCore Onyx DAVIDSON
Look and feel of wide plank hardwood flooring for residential and commercial. Super wide 9" plank featuring Embossed In Register (EIR) texture, for an ultra-realistic wood experience, and a robust, commercially rated wear layer. superior stability, dent & heat resistance, and 100% waterproof performance. Distressed.Scored Product Attributes
56
|
|
|
Materials |
|---|---|---|---|
Lead Free |
|||
Cadmium Free |
|||
Asbestos Free |
|||
Copper Free |
|||
Ortho-Phthalates Free |
|
|
|
Certifications |
|---|---|---|---|
|
This CERT verifies that products comply with the California Air Resources Board (CARB) standards for air quality, specifically limiting emissions of formaldehyde and other harmful substances.
|
|||
|
This CERT verifies that products comply with the European Union’s REACH regulation, ensuring they are safe for human health and the environment by controlling harmful chemicals throughout the supply chain.
|
|||
|
This CERT specifies a method for determining the sound transmission class (STC) of building partitions, floors, ceilings, and doors, which is essential for evaluating soundproofing effectiveness. ASTM E413 aids in ensuring acoustic privacy and noise control in various construction applications.
|
|||
|
This CERT outlined a method for measuring the static coefficient of friction of ceramic tiles and similar surfaces under wet and dry conditions using a horizontal dynamometer pull-meter. It aimed to assess slip resistance to ensure safety in various environments.
|
|||
|
This CERT measures the critical radiant flux of floor coverings under radiant heat, assessing flame spread in corridors or exitways during simulated fire conditions for fire safety evaluations.
|
|||
|
This CERT measures the impact sound transmission of floor-ceiling assemblies using a tapping machine, evaluating noise attenuation like footsteps to ensure acoustic comfort in multi-story buildings.
|
|||
|
This CERT evaluates the indentation resistance of resilient floor coverings under concentrated loads, ensuring durability and aesthetic integrity by preventing permanent deformation.
|
|||
|
This CERT evaluates the chemical resistance of resilient flooring materials, ensuring durability and aesthetic retention when exposed to chemical reagents in residential and commercial settings.
|
|||
|
The CDPH Standard Method, formerly known as California Specification 01350, is a protocol developed by the California Department of Public Health (CDPH) for testing and evaluating volatile organic compound (VOC) emissions from indoor materials and products. This standard aims to ensure that building materials contribute to healthy indoor air quality by limiting the release of harmful VOCs.
|
|||
|
This CERT verifies that hard surface flooring materials, adhesives, and underlayments meet stringent indoor air quality (IAQ) standards by limiting emissions of volatile organic compounds (VOCs), thereby contributing to healthier indoor environments.
|
|||
| Warranty: Lifetime |
56
GemCore Sapphire MADISON
Look and feel of wide plank hardwood flooring for residential and commercial. 6" wide planks featuring popular hardwood looks, and a robust, commercially rated wear layer. superior stability, dent & heat resistance, and 100% waterproof performance. Rich brown color.Scored Product Attributes
56
|
|
|
Materials |
|---|---|---|---|
Lead Free |
|||
Cadmium Free |
|||
Asbestos Free |
|||
Copper Free |
|
|
|
Certifications |
|---|---|---|---|
|
This CERT verifies that products comply with the California Air Resources Board (CARB) standards for air quality, specifically limiting emissions of formaldehyde and other harmful substances.
|
|||
|
This CERT verifies that products comply with the European Union’s REACH regulation, ensuring they are safe for human health and the environment by controlling harmful chemicals throughout the supply chain.
|
|||
|
This CERT specifies a method for determining the sound transmission class (STC) of building partitions, floors, ceilings, and doors, which is essential for evaluating soundproofing effectiveness. ASTM E413 aids in ensuring acoustic privacy and noise control in various construction applications.
|
|||
|
This CERT outlined a method for measuring the static coefficient of friction of ceramic tiles and similar surfaces under wet and dry conditions using a horizontal dynamometer pull-meter. It aimed to assess slip resistance to ensure safety in various environments.
|
|||
|
This CERT measures the critical radiant flux of floor coverings under radiant heat, assessing flame spread in corridors or exitways during simulated fire conditions for fire safety evaluations.
|
|||
|
This CERT measures the impact sound transmission of floor-ceiling assemblies using a tapping machine, evaluating noise attenuation like footsteps to ensure acoustic comfort in multi-story buildings.
|
|||
|
This CERT evaluates the indentation resistance of resilient floor coverings under concentrated loads, ensuring durability and aesthetic integrity by preventing permanent deformation.
|
|||
|
This CERT evaluates the chemical resistance of resilient flooring materials, ensuring durability and aesthetic retention when exposed to chemical reagents in residential and commercial settings.
|
|||
|
The CDPH Standard Method, formerly known as California Specification 01350, is a protocol developed by the California Department of Public Health (CDPH) for testing and evaluating volatile organic compound (VOC) emissions from indoor materials and products. This standard aims to ensure that building materials contribute to healthy indoor air quality by limiting the release of harmful VOCs.
|
|||
|
This CERT verifies that hard surface flooring materials, adhesives, and underlayments meet stringent indoor air quality (IAQ) standards by limiting emissions of volatile organic compounds (VOCs), thereby contributing to healthier indoor environments.
|
|||
| Warranty: Lifetime |
52
Tarkett Adaptt - Tarkett Commercial
Adaptt (LVT) Luxury Vinyl Planks and Tiles offer complete design freedom with endless layout possibilities across a broad range of patterns, colorways and installation techniques.Scored Product Attributes
52
|
|
|
Materials |
|---|---|---|---|
Phthalates free |
|
|
|
Certifications |
|---|---|---|---|
|
This CERT measures the effectiveness of floor coverings in reducing impact sound through concrete floors, quantifying noise mitigation by evaluating the improvement in impact insulation class (ΔIIC) over standard slabs.
|
|||
|
This CERT specifies a laboratory test method for measuring the static coefficient of friction (SCOF) of polish-coated flooring surfaces using the James Machine. It establishes a compliance criterion to determine the safety of polished walkway surfaces concerning human locomotion.
|
|||
|
This CERT measures the critical radiant flux of floor coverings under radiant heat, assessing flame spread in corridors or exitways during simulated fire conditions for fire safety evaluations.
|
|||
|
This CERT evaluates the impact resistance of resilient floor tiles like vinyl and asphalt, determining durability and suitability for environments exposed to dropped objects or similar forces.
|
|||
|
This CERT measures the deflection of rigid resilient floor tiles, assessing their ability to conform to uneven subfloors without cracking, ensuring durability and performance in various installations.
|
|||
|
This CERT evaluates the flexibility of resilient flooring using a cylindrical mandrel, assessing the material's ability to withstand bending without cracking or defects, ensuring durability and ease of installation.
|
|||
|
This CERT evaluates the heat stability of resilient flooring by measuring color changes after exposure to high temperatures, ensuring the material maintains appearance and performance under heat.
|
|||
|
This CERT evaluates the chemical resistance of resilient flooring materials, ensuring durability and aesthetic retention when exposed to chemical reagents in residential and commercial settings.
|
|||
|
This CERT measures the light stability of resilient flooring by assessing color changes after light exposure, ensuring the material maintains appearance and performance over time.
|
|||
|
This CERT specifies procedures for measuring the dimensions and squareness of resilient floor tiles, ensuring accuracy for proper installation and maintaining aesthetic quality.
|
|||
|
This CERT verifies that hard surface flooring materials, adhesives, and underlayments meet stringent indoor air quality (IAQ) standards by limiting emissions of volatile organic compounds (VOCs), thereby contributing to healthier indoor environments.
|
|||
|
This CERT evaluates the dimensional stability and curling of resilient flooring after heat exposure, ensuring the material maintains size and flatness under temperature variations during use.
|
|||
|
This CERT evaluates the recovery properties of resilient flooring under prolonged static loads, ensuring durability and resistance to permanent indentations from furniture or equipment.
|
|||
|
This CERT specifies procedures for measuring the thickness of resilient non-textile floor coverings, ensuring accurate quality control and compliance with applicable specifications.
|
|||
| Warranty: Over 7 - 10 Year |
Good To Know - Brand Attributes
Enviro
This brand offers recycling services for its purchased products or for products within the same industry.
"Carbon Reduction Goals Tier 1" refers to the highest level of ambition for carbon reduction targets set by companies. It is often used as a term in sustainability and climate action initiatives, including the Science Based Targets initiative (SBTi). To achieve Tier 1 status, companies must set absolute GHG emissions reduction targets, which means reducing their emissions in absolute terms.
Origins
Made in United States of America
71
Florida Tile Amplify - Ceramic Textured Wall Tile
The patterns featured in these 3-D textured wall tile offerings visually punctuate the personality of this line by creating a dynamic sense of energyScored Product Attributes
71
|
|
|
Certifications |
|---|---|---|---|
|
This CERT verifies that products meet high standards for low chemical emissions, making them suitable for sensitive environments like schools and healthcare facilities by minimizing exposure to pollutants and volatile organic compounds (VOCs).
|
|||
|
This CERT defines performance and quality standards for ceramic tiles, covering manufacturing, testing, and labeling requirements. It ensures consistency, reliability, and durability for tiles in residential, commercial, and industrial applications.
|
|||
|
This CERT specifies a test method for assessing the resistance of ceramic and glass tiles to freeze-thaw cycling. It evaluates the durability of tiles subjected to repeated freezing and thawing, ensuring suitability for exterior applications in cold climates.
|
|||
|
This CERT specifies a test method for determining the resistance of ceramic and glass tiles to staining by exposing them to various staining agents and evaluating the effectiveness of cleaning procedures. It ensures that tile surfaces maintain their aesthetic quality when subjected to common staining substances.
|
|||
|
This CERT specifies a test method for determining the linear thermal expansion of premelted frits—such as porcelain enamel and glaze—and fired ceramic whiteware products using a dilatometer. It provides a standardized procedure to measure how these materials expand when subjected to temperature changes, which is crucial for predicting stress and ensuring the structural integrity of ceramic products in various thermal environments.
|
|||
|
This CERT specifies test methods for determining water absorption, bulk density, apparent porosity, and apparent specific gravity of ceramic and glass tiles. It provides standardized procedures to assess these properties, ensuring tiles meet quality and performance standards for various applications.
|
|||
|
This CERT specifies a test method for determining the bond strength between ceramic tiles—including glazed wall tiles, mosaic tiles, quarry tiles, porcelain tiles, and paver tiles—and Portland cement paste. It provides a standardized procedure to assess the adhesive capability of tiles to cementitious substrates, ensuring durability and performance in various applications.
|
|||
|
This CERT specifies a test method for assessing the thermal shock resistance of glazed ceramic tiles. It evaluates the tiles' ability to withstand rapid temperature changes, ensuring durability in environments subject to thermal fluctuations.
|
|||
|
This CERT specifies a test method for determining the breaking strength of ceramic tiles, including glazed wall tiles, mosaic tiles, quarry tiles, porcelain tiles, and paver tiles. It provides a standardized procedure to assess the force required to cause tile breakage, ensuring products meet quality and performance standards for various applications.
|
|||
|
This CERT defines a test method to assess the resistance of ceramic and glass tiles to chemicals commonly found in household and cleaning environments. It ensures tile durability for applications like food counters, lavatories, and other areas exposed to food, chemicals, and waste.
|
|||
| Warranty: Lifetime |
75
Amerimix Masonry Cement & Sand Mortar Mix - Amerimix AMX 500 Series
Amerimix Masonry Cement & Sand Mortars are factory blended to provide superior water retention and workability vs. field mixes. Request a demo today.Scored Product Attributes
75
|
|
|
Certifications |
|---|---|---|---|
|
This CERT specifies requirements for blended hydraulic cements, combining materials like slag, pozzolan, or limestone with portland cement to enhance performance in various construction applications.
|
|||
|
This CERT specifies the production, properties, packaging, and testing of packaged, dry, combined materials for concrete and high-strength mortar, ensuring consistent quality for construction applications.
|
|||
|
This CERT specifies minimum construction requirements for masonry structures, including materials, placement, bonding, anchoring, and reinforcement.
|
|||
|
This CERT specifies the requirements for pigments used in integrally colored concrete, ensuring uniformity, color stability, and compatibility with concrete mixtures for aesthetic and durable construction applications.
|
|||
|
This CERT specifies performance requirements for hydraulic cement used in construction, focusing on durability, strength, and sustainability attributes, without prescribing specific composition, allowing flexibility in raw materials.
|
|||
|
This CERT specifies the procedures for testing the compressive strength of masonry prisms, ensuring structural reliability and consistency in masonry construction.
|
|||
|
This CERT specifies the requirements for mortar cement used in masonry construction, focusing on performance attributes such as strength, workability, and durability for reliable and consistent masonry applications.
|
|||
|
This CERT specifies performance requirements for admixtures for use in masonry mortar, focusing on properties like workability, bond strength, and durability to ensure the consistency and performance of mortar in masonry applications.
|
|||
|
This CERT provides a guide for evaluating the standard specifications for hydraulic cements, offering a framework to understand and interpret cement specifications for consistent application in construction.
|
|||
|
This CERT specifies the requirements for preblended dry mortar mixes for masonry, ensuring consistency, quality, and performance in masonry construction by regulating properties such as workability, strength, and durability.
|
|||
|
This CERT specifies the requirements for mortar for unit masonry, focusing on its physical properties, such as compressive strength, water retention, and workability, ensuring durability and consistency in masonry construction.
|
|||
|
This CERT specifies the test methods for evaluating fresh masonry mortars' properties, including consistency, air content, water retention, and compressive strength, ensuring quality and performance in masonry construction.
|
|||
| Warranty: 20 - 34 Day |
99
BOEN Beech Transparent Andante,14mm Longstrip 3-Strip| Boen
Live Matt lacquer,unbrushed, square edged,5G Click, controlled sources,14 x 215 x 2200 mm, Toplayer (mm): 3.5 mm,10041645Scored Product Attributes
99
|
|
|
Certifications |
|---|---|---|---|
|
This CERT verifies that products meet high environmental standards for sustainability, health protection and resource conservation as set by the Blue Angel eco-label.
|
|||
|
This CERT verifies that products meet strict environmental standards set by the Nordic Swan Ecolabel that focus on sustainability, reduced environmental impact and responsible resource use throughout the product's lifecycle.
|
|||
|
This CERT verifies that products meet strict standards for low emissions and harmful substances, ensuring they contribute to healthier indoor air quality.
|
|||
|
This CERT verifies that hard surface flooring materials, adhesives, and underlayments meet stringent indoor air quality (IAQ) standards by limiting emissions of volatile organic compounds (VOCs), thereby contributing to healthier indoor environments.
|
|||
| Warranty: Over 20 - 30 Year |
47
COREtec COREtec Originals - Artesia Hickory - Customer Favorite
Discover the beauty of Artesia Hickory VV585-05044 vinyl plank flooring by COREtec. Browse our wide selection of luxury vinyl planks and order samples today!Scored Product Attributes
47
|
|
|
Certifications |
|---|---|---|---|
|
This CERT verifies that products meet high standards for low chemical emissions, making them suitable for sensitive environments like schools and healthcare facilities by minimizing exposure to pollutants and volatile organic compounds (VOCs).
|
|||
|
This CERT ensures accessibility standards compliance under the Americans with Disabilities Act (ADA), covering design, infrastructure, and usability criteria for products and facilities to be accessible to individuals with disabilities.
|
|||
|
This CERT specifies a laboratory test method for measuring the static coefficient of friction (SCOF) of polish-coated flooring surfaces using the James Machine. It establishes a compliance criterion to determine the safety of polished walkway surfaces concerning human locomotion.
|
|||
|
This CERT measures the critical radiant flux of floor coverings under radiant heat, assessing flame spread in corridors or exitways during simulated fire conditions for fire safety evaluations.
|
|||
|
This CERT evaluates the heat stability of resilient flooring by measuring color changes after exposure to high temperatures, ensuring the material maintains appearance and performance under heat.
|
|||
|
This CERT measures the light stability of resilient flooring by assessing color changes after light exposure, ensuring the material maintains appearance and performance over time.
|
|||
|
This CERT evaluates the indentation resistance of resilient floor coverings under concentrated loads, ensuring durability and aesthetic integrity by preventing permanent deformation.
|
|||
|
This CERT evaluates the chemical resistance of resilient flooring materials, ensuring durability and aesthetic retention when exposed to chemical reagents in residential and commercial settings.
|
|||
|
This CERT evaluates the recovery properties of resilient flooring under prolonged static loads, ensuring durability and resistance to permanent indentations from furniture or equipment.
|
|||
| Warranty: Lifetime |
99
Fireclay Tile Egret Gloss | Glass
$35.00
Shop now launch
View description
Scored Product Attributes
99
|
|
|
Certifications |
|---|---|---|---|
|
This CERT recognizes businesses that meet high standards of social and environmental performance, accountability and transparency as certified by B Lab.
|
|||
|
This CERT defines performance standards and testing requirements for glass tiles, ensuring quality and durability in residential, commercial, and industrial applications. It establishes benchmarks for strength, safety, and appearance specific to glass tiles.
|
|||
|
This CERT specifies a test method for assessing the resistance of ceramic and glass tiles to freeze-thaw cycling. It evaluates the durability of tiles subjected to repeated freezing and thawing, ensuring suitability for exterior applications in cold climates.
|
|||
|
This CERT specifies a test method for determining the visible abrasion resistance of glazed ceramic tiles by subjecting them to controlled abrasive actions and assessing surface wear. It ensures tiles meet durability standards for various applications
|
|||
|
This CERT specifies a test method for determining the resistance of ceramic and glass tiles to staining by exposing them to various staining agents and evaluating the effectiveness of cleaning procedures. It ensures that tile surfaces maintain their aesthetic quality when subjected to common staining substances.
|
|||
|
This CERT specifies test methods for determining water absorption, bulk density, apparent porosity, and apparent specific gravity of ceramic and glass tiles. It provides standardized procedures to assess these properties, ensuring tiles meet quality and performance standards for various applications.
|
|||
|
This CERT defines a test method to assess the resistance of ceramic and glass tiles to chemicals commonly found in household and cleaning environments. It ensures tile durability for applications like food counters, lavatories, and other areas exposed to food, chemicals, and waste.
|
|||
|
This CERT provides verified Environmental Product Declarations (EPDs) for building materials, offering transparent information about a product's environmental impact throughout its lifecycle.
|
Good To Know - Brand Attributes
Enviro
This brand uses renewable energy sources such as solar, wind, or hydro power to run its operations.
This brand participates in carbon offset programs to neutralize its carbon emissions.
Governance
This brand is employee-owned, ensuring that the business is run with shared responsibility and benefits among its employees.
Origins
Made in Spokane, Washington, United States of America
99
Fireclay Tile Sparrow Matte | Glass
$40.00
Shop now launch
View description
Scored Product Attributes
99
|
|
|
Certifications |
|---|---|---|---|
|
This CERT recognizes businesses that meet high standards of social and environmental performance, accountability and transparency as certified by B Lab.
|
|||
|
This CERT defines performance standards and testing requirements for glass tiles, ensuring quality and durability in residential, commercial, and industrial applications. It establishes benchmarks for strength, safety, and appearance specific to glass tiles.
|
|||
|
This CERT specifies a test method for assessing the resistance of ceramic and glass tiles to freeze-thaw cycling. It evaluates the durability of tiles subjected to repeated freezing and thawing, ensuring suitability for exterior applications in cold climates.
|
|||
|
This CERT specifies a test method for determining the visible abrasion resistance of glazed ceramic tiles by subjecting them to controlled abrasive actions and assessing surface wear. It ensures tiles meet durability standards for various applications
|
|||
|
This CERT specifies a test method for determining the resistance of ceramic and glass tiles to staining by exposing them to various staining agents and evaluating the effectiveness of cleaning procedures. It ensures that tile surfaces maintain their aesthetic quality when subjected to common staining substances.
|
|||
|
This CERT specifies test methods for determining water absorption, bulk density, apparent porosity, and apparent specific gravity of ceramic and glass tiles. It provides standardized procedures to assess these properties, ensuring tiles meet quality and performance standards for various applications.
|
|||
|
This CERT defines a test method to assess the resistance of ceramic and glass tiles to chemicals commonly found in household and cleaning environments. It ensures tile durability for applications like food counters, lavatories, and other areas exposed to food, chemicals, and waste.
|
|||
|
This CERT provides verified Environmental Product Declarations (EPDs) for building materials, offering transparent information about a product's environmental impact throughout its lifecycle.
|
Good To Know - Brand Attributes
Enviro
This brand uses renewable energy sources such as solar, wind, or hydro power to run its operations.
This brand participates in carbon offset programs to neutralize its carbon emissions.
Governance
This brand is employee-owned, ensuring that the business is run with shared responsibility and benefits among its employees.
Origins
Made in Spokane, Washington, United States of America
99
Fireclay Tile Falcon Gloss | Glass
$35.00
Shop now launch
View description
Scored Product Attributes
99
|
|
|
Certifications |
|---|---|---|---|
|
This CERT recognizes businesses that meet high standards of social and environmental performance, accountability and transparency as certified by B Lab.
|
|||
|
This CERT defines performance standards and testing requirements for glass tiles, ensuring quality and durability in residential, commercial, and industrial applications. It establishes benchmarks for strength, safety, and appearance specific to glass tiles.
|
|||
|
This CERT specifies a test method for assessing the resistance of ceramic and glass tiles to freeze-thaw cycling. It evaluates the durability of tiles subjected to repeated freezing and thawing, ensuring suitability for exterior applications in cold climates.
|
|||
|
This CERT specifies a test method for determining the visible abrasion resistance of glazed ceramic tiles by subjecting them to controlled abrasive actions and assessing surface wear. It ensures tiles meet durability standards for various applications
|
|||
|
This CERT specifies a test method for determining the resistance of ceramic and glass tiles to staining by exposing them to various staining agents and evaluating the effectiveness of cleaning procedures. It ensures that tile surfaces maintain their aesthetic quality when subjected to common staining substances.
|
|||
|
This CERT specifies test methods for determining water absorption, bulk density, apparent porosity, and apparent specific gravity of ceramic and glass tiles. It provides standardized procedures to assess these properties, ensuring tiles meet quality and performance standards for various applications.
|
|||
|
This CERT defines a test method to assess the resistance of ceramic and glass tiles to chemicals commonly found in household and cleaning environments. It ensures tile durability for applications like food counters, lavatories, and other areas exposed to food, chemicals, and waste.
|
|||
|
This CERT provides verified Environmental Product Declarations (EPDs) for building materials, offering transparent information about a product's environmental impact throughout its lifecycle.
|
Good To Know - Brand Attributes
Enviro
This brand uses renewable energy sources such as solar, wind, or hydro power to run its operations.
This brand participates in carbon offset programs to neutralize its carbon emissions.
Governance
This brand is employee-owned, ensuring that the business is run with shared responsibility and benefits among its employees.
Origins
Made in Spokane, Washington, United States of America
93
LITOKOL Starlike EVO
$67.95
Shop now launch
View description
Scored Product Attributes
93
|
|
|
Materials |
|---|---|---|---|
Recycled Content |
|
|
|
Certifications |
|---|---|---|---|
|
This CERT provides third-party-verified environmental data on products, based on lifecycle assessment (LCA) in compliance with ISO standards. UL Environmental Product Declaration (EPD) promotes transparency in environmental impact, supporting informed decisions in sustainable design and construction by detailing a product’s environmental footprint.
|
|||
|
This CERT specifies performance requirements for chemical-resistant, water-cleanable epoxy adhesives and grouts used in tile installations, ensuring durability and resistance to chemicals.
|
|||
|
This CERT specifies the test method to determine the shear adhesion strength of reaction resin adhesives used for ceramic tiles, ensuring their suitability for internal and external wall and floor installations.
|
|||
|
This CERT specifies the test method to determine the chemical resistance of reaction resin mortars used as grouts and adhesives for ceramic tiles, ensuring their durability under anticipated service conditions.
|
|||
|
This CERT specifies the test method to determine the abrasion resistance of ceramic tile grouts, ensuring their durability and suitability for both internal and external wall and floor installations.
|
|||
|
This CERT specifies the test method to determine the flexural and compressive strength of ceramic tile grouts, ensuring their mechanical performance for both internal and external wall and floor installations.
|
|||
|
This CERT specifies the test method to determine the shrinkage of ceramic tile grouts, ensuring their dimensional stability for both internal and external wall and floor installations.
|
|||
|
This CERT specifies the test method to determine the water absorption coefficient due to capillary action in ceramic tile grouts, ensuring their suitability for internal and external wall and floor installations.
|
|||
|
This CERT provides a test method for determining the open time of ceramic tile adhesives. It applies to building materials and ensures quality by helping manufacturers assess adhesive performance for proper tile installation.
|
|||
|
This CERT specifies requirements and test methods for grouts used in ceramic tile installations, ensuring performance and durability.
|
68
Amerimix Tuck Pointing Mortar: Type O Pointing Mortar Mix by Amerimix
$16.50
Shop now launch
View description
Scored Product Attributes
68
|
|
|
Certifications |
|---|---|---|---|
|
This CERT specifies requirements for portland cement, ensuring quality and performance in construction applications.
|
|||
|
This CERT specifies the production, properties, packaging, and testing of packaged, dry, combined materials for concrete and high-strength mortar, ensuring consistent quality for construction applications.
|
|||
|
This CERT specifies requirements for blended hydraulic cements, combining materials like slag, pozzolan, or limestone with portland cement to enhance performance in various construction applications.
|
|||
|
This CERT specifies minimum construction requirements for masonry structures, including materials, placement, bonding, anchoring, and reinforcement.
|
|||
|
This CERT specifies performance requirements for hydraulic cement used in construction, focusing on durability, strength, and sustainability attributes, without prescribing specific composition, allowing flexibility in raw materials.
|
|||
|
This CERT specifies the procedures for testing the compressive strength of masonry prisms, ensuring structural reliability and consistency in masonry construction.
|
|||
|
This CERT specifies performance requirements for admixtures for use in masonry mortar, focusing on properties like workability, bond strength, and durability to ensure the consistency and performance of mortar in masonry applications.
|
|||
|
This CERT provides a guide for evaluating the standard specifications for hydraulic cements, offering a framework to understand and interpret cement specifications for consistent application in construction.
|
|||
|
This CERT specifies the requirements for hydrated lime used in masonry mortars, focusing on its chemical composition, plasticity, and durability to ensure workability and long-term performance in masonry construction.
|
|||
|
This CERT specifies the requirements for mortar for unit masonry, focusing on its physical properties, such as compressive strength, water retention, and workability, ensuring durability and consistency in masonry construction.
|
|||
|
This CERT specifies the requirements for pigments used in integrally colored concrete, ensuring uniformity, color stability, and compatibility with concrete mixtures for aesthetic and durable construction applications.
|
|||
| Warranty: 20 - 34 Day |
44
COREtec COREtec Scratchless - Morningside Oak - Customer Favorite
Discover the beauty of Morningside Oak VV674-05014 vinyl plank flooring by COREtec. Browse our wide selection of luxury vinyl planks and order samples today!Scored Product Attributes
44
|
|
|
Certifications |
|---|---|---|---|
|
This CERT verifies that products meet high standards for low chemical emissions, making them suitable for sensitive environments like schools and healthcare facilities by minimizing exposure to pollutants and volatile organic compounds (VOCs).
|
|||
|
This CERT ensures accessibility standards compliance under the Americans with Disabilities Act (ADA), covering design, infrastructure, and usability criteria for products and facilities to be accessible to individuals with disabilities.
|
|||
|
This CERT specifies a laboratory test method for measuring the static coefficient of friction (SCOF) of polish-coated flooring surfaces using the James Machine. It establishes a compliance criterion to determine the safety of polished walkway surfaces concerning human locomotion.
|
|||
|
This CERT measures the critical radiant flux of floor coverings under radiant heat, assessing flame spread in corridors or exitways during simulated fire conditions for fire safety evaluations.
|
|||
|
This CERT evaluates the heat stability of resilient flooring by measuring color changes after exposure to high temperatures, ensuring the material maintains appearance and performance under heat.
|
|||
|
This CERT measures the light stability of resilient flooring by assessing color changes after light exposure, ensuring the material maintains appearance and performance over time.
|
|||
|
This CERT evaluates the chemical resistance of resilient flooring materials, ensuring durability and aesthetic retention when exposed to chemical reagents in residential and commercial settings.
|
|||
|
This CERT evaluates the recovery properties of resilient flooring under prolonged static loads, ensuring durability and resistance to permanent indentations from furniture or equipment.
|
|||
| Warranty: Lifetime |
44
COREtec COREtec Originals - Flaxen Ash - Customer Pick
$11.79
Shop now launch
View description
Scored Product Attributes
44
|
|
|
Certifications |
|---|---|---|---|
|
This CERT verifies that products meet high standards for low chemical emissions, making them suitable for sensitive environments like schools and healthcare facilities by minimizing exposure to pollutants and volatile organic compounds (VOCs).
|
|||
|
This CERT ensures accessibility standards compliance under the Americans with Disabilities Act (ADA), covering design, infrastructure, and usability criteria for products and facilities to be accessible to individuals with disabilities.
|
|||
|
This CERT specifies a laboratory test method for measuring the static coefficient of friction (SCOF) of polish-coated flooring surfaces using the James Machine. It establishes a compliance criterion to determine the safety of polished walkway surfaces concerning human locomotion.
|
|||
|
This CERT measures the critical radiant flux of floor coverings under radiant heat, assessing flame spread in corridors or exitways during simulated fire conditions for fire safety evaluations.
|
|||
|
This CERT measures the optical density of smoke produced by materials up to 1 inch thick during pyrolysis and combustion, assessing smoke accumulation and light attenuation in a closed chamber.
|
|||
|
This CERT evaluates the heat stability of resilient flooring by measuring color changes after exposure to high temperatures, ensuring the material maintains appearance and performance under heat.
|
|||
|
This CERT measures the light stability of resilient flooring by assessing color changes after light exposure, ensuring the material maintains appearance and performance over time.
|
|||
|
This CERT evaluates the chemical resistance of resilient flooring materials, ensuring durability and aesthetic retention when exposed to chemical reagents in residential and commercial settings.
|
|||
| Warranty: Lifetime |
43
Armstrong Flooring American Charm Oak Luxury Vinyl Tile U5039
View features, specs and warranty information for Linen Breeze 6 in. Oak Luxury Vinyl Tile and other products from the American Charm Collection.Scored Product Attributes
43
|
|
|
Materials |
|---|---|---|---|
Recycled Content |
|
|
|
Certifications |
|---|---|---|---|
|
This CERT evaluates the heat stability of resilient flooring by measuring color changes after exposure to high temperatures, ensuring the material maintains appearance and performance under heat.
|
|||
|
This CERT measures the critical radiant flux of floor coverings under radiant heat, assessing flame spread in corridors or exitways during simulated fire conditions for fire safety evaluations.
|
|||
|
This CERT measures the optical density of smoke produced by materials up to 1 inch thick during pyrolysis and combustion, assessing smoke accumulation and light attenuation in a closed chamber.
|
|||
|
This CERT evaluates the flexibility of resilient flooring using a cylindrical mandrel, assessing the material's ability to withstand bending without cracking or defects, ensuring durability and ease of installation.
|
|||
|
This CERT measures the light stability of resilient flooring by assessing color changes after light exposure, ensuring the material maintains appearance and performance over time.
|
|||
|
This CERT specifies procedures for measuring the dimensions and squareness of resilient floor tiles, ensuring accuracy for proper installation and maintaining aesthetic quality.
|
|||
|
This CERT evaluates the dimensional stability and curling of resilient flooring after heat exposure, ensuring the material maintains size and flatness under temperature variations during use.
|
|||
|
This CERT specifies procedures for measuring the thickness of resilient non-textile floor coverings, ensuring accurate quality control and compliance with applicable specifications.
|
|||
|
This CERT evaluates the chemical resistance of resilient flooring materials, ensuring durability and aesthetic retention when exposed to chemical reagents in residential and commercial settings.
|
|||
|
This CERT evaluates the recovery properties of resilient flooring under prolonged static loads, ensuring durability and resistance to permanent indentations from furniture or equipment.
|
|||
|
This CERT verifies that hard surface flooring materials, adhesives, and underlayments meet stringent indoor air quality (IAQ) standards by limiting emissions of volatile organic compounds (VOCs), thereby contributing to healthier indoor environments.
|
|||
| Warranty: Over 14 - 20 Year |
Good To Know - Brand Attributes
Origins
Made in United States of America
43
Armstrong Flooring American Charm Oak Luxury Vinyl Tile U5042
View features, specs and warranty information for Emberglow Brown 6 in. Oak Luxury Vinyl Tile and other products from the American Charm Collection.Scored Product Attributes
43
|
|
|
Materials |
|---|---|---|---|
Recycled Content |
|
|
|
Certifications |
|---|---|---|---|
|
This CERT measures the critical radiant flux of floor coverings under radiant heat, assessing flame spread in corridors or exitways during simulated fire conditions for fire safety evaluations.
|
|||
|
This CERT measures the optical density of smoke produced by materials up to 1 inch thick during pyrolysis and combustion, assessing smoke accumulation and light attenuation in a closed chamber.
|
|||
|
This CERT evaluates the flexibility of resilient flooring using a cylindrical mandrel, assessing the material's ability to withstand bending without cracking or defects, ensuring durability and ease of installation.
|
|||
|
This CERT evaluates the heat stability of resilient flooring by measuring color changes after exposure to high temperatures, ensuring the material maintains appearance and performance under heat.
|
|||
|
This CERT measures the light stability of resilient flooring by assessing color changes after light exposure, ensuring the material maintains appearance and performance over time.
|
|||
|
This CERT specifies procedures for measuring the dimensions and squareness of resilient floor tiles, ensuring accuracy for proper installation and maintaining aesthetic quality.
|
|||
|
This CERT evaluates the dimensional stability and curling of resilient flooring after heat exposure, ensuring the material maintains size and flatness under temperature variations during use.
|
|||
|
This CERT specifies procedures for measuring the thickness of resilient non-textile floor coverings, ensuring accurate quality control and compliance with applicable specifications.
|
|||
|
This CERT evaluates the chemical resistance of resilient flooring materials, ensuring durability and aesthetic retention when exposed to chemical reagents in residential and commercial settings.
|
|||
|
This CERT evaluates the recovery properties of resilient flooring under prolonged static loads, ensuring durability and resistance to permanent indentations from furniture or equipment.
|
|||
|
This CERT verifies that hard surface flooring materials, adhesives, and underlayments meet stringent indoor air quality (IAQ) standards by limiting emissions of volatile organic compounds (VOCs), thereby contributing to healthier indoor environments.
|
|||
| Warranty: Over 14 - 20 Year |
Good To Know - Brand Attributes
Origins
Made in United States of America