Building Materials
619 ProductsEach time you see a score on Eqogo, remember that it is relative to its product category. What does this mean?
Select 2 to 5 items to compare in detail.
55
QUIKRETE FastSet Repair Mortar | QUIKRETE: Cement and Concrete Products
The QUIKRETE Companies are the largest manufacturers of packaged concrete in the United States and an innovative leader in the commercial building and home improvement industries.Scored Product Attributes
55
 |
 |
 |
Certifications |
|---|---|---|---|
|
This CERT specifies a test method for determining the compressive strength of hydraulic cement mortars using 2-inch (50 mm) cube specimens. It provides a standardized procedure to assess the strength development of cementitious materials, ensuring consistency and reliability in quality control and specification compliance.
|
|||
|
This CERT specifies laboratory procedures to assess the durability of concrete specimens under rapid freezing and thawing cycles, evaluating their resistance to such conditions.
|
|||
|
This CERT specifies a standardized test method for determining the length change of hardened hydraulic-cement mortar and concrete specimens due to factors other than externally applied forces and temperature variations, ensuring quality control in construction materials.
|
|||
|
This CERT provides a standardized test method for evaluating the tensile strength of concrete surfaces and the bond strength of repair or overlay materials by direct tension (pull-off method), ensuring quality and durability in construction applications.
|
|||
|
This CERT specifies standardized test methods for determining the time of setting of hydraulic cement using the Vicat needle apparatus. It provides two methods: Method A, which utilizes a manually operated Vicat apparatus, and Method B, which permits the use of an automatic Vicat machine that has demonstrated acceptable performance.
|
|||
|
This CERT is a standard specification that defines the quality and grading requirements for fine and coarse aggregates used in concrete. It ensures aggregates are suitable for producing high-quality concrete by setting limits on deleterious substances and particle size distribution.
|
|||
|
This CERT specifies the procedure for determining the bond strength of epoxy-resin-based bonding systems used with portland-cement concrete, assessing the effectiveness of these systems in adhering hardened concrete to either hardened or freshly mixed concrete.
|
|||
|
This CERT specifies the requirements for packaged, dry, rapid-hardening cementitious materials intended for repairing hardened hydraulic-cement concrete pavements and structures. It ensures that such materials meet specific performance criteria for effective and durable repairs.
|
|||
|
This CERT specifies the test method for determining the flow of hydraulic cement mortars using a flow table, ensuring consistency, workability, and uniformity in mortar applications.
|
|||
|
This CERT specifies the test method for evaluating the scaling resistance of concrete surfaces exposed to deicing chemicals, ensuring durability and performance under freeze-thaw cycles in harsh climates.
|
|||
| Warranty: 1 year |
48
Florida Tile Emotive - Glazed Ceramic Tile | Wall Tile
This collection of glazed ceramic tile beautifully links art, aesthetics, and the built environment, offering a full range of both neutral and dramatic colors, shapes, and textures.Scored Product Attributes
48
|
|
|
Certifications |
|---|---|---|---|
|
This CERT defines performance and quality standards for ceramic tiles, covering manufacturing, testing, and labeling requirements. It ensures consistency, reliability, and durability for tiles in residential, commercial, and industrial applications.
|
|||
|
This CERT specifies a test method for determining the resistance of ceramic and glass tiles to staining by exposing them to various staining agents and evaluating the effectiveness of cleaning procedures. It ensures that tile surfaces maintain their aesthetic quality when subjected to common staining substances.
|
|||
|
This CERT specifies a test method for determining the linear thermal expansion of premelted frits—such as porcelain enamel and glaze—and fired ceramic whiteware products using a dilatometer. It provides a standardized procedure to measure how these materials expand when subjected to temperature changes, which is crucial for predicting stress and ensuring the structural integrity of ceramic products in various thermal environments.
|
|||
|
This CERT specifies test methods for determining water absorption, bulk density, apparent porosity, and apparent specific gravity of ceramic and glass tiles. It provides standardized procedures to assess these properties, ensuring tiles meet quality and performance standards for various applications.
|
|||
|
This CERT specifies a test method for determining the bond strength between ceramic tiles—including glazed wall tiles, mosaic tiles, quarry tiles, porcelain tiles, and paver tiles—and Portland cement paste. It provides a standardized procedure to assess the adhesive capability of tiles to cementitious substrates, ensuring durability and performance in various applications.
|
|||
|
This CERT specifies a test method for assessing the thermal shock resistance of glazed ceramic tiles. It evaluates the tiles' ability to withstand rapid temperature changes, ensuring durability in environments subject to thermal fluctuations.
|
|||
|
This CERT specifies a test method for determining the breaking strength of ceramic tiles, including glazed wall tiles, mosaic tiles, quarry tiles, porcelain tiles, and paver tiles. It provides a standardized procedure to assess the force required to cause tile breakage, ensuring products meet quality and performance standards for various applications.
|
|||
|
This CERT defines a test method to assess the resistance of ceramic and glass tiles to chemicals commonly found in household and cleaning environments. It ensures tile durability for applications like food counters, lavatories, and other areas exposed to food, chemicals, and waste.
|
|||
| Warranty: Lifetime |
86
Aggregate Industries WeatherMix
WeatherMix has been specially developed to support and extend the construction season into the winter months. WeatherMix is specifically designed to tolerate colder conditions than normal concrete. It is formulated to allow placement of concrete across a range of ambient temperatures from +3°C to zero.Scored Product Attributes
86
|
|
|
Certifications |
|---|---|---|---|
|
This CERT verifies that products comply with the European Union’s REACH regulation, ensuring they are safe for human health and the environment by controlling harmful chemicals throughout the supply chain.
|
|||
|
This CERT marks conformity with European Union (EU) health, safety, and environmental protection standards. The CE (Conformité Européenne) Marking is required for many products to be sold within the European Economic Area (EEA), ensuring they meet EU regulatory requirements.
|
|||
|
This CERT is an international standard that specifies requirements for an occupational health and safety (OH&S) management system, aiming to prevent work-related injury and ill health while proactively improving OH&S performance. It provides a framework for organizations, regardless of size, type, or nature, to create safe and healthy workplaces by eliminating hazards and minimizing OH&S risks.
|
|||
|
This CERT evaluates responsible sourcing of construction materials, ensuring sustainability and ethical practices throughout the supply chain. BES 6001 applies to building materials like concrete, timber, and steel, emphasizing environmental, social, and economic sustainability.
|
86
Aggregate Industries Basecrete
A ready-mixed concrete, specially designed as a durable direct floor finish, or as a substrate to screed.Scored Product Attributes
86
|
|
|
Certifications |
|---|---|---|---|
|
This CERT verifies that products comply with the European Union’s REACH regulation, ensuring they are safe for human health and the environment by controlling harmful chemicals throughout the supply chain.
|
|||
|
This CERT marks conformity with European Union (EU) health, safety, and environmental protection standards. The CE (Conformité Européenne) Marking is required for many products to be sold within the European Economic Area (EEA), ensuring they meet EU regulatory requirements.
|
|||
|
This CERT is an international standard that specifies requirements for an occupational health and safety (OH&S) management system, aiming to prevent work-related injury and ill health while proactively improving OH&S performance. It provides a framework for organizations, regardless of size, type, or nature, to create safe and healthy workplaces by eliminating hazards and minimizing OH&S risks.
|
|||
|
This CERT evaluates responsible sourcing of construction materials, ensuring sustainability and ethical practices throughout the supply chain. BES 6001 applies to building materials like concrete, timber, and steel, emphasizing environmental, social, and economic sustainability.
|
99
Accoya Accoya Lumber | Capitol City Lumber
$18.05
Shop now launch
View description
Scored Product Attributes
99
|
|
|
Materials |
|---|---|---|---|
Recyclable Wood |
|
|
|
Certifications |
|---|---|---|---|
|
This CERT verifies that products meet the Cradle to Cradle standards at the Gold level, demonstrating advanced performance in material health, material reutilization, renewable energy, water stewardship and social fairness.
|
|||
|
This CERT is a globally recognized system by the Forest Stewardship Council (FSC) that ensures wood, paper, and other forest-based products are sourced responsibly. This certification verifies that materials come from FSC-certified forests or other controlled sources and are tracked throughout the supply chain, from harvesting to manufacturing, distribution, and final sale.
|
|||
| Warranty: Lifetime |
Good To Know - Brand Attributes
Enviro
This brand uses renewable energy sources such as solar, wind, or hydro power to run its operations.
This brand conducts Life Cycle Analysis (LCA) for its products to assess their environmental impact from production to disposal.
This brand is LEED certified, demonstrating its commitment to sustainable building practices and energy efficiency.
This brand supports initiatives to protect water resources and reduce water consumption.
Quality
This brand or its factories are ISO 9001 certified, demonstrating its commitment to quality management standards.
99
Next Day Steel T10 Rebar - 10mm High Tensile Reinforcement Bar
T10 Rebar, High tensile steel reinforcement bar aka, 10mm Rebar. The Best Prices Guaranteed! Fastest Lead Time With Express Delivery When Needed! Instant Service Via Our LIVE CHAT!Scored Product Attributes
99
|
|
|
Certifications |
|---|---|---|---|
|
This CERT marks conformity with European Union (EU) health, safety, and environmental protection standards. The CE (Conformité Européenne) Marking is required for many products to be sold within the European Economic Area (EEA), ensuring they meet EU regulatory requirements.
|
|||
|
This CERT specifies requirements for ribbed weldable reinforcing steel used in concrete, detailing grades, mechanical properties, and testing methods. Applicable to construction, infrastructure, and precast concrete industries.
|
|||
|
This CERT signifies that reinforcing steel products meet stringent quality, sustainability, and traceability standards set by the UK Certification Authority for Reinforcing Steels (CARES). Applicable to construction, infrastructure, and precast concrete industries.
|
|||
|
This CERT, Eco-Reinforcement, is a third-party certification scheme ensuring that reinforcing steel products are responsibly sourced and comply with sustainability standards.
|
|||
| Warranty: 1 - 19 Day |
99
Cotto d'Este STARLIGHT Collection | Cotto d'Este Flooring and Cladding
Eight of the rarest and finest natural marbles are the inspiration for Starlight, a Kerlite 3plus laminated porcelain stoneware collection that balances elegance and sumptuousness, modesty and opulence. The most sophisticated decorative technology takes the realism of reproduction to a higher level: the extremely high graphic definition, attention to mineral details, and intense colours arouse wonder and surprise with the sense of authenticity they convey.Scored Product Attributes
99
|
|
|
Certifications |
|---|---|---|---|
|
This CERT verifies that products meet high standards for low chemical emissions, making them suitable for sensitive environments like schools and healthcare facilities by minimizing exposure to pollutants and volatile organic compounds (VOCs).
|
|||
|
This CERT marks conformity with European Union (EU) health, safety, and environmental protection standards. The CE (Conformité Européenne) Marking is required for many products to be sold within the European Economic Area (EEA), ensuring they meet EU regulatory requirements.
|
|||
|
|
|||
|
This CERT provides third-party verification of Environmental Product Declarations (EPDs) for construction products, aligning with ISO 14025 and EN 15804 standards. BRE Global Verified EPD assesses the environmental impact of products over their lifecycle, helping architects, builders, and regulators make sustainable choices in building materials.
|
|||
|
This CERT is a voluntary European quality mark indicating that products and services comply with European Standards, enhancing consumer confidence and market acceptance.
|
|||
| Warranty: Over 14 - 20 Year |
Good To Know - Brand Attributes
Enviro
This brand conducts Life Cycle Analysis (LCA) for its products to assess their environmental impact from production to disposal.
This brand participates in carbon offset programs to neutralize its carbon emissions.
This brand supports initiatives to protect water resources and reduce water consumption.
Quality
This brand or its factories are ISO 9001 certified, demonstrating its commitment to quality management standards.
This brand is ISO 14001 certified, ensuring it follows international standards for effective environmental management systems
99
Cotto d'Este ALLURE Collection | Cotto d'Este Flooring and Cladding
Allure explores the mineral heart of one of the purest and noblest materials: marble. The collections six ceramic surfaces are grouped together in two speci...Scored Product Attributes
99
|
|
|
Certifications |
|---|---|---|---|
|
This CERT verifies that products meet high standards for low chemical emissions, making them suitable for sensitive environments like schools and healthcare facilities by minimizing exposure to pollutants and volatile organic compounds (VOCs).
|
|||
|
This CERT marks conformity with European Union (EU) health, safety, and environmental protection standards. The CE (Conformité Européenne) Marking is required for many products to be sold within the European Economic Area (EEA), ensuring they meet EU regulatory requirements.
|
|||
|
|
|||
|
This CERT provides third-party verification of Environmental Product Declarations (EPDs) for construction products, aligning with ISO 14025 and EN 15804 standards. BRE Global Verified EPD assesses the environmental impact of products over their lifecycle, helping architects, builders, and regulators make sustainable choices in building materials.
|
|||
|
This CERT is a voluntary European quality mark indicating that products and services comply with European Standards, enhancing consumer confidence and market acceptance.
|
|||
| Warranty: Over 14 - 20 Year |
Good To Know - Brand Attributes
Enviro
This brand conducts Life Cycle Analysis (LCA) for its products to assess their environmental impact from production to disposal.
This brand participates in carbon offset programs to neutralize its carbon emissions.
This brand supports initiatives to protect water resources and reduce water consumption.
Quality
This brand or its factories are ISO 9001 certified, demonstrating its commitment to quality management standards.
This brand is ISO 14001 certified, ensuring it follows international standards for effective environmental management systems
99
Cotto d'Este VANITY Collection | Cotto d'Este Flooring and Cladding
Kerlite Vanity is a collection of ceramic surfaces that feature the beauty of the most elegant, minimalist forms of marble. Subtle patterns, light veins and soft shading make up the designs of this collection, which has taken its inspiration from the stone used in the most inspiring examples of classical culture.Scored Product Attributes
99
|
|
|
Certifications |
|---|---|---|---|
|
This CERT verifies that products meet high standards for low chemical emissions, making them suitable for sensitive environments like schools and healthcare facilities by minimizing exposure to pollutants and volatile organic compounds (VOCs).
|
|||
|
This CERT marks conformity with European Union (EU) health, safety, and environmental protection standards. The CE (Conformité Européenne) Marking is required for many products to be sold within the European Economic Area (EEA), ensuring they meet EU regulatory requirements.
|
|||
|
|
|||
|
This CERT provides third-party verification of Environmental Product Declarations (EPDs) for construction products, aligning with ISO 14025 and EN 15804 standards. BRE Global Verified EPD assesses the environmental impact of products over their lifecycle, helping architects, builders, and regulators make sustainable choices in building materials.
|
|||
|
This CERT is a voluntary European quality mark indicating that products and services comply with European Standards, enhancing consumer confidence and market acceptance.
|
|||
| Warranty: Over 14 - 20 Year |
Good To Know - Brand Attributes
Enviro
This brand conducts Life Cycle Analysis (LCA) for its products to assess their environmental impact from production to disposal.
This brand participates in carbon offset programs to neutralize its carbon emissions.
This brand supports initiatives to protect water resources and reduce water consumption.
Quality
This brand or its factories are ISO 9001 certified, demonstrating its commitment to quality management standards.
This brand is ISO 14001 certified, ensuring it follows international standards for effective environmental management systems
47
Cotto d'Este SECRET STONE Collection | Cotto d'Este Flooring and Cladding
A Middle Eastern mystery of elegance and harmony, written in the secret of the stone and guarded by the desert sands, unearthed by Cotto dEste. Secret Stone i...Scored Product Attributes
47
|
|
|
Materials |
|---|---|---|---|
Recycled Materials |
|
|
|
Certifications |
|---|---|---|---|
|
This CERT verifies that products meet high standards for low chemical emissions, making them suitable for sensitive environments like schools and healthcare facilities by minimizing exposure to pollutants and volatile organic compounds (VOCs).
|
|||
|
This CERT marks conformity with European Union (EU) health, safety, and environmental protection standards. The CE (Conformité Européenne) Marking is required for many products to be sold within the European Economic Area (EEA), ensuring they meet EU regulatory requirements.
|
|||
|
|
|||
|
This CERT provides third-party verification of Environmental Product Declarations (EPDs) for construction products, aligning with ISO 14025 and EN 15804 standards. BRE Global Verified EPD assesses the environmental impact of products over their lifecycle, helping architects, builders, and regulators make sustainable choices in building materials.
|
|||
| Warranty: Over 14 - 20 Year |
Good To Know - Brand Attributes
Enviro
This brand conducts Life Cycle Analysis (LCA) for its products to assess their environmental impact from production to disposal.
This brand participates in carbon offset programs to neutralize its carbon emissions.
This brand supports initiatives to protect water resources and reduce water consumption.
Quality
This brand or its factories are ISO 9001 certified, demonstrating its commitment to quality management standards.
This brand is ISO 14001 certified, ensuring it follows international standards for effective environmental management systems
52
IKO IKO Dynasty Shingles | Laminated Shingles
IKO's Dynasty premium laminate shingles offer protection from inclement weather and boost curb appeal. Lifetime Limited Warranty!Scored Product Attributes
52
|
|
|
Certifications |
|---|---|---|---|
|
This CERT outlines requirements for Class A asphalt shingles with mineral granules, covering Type I (self-sealing) and Type II (non-self-sealing). It ensures fire resistance, heat behavior, and wind resistance (Type I), confirming their suitability for high-performance, safe roofing.
|
|||
|
This CERT specifies a test method for evaluating the wind resistance of steep slope roofing products, such as asphalt shingles, using a fan-induced procedure. It assesses the product's ability to withstand wind uplift forces, ensuring durability and performance under various wind conditions.
|
|||
|
This CERT specifies the requirements for asphalt roofing shingles made from glass felt and surfaced with mineral granules. It outlines the physical properties, such as tear strength, wind resistance, fire resistance, softening point, and pliability, that shingles must meet immediately after manufacture and before installation.
|
|||
|
This CERT specifies a test method for evaluating the wind resistance of sealed asphalt shingles by calculating the uplift forces exerted by wind and comparing them to the shingles' mechanical uplift resistance. It classifies shingles into three categories—Class D, Class G, and Class H—corresponding to their resistance to basic wind speeds of 115 mph, 150 mph, and 190 mph, respectively.
|
|||
|
ASTM E108 is a Standard Test Method that evaluates the fire resistance of roof coverings when exposed to simulated external fire sources. It assesses the material's ability to resist fire spread, penetration, and the generation of burning embers under controlled conditions.
|
|||
|
This CERT specifies requirements for asphalt shingles made from glass felt, coated with asphalt, and surfaced with mineral granules, ensuring durability and performance for roofing applications.
|
|||
|
This CERT specifies a procedure for assessing the impact resistance of new rigid roofing materials by subjecting them to impacts from freezer ice balls, simulating hail conditions to evaluate durability.
|
|||
|
This CERT evaluates the fire resistance of roofing materials, classifying them into three categories—Class A, B, or C—based on their performance against external fire exposures, thereby aiding in the selection of appropriate roofing systems for varying fire risk scenarios.
|
|||
| Warranty: Limited Lifetime |
Good To Know - Brand Attributes
Social
This brand publishes a Modern Slavery Statement, demonstrating its commitment to preventing forced labor and human trafficking in its supply chain.
88
Mitten Building Products West Ridge
The West Ridge of Mt. Everest is known as one of the longest and most difficult routes on the mountain. Only a handful of people have ever summited the route and it requires incredible commitment, planning and teamwork.Scored Product Attributes
88
|
|
|
Certifications |
|---|---|---|---|
|
This CERT provides test methods for evaluating the fire-resistance of building materials and assemblies, assessing their ability to contain fire and withstand high temperatures. ASTM E119 is critical for ensuring the safety of structural components in buildings, particularly in fire-rated construction.
|
|||
|
This CERT outlines a standard test method for assessing the surface burning characteristics of building materials. ASTM E84, also known as the "Steiner Tunnel Test," measures flame spread and smoke development, essential for determining the fire safety of materials used in construction
|
|||
|
This CERT specifies test methods for measuring the water vapor transmission rate (WVTR) of materials, particularly in building applications where moisture control is critical. ASTM E96 ensures materials have adequate moisture resistance, supporting durability and performance in environments prone to humidity.
|
|||
|
This CERT specifies a standardized test method for evaluating the thermal performance of building materials and envelope assemblies using a hot box apparatus, ensuring accurate measurement of heat transfer properties in construction elements.
|
|||
|
This CERT specifies the standard test method for determining the ignition temperature of plastics using a hot-air furnace.
|
|||
|
This CERT outlines the standard practice for calculating color differences and tolerances from instrumentally measured color coordinates, ensuring consistency in color quality assessments across various industries.
|
|||
|
This CERT ensures that PVC siding products meet specific criteria for materials, dimensions, warp, shrinkage, impact strength, expansion, appearance, and wind load resistance.
|
|||
|
This CERT specifies the requirements for rigid poly(vinyl chloride) (PVC) and chlorinated poly(vinyl chloride) (CPVC) compounds used in building products, ensuring materials meet criteria for impact resistance, tensile strength, and thermal properties.
|
|||
| Warranty: Limited Lifetime |
52
CertainTeed Patriot | CertainTeed
CertainTeed Patriot™ shingles offer a blend of classic charm and lasting performance. Featuring a dual-layered design reminiscent of natural wood shake, these shingles offer a range of standout colors for your personalized home design. Discover unmatched dependability and a worry-free roofing solution built to stand the test of time.Scored Product Attributes
52
|
|
|
Certifications |
|---|---|---|---|
|
This CERT verifies that products meet rigorous safety and performance standards set by UL, ensuring they have been tested and approved for use in specific environments, such as electrical systems and appliances.
|
|||
|
This CERT specifies the requirements for asphalt-saturated organic felts used in roofing and waterproofing applications. It defines two types of felts: Type I, commonly known as No. 15 asphalt felt, and Type II, known as No. 30 asphalt felt.
|
|||
|
This CERT outlines requirements for Class A asphalt shingles with mineral granules, covering Type I (self-sealing) and Type II (non-self-sealing). It ensures fire resistance, heat behavior, and wind resistance (Type I), confirming their suitability for high-performance, safe roofing.
|
|||
|
This CERT specifies the requirements for asphalt roofing shingles made from glass felt and surfaced with mineral granules. It outlines the physical properties, such as tear strength, wind resistance, fire resistance, softening point, and pliability, that shingles must meet immediately after manufacture and before installation.
|
|||
|
This CERT specifies requirements for asphalt shingles made from glass felt, coated with asphalt, and surfaced with mineral granules, ensuring durability and performance for roofing applications.
|
|||
|
This CERT specifies requirements for self-adhering polymer-modified bituminous sheet materials used as underlayment on roof eaves or valleys to prevent water leakage due to ice dams.
|
|||
|
This CERT specifies requirements for asphalt-saturated organic felt used as underlayment in steep slope roofing applications.
|
|||
| Warranty: Lifetime |
Good To Know - Brand Attributes
Enviro
This brand participates in programs that upcycle, repurpose, or utilize deadstock materials to create new products.
This brand participates in carbon offset programs to neutralize its carbon emissions.
This brand supports initiatives to protect water resources and reduce water consumption.
This brand offers recycling services for its purchased products or for products within the same industry.
Outline for reaching near or at carbon zero emissions by 2030
51
PABCO Paramount Advantage
Paramount Advantage is specified by many homeowners associations due to its bold appearance and proven track record. Check here details!Scored Product Attributes
51
|
|
|
Certifications |
|---|---|---|---|
|
This CERT outlines requirements for Class A asphalt shingles with mineral granules, covering Type I (self-sealing) and Type II (non-self-sealing). It ensures fire resistance, heat behavior, and wind resistance (Type I), confirming their suitability for high-performance, safe roofing.
|
|||
|
This CERT specifies a test method for evaluating the wind resistance of steep slope roofing products, such as asphalt shingles, using a fan-induced procedure. It assesses the product's ability to withstand wind uplift forces, ensuring durability and performance under various wind conditions.
|
|||
|
This CERT specifies the requirements for asphalt roofing shingles made from glass felt and surfaced with mineral granules. It outlines the physical properties, such as tear strength, wind resistance, fire resistance, softening point, and pliability, that shingles must meet immediately after manufacture and before installation.
|
|||
|
This CERT specifies a test method for evaluating the wind resistance of sealed asphalt shingles by calculating the uplift forces exerted by wind and comparing them to the shingles' mechanical uplift resistance. It classifies shingles into three categories—Class D, Class G, and Class H—corresponding to their resistance to basic wind speeds of 115 mph, 150 mph, and 190 mph, respectively.
|
|||
|
ASTM E108 is a Standard Test Method that evaluates the fire resistance of roof coverings when exposed to simulated external fire sources. It assesses the material's ability to resist fire spread, penetration, and the generation of burning embers under controlled conditions.
|
|||
|
This CERT outlines fire test methods for roof coverings, evaluating their resistance to fire spread and penetration on combustible and non-combustible decks, ensuring fire performance and safety.
|
|||
|
This CERT specifies requirements for asphalt shingles made from glass felt, coated with asphalt, and surfaced with mineral granules, ensuring durability and performance for roofing applications.
|
|||
|
This CERT evaluates the fire resistance of roofing materials, classifying them into three categories—Class A, B, or C—based on their performance against external fire exposures, thereby aiding in the selection of appropriate roofing systems for varying fire risk scenarios.
|
|||
| Warranty: Limited Lifetime |
Good To Know - Brand Attributes
Governance
- Brand must describe itself in some way or form as family owned. Do not assume
51
PABCO Cascade
Featuring our exclusive U.S. patented design, Cascade shingles have a style that honors your homes heritage. Call us for roofing Services!Scored Product Attributes
51
|
|
|
Certifications |
|---|---|---|---|
|
This CERT outlines requirements for Class A asphalt shingles with mineral granules, covering Type I (self-sealing) and Type II (non-self-sealing). It ensures fire resistance, heat behavior, and wind resistance (Type I), confirming their suitability for high-performance, safe roofing.
|
|||
|
This CERT specifies a test method for evaluating the wind resistance of steep slope roofing products, such as asphalt shingles, using a fan-induced procedure. It assesses the product's ability to withstand wind uplift forces, ensuring durability and performance under various wind conditions.
|
|||
|
This CERT specifies the requirements for asphalt roofing shingles made from glass felt and surfaced with mineral granules. It outlines the physical properties, such as tear strength, wind resistance, fire resistance, softening point, and pliability, that shingles must meet immediately after manufacture and before installation.
|
|||
|
This CERT specifies a test method for evaluating the wind resistance of sealed asphalt shingles by calculating the uplift forces exerted by wind and comparing them to the shingles' mechanical uplift resistance. It classifies shingles into three categories—Class D, Class G, and Class H—corresponding to their resistance to basic wind speeds of 115 mph, 150 mph, and 190 mph, respectively.
|
|||
|
ASTM E108 is a Standard Test Method that evaluates the fire resistance of roof coverings when exposed to simulated external fire sources. It assesses the material's ability to resist fire spread, penetration, and the generation of burning embers under controlled conditions.
|
|||
|
This CERT outlines fire test methods for roof coverings, evaluating their resistance to fire spread and penetration on combustible and non-combustible decks, ensuring fire performance and safety.
|
|||
|
This CERT specifies requirements for asphalt shingles made from glass felt, coated with asphalt, and surfaced with mineral granules, ensuring durability and performance for roofing applications.
|
|||
|
This CERT evaluates the fire resistance of roofing materials, classifying them into three categories—Class A, B, or C—based on their performance against external fire exposures, thereby aiding in the selection of appropriate roofing systems for varying fire risk scenarios.
|
|||
| Warranty: Limited Lifetime |
Good To Know - Brand Attributes
Governance
- Brand must describe itself in some way or form as family owned. Do not assume
51
PABCO Premier Radiance
Premier Radiance solar reflective shingles are perfect for those hotter climates where air conditioning use is high. Call us for details!Scored Product Attributes
51
|
|
|
Certifications |
|---|---|---|---|
|
This CERT outlines requirements for Class A asphalt shingles with mineral granules, covering Type I (self-sealing) and Type II (non-self-sealing). It ensures fire resistance, heat behavior, and wind resistance (Type I), confirming their suitability for high-performance, safe roofing.
|
|||
|
This CERT specifies a test method for evaluating the wind resistance of steep slope roofing products, such as asphalt shingles, using a fan-induced procedure. It assesses the product's ability to withstand wind uplift forces, ensuring durability and performance under various wind conditions.
|
|||
|
This CERT specifies the requirements for asphalt roofing shingles made from glass felt and surfaced with mineral granules. It outlines the physical properties, such as tear strength, wind resistance, fire resistance, softening point, and pliability, that shingles must meet immediately after manufacture and before installation.
|
|||
|
This CERT specifies a test method for evaluating the wind resistance of sealed asphalt shingles by calculating the uplift forces exerted by wind and comparing them to the shingles' mechanical uplift resistance. It classifies shingles into three categories—Class D, Class G, and Class H—corresponding to their resistance to basic wind speeds of 115 mph, 150 mph, and 190 mph, respectively.
|
|||
|
ASTM E108 is a Standard Test Method that evaluates the fire resistance of roof coverings when exposed to simulated external fire sources. It assesses the material's ability to resist fire spread, penetration, and the generation of burning embers under controlled conditions.
|
|||
|
This CERT outlines fire test methods for roof coverings, evaluating their resistance to fire spread and penetration on combustible and non-combustible decks, ensuring fire performance and safety.
|
|||
|
This CERT specifies requirements for asphalt shingles made from glass felt, coated with asphalt, and surfaced with mineral granules, ensuring durability and performance for roofing applications.
|
|||
|
This CERT evaluates the fire resistance of roofing materials, classifying them into three categories—Class A, B, or C—based on their performance against external fire exposures, thereby aiding in the selection of appropriate roofing systems for varying fire risk scenarios.
|
|||
| Warranty: Limited Lifetime |
Good To Know - Brand Attributes
Governance
- Brand must describe itself in some way or form as family owned. Do not assume
49
Sika SikaEmaco 440
$53.74
Shop now launch
View description
Scored Product Attributes
49
|
|
|
Certifications |
|---|---|---|---|
|
|
|||
|
This CERT specifies a test method for determining the compressive strength of hydraulic cement mortars using 2-inch (50 mm) cube specimens. It provides a standardized procedure to assess the strength development of cementitious materials, ensuring consistency and reliability in quality control and specification compliance.
|
|||
|
This CERT specifies a rapid test method for detecting the potential alkali-silica reactivity of aggregates in mortar bars within 16 days. It evaluates the likelihood of deleterious internal expansion due to alkali-silica reactions, aiding in the selection of appropriate materials for concrete construction.
|
|||
|
This CERT specifies laboratory procedures to assess the durability of concrete specimens under rapid freezing and thawing cycles, evaluating their resistance to such conditions.
|
|||
|
This CERT specifies a standardized test method for determining the density (unit weight), yield, and air content (gravimetric) of freshly mixed concrete, ensuring quality control in construction applications.
|
|||
|
This CERT specifies a standardized test method for determining the length change of hardened hydraulic-cement mortar and concrete specimens due to factors other than externally applied forces and temperature variations, ensuring quality control in construction materials.
|
|||
|
This CERT outlines the procedure for determining the compressive strength of cylindrical concrete specimens, such as molded cylinders and drilled cores, ensuring concrete quality and structural integrity.
|
|||
|
This CERT specifies the procedure for determining the splitting tensile strength of cylindrical concrete specimens, such as molded cylinders and drilled cores, to assess concrete's resistance to tensile stresses.
|
|||
|
This CERT specifies the procedure for determining the bond strength of epoxy-resin-based bonding systems used with portland-cement concrete, assessing the effectiveness of these systems in adhering hardened concrete to either hardened or freshly mixed concrete.
|
|||
|
This CERT specifies the test method for determining the flexural strength of hydraulic cement mortars, ensuring performance consistency and reliability for construction applications.
|
44
Lea Ceramiche Stone effect tiles Cliffstone - Lea Ceramiche
Discover the Cliffstone collection, the interpretation of a rocky stone that does not exist in nature but has been reinvented creatively by Lea Ceramiche.Scored Product Attributes
44
|
|
|
Materials |
|---|---|---|---|
Recycled Materials |
|
|
|
Certifications |
|---|---|---|---|
|
This CERT verifies that products meet high standards for low chemical emissions, making them suitable for sensitive environments like schools and healthcare facilities by minimizing exposure to pollutants and volatile organic compounds (VOCs).
|
|||
|
This CERT marks conformity with European Union (EU) health, safety, and environmental protection standards. The CE (Conformité Européenne) Marking is required for many products to be sold within the European Economic Area (EEA), ensuring they meet EU regulatory requirements.
|
|||
|
|
|||
|
This CERT provides third-party verification of Environmental Product Declarations (EPDs) for construction products, aligning with ISO 14025 and EN 15804 standards. BRE Global Verified EPD assesses the environmental impact of products over their lifecycle, helping architects, builders, and regulators make sustainable choices in building materials.
|
|||
| Warranty: 1 year |
Good To Know - Brand Attributes
Origins
Made in Italy
88
Alside ASCEND Composite Cladding
ASCEND Composite Siding is a first-of-its-kind solution that combines beauty, performance and easy installation for the best overall value on the market.Scored Product Attributes
88
|
|
|
Certifications |
|---|---|---|---|
|
This CERT provides test methods for evaluating the fire-resistance of building materials and assemblies, assessing their ability to contain fire and withstand high temperatures. ASTM E119 is critical for ensuring the safety of structural components in buildings, particularly in fire-rated construction.
|
|||
|
This CERT outlines a standard test method for assessing the surface burning characteristics of building materials. ASTM E84, also known as the "Steiner Tunnel Test," measures flame spread and smoke development, essential for determining the fire safety of materials used in construction
|
|||
|
This CERT specifies a standardized method for evaluating the windload resistance of rigid plastic siding, ensuring product quality and performance in building exteriors.
|
|||
|
This CERT specifies the standard test method for determining the ignition temperature of plastics using a hot-air furnace.
|
|||
|
This CERT evaluates the resistance of wood and wood-based products to subterranean termites using laboratory tests. It is essential for determining the durability and suitability of these materials for use in termite-prone environments, ensuring structural integrity and longevity.
|
|||
|
This CERT specifies a test method for evaluating the flammability of plastics by measuring the rate, extent, and time of burning of materials positioned horizontally.
|
|||
|
This CERT specifies a test method for assessing the fire penetration resistance of exterior wall assemblies when exposed to direct flame impingement, simulating conditions encountered in wildland-urban interface fires.
|
|||
|
This CERT establishes a test method for determining the ignitability of exterior wall assemblies when exposed to radiant heat, ensuring materials used in building exteriors meet fire safety standards.
|
|||
| Warranty: Limited Lifetime |
43
Marca Corona Arkiquartz
Quartzite effect porcelain stoneware available in seven color variants: arctic, pearl, pumice, titanium, graphite, leaf, block. Discover Arkiquartz.Scored Product Attributes
43
|
|
|
Certifications |
|---|---|---|---|
|
This CERT verifies that products meet high standards for low chemical emissions, making them suitable for sensitive environments like schools and healthcare facilities by minimizing exposure to pollutants and volatile organic compounds (VOCs).
|
|||
|
|
|||
|
This CERT provides third-party verification of Environmental Product Declarations (EPDs) for construction products, aligning with ISO 14025 and EN 15804 standards. BRE Global Verified EPD assesses the environmental impact of products over their lifecycle, helping architects, builders, and regulators make sustainable choices in building materials.
|
|||
|
The Declare Label, developed by the International Living Future Institute (ILFI), serves as a transparency platform and product database aimed at promoting healthy building materials. It provides detailed information about a product's composition, origin, and end-of-life options.
|
|||
|
This CERT establishes comprehensive methodologies for assessing the slip resistance of surfaces intended for pedestrian use.
|
|||
|
This CERT is a performance-based system for measuring, certifying, and monitoring features of the built environment that impact human health and well-being, encompassing aspects such as air, water, nourishment, light, fitness, comfort, and mind.
|
|||
| Warranty: 1 year |
Good To Know - Brand Attributes
Origins
Made in Italy
43
Marca Corona Arkistone
Italian flooring textures and elegant floor tiles in porcelain stoneware, with sophisticated veinings and a striking aesthetic. Discover Arkistone.Scored Product Attributes
43
|
|
|
Certifications |
|---|---|---|---|
|
This CERT verifies that products meet high standards for low chemical emissions, making them suitable for sensitive environments like schools and healthcare facilities by minimizing exposure to pollutants and volatile organic compounds (VOCs).
|
|||
|
|
|||
|
This CERT provides third-party verification of Environmental Product Declarations (EPDs) for construction products, aligning with ISO 14025 and EN 15804 standards. BRE Global Verified EPD assesses the environmental impact of products over their lifecycle, helping architects, builders, and regulators make sustainable choices in building materials.
|
|||
|
The Declare Label, developed by the International Living Future Institute (ILFI), serves as a transparency platform and product database aimed at promoting healthy building materials. It provides detailed information about a product's composition, origin, and end-of-life options.
|
|||
|
This CERT establishes comprehensive methodologies for assessing the slip resistance of surfaces intended for pedestrian use.
|
|||
|
This CERT is a performance-based system for measuring, certifying, and monitoring features of the built environment that impact human health and well-being, encompassing aspects such as air, water, nourishment, light, fitness, comfort, and mind.
|
|||
| Warranty: 1 year |
Good To Know - Brand Attributes
Origins
Made in Italy
47
Sika SikaQuick FNP
$41.00
Shop now launch
View description
Scored Product Attributes
47
|
|
|
Certifications |
|---|---|---|---|
|
|
|||
|
This CERT specifies a test method for determining the compressive strength of hydraulic cement mortars using 2-inch (50 mm) cube specimens. It provides a standardized procedure to assess the strength development of cementitious materials, ensuring consistency and reliability in quality control and specification compliance.
|
|||
|
This CERT specifies laboratory procedures to assess the durability of concrete specimens under rapid freezing and thawing cycles, evaluating their resistance to such conditions.
|
|||
|
This CERT provides a standardized test method for assessing the electrical conductance of concrete to rapidly indicate its resistance to chloride ion penetration, which is crucial for evaluating durability against corrosion.
|
|||
|
This CERT provides a standardized test method for evaluating the tensile strength of concrete surfaces and the bond strength of repair or overlay materials by direct tension (pull-off method), ensuring quality and durability in construction applications.
|
|||
|
This CERT specifies the test method for determining the setting time of hydraulic-cement paste using Gillmore needles, ensuring cement's suitability for construction applications.
|
|||
|
This CERT outlines the test method for measuring concrete's flexural strength using a simple beam with center-point loading, ensuring its load-bearing capacity.
|
|||
|
This CERT specifies the procedure for determining the static modulus of elasticity (Young's modulus) and Poisson's ratio of concrete in compression, essential for assessing concrete's deformation characteristics under load.
|
|||
|
This CERT specifies the requirements for packaged, dry, rapid-hardening cementitious materials intended for repairing hardened hydraulic-cement concrete pavements and structures. It ensures that such materials meet specific performance criteria for effective and durable repairs.
|
|||
|
This CERT specifies the test method for evaluating the scaling resistance of concrete surfaces exposed to deicing chemicals, ensuring durability and performance under freeze-thaw cycles in harsh climates.
|
47
Atlas Roofing ProLam Shingles
Scored Product Attributes
47
|
|
|
Certifications |
|---|---|---|---|
|
This CERT outlines requirements for Class A asphalt shingles with mineral granules, covering Type I (self-sealing) and Type II (non-self-sealing). It ensures fire resistance, heat behavior, and wind resistance (Type I), confirming their suitability for high-performance, safe roofing.
|
|||
|
This CERT specifies a test method for evaluating the wind resistance of steep slope roofing products, such as asphalt shingles, using a fan-induced procedure. It assesses the product's ability to withstand wind uplift forces, ensuring durability and performance under various wind conditions.
|
|||
|
This CERT specifies the requirements for asphalt roofing shingles made from glass felt and surfaced with mineral granules. It outlines the physical properties, such as tear strength, wind resistance, fire resistance, softening point, and pliability, that shingles must meet immediately after manufacture and before installation.
|
|||
|
This CERT specifies test methods for measuring the mechanical uplift resistance of asphalt roofing shingles that utilize factory-applied or field-applied sealants. It provides standardized procedures to assess a shingle's ability to withstand wind-induced forces, ensuring durability and performance in various environmental conditions.
|
|||
|
This CERT specifies a test method for evaluating the wind resistance of sealed asphalt shingles by calculating the uplift forces exerted by wind and comparing them to the shingles' mechanical uplift resistance. It classifies shingles into three categories—Class D, Class G, and Class H—corresponding to their resistance to basic wind speeds of 115 mph, 150 mph, and 190 mph, respectively.
|
|||
|
ASTM E108 is a Standard Test Method that evaluates the fire resistance of roof coverings when exposed to simulated external fire sources. It assesses the material's ability to resist fire spread, penetration, and the generation of burning embers under controlled conditions.
|
|||
|
This CERT evaluates the impact resistance of roofing materials, classifying them into four categories (Class 1 to Class 4) based on their ability to withstand simulated hail impacts, thereby aiding in the selection of durable roofing solutions.
|
|||
|
This CERT evaluates the fire resistance of roofing materials, classifying them into three categories—Class A, B, or C—based on their performance against external fire exposures, thereby aiding in the selection of appropriate roofing systems for varying fire risk scenarios.
|
|||
| Warranty: Limited Lifetime |
46
Atlas Roofing Briarwood Pro Shingles
Scored Product Attributes
46
|
|
|
Certifications |
|---|---|---|---|
|
This CERT outlines requirements for Class A asphalt shingles with mineral granules, covering Type I (self-sealing) and Type II (non-self-sealing). It ensures fire resistance, heat behavior, and wind resistance (Type I), confirming their suitability for high-performance, safe roofing.
|
|||
|
This CERT specifies a test method for evaluating the wind resistance of steep slope roofing products, such as asphalt shingles, using a fan-induced procedure. It assesses the product's ability to withstand wind uplift forces, ensuring durability and performance under various wind conditions.
|
|||
|
This CERT specifies the requirements for asphalt roofing shingles made from glass felt and surfaced with mineral granules. It outlines the physical properties, such as tear strength, wind resistance, fire resistance, softening point, and pliability, that shingles must meet immediately after manufacture and before installation.
|
|||
|
This CERT specifies test methods for measuring the mechanical uplift resistance of asphalt roofing shingles that utilize factory-applied or field-applied sealants. It provides standardized procedures to assess a shingle's ability to withstand wind-induced forces, ensuring durability and performance in various environmental conditions.
|
|||
|
This CERT specifies a test method for evaluating the wind resistance of sealed asphalt shingles by calculating the uplift forces exerted by wind and comparing them to the shingles' mechanical uplift resistance. It classifies shingles into three categories—Class D, Class G, and Class H—corresponding to their resistance to basic wind speeds of 115 mph, 150 mph, and 190 mph, respectively.
|
|||
|
ASTM E108 is a Standard Test Method that evaluates the fire resistance of roof coverings when exposed to simulated external fire sources. It assesses the material's ability to resist fire spread, penetration, and the generation of burning embers under controlled conditions.
|
|||
|
This CERT evaluates the fire resistance of roofing materials, classifying them into three categories—Class A, B, or C—based on their performance against external fire exposures, thereby aiding in the selection of appropriate roofing systems for varying fire risk scenarios.
|
|||
| Warranty: Limited Lifetime |
61
LITOKOL Starlike ColorCrystal EVO
$74.95
Shop now launch
View description
Scored Product Attributes
61
|
|
|
Materials |
|---|---|---|---|
Recycled Content |
|
|
|
Certifications |
|---|---|---|---|
|
This CERT provides third-party-verified environmental data on products, based on lifecycle assessment (LCA) in compliance with ISO standards. UL Environmental Product Declaration (EPD) promotes transparency in environmental impact, supporting informed decisions in sustainable design and construction by detailing a product’s environmental footprint.
|
|||
|
This CERT specifies the test method to determine the abrasion resistance of ceramic tile grouts, ensuring their durability and suitability for both internal and external wall and floor installations.
|
|||
|
This CERT specifies the test method to determine the flexural and compressive strength of ceramic tile grouts, ensuring their mechanical performance for both internal and external wall and floor installations.
|
|||
|
This CERT specifies the test method to determine the shrinkage of ceramic tile grouts, ensuring their dimensional stability for both internal and external wall and floor installations.
|
|||
|
This CERT specifies the test method to determine the water absorption coefficient due to capillary action in ceramic tile grouts, ensuring their suitability for internal and external wall and floor installations.
|
|||
|
This CERT specifies requirements and test methods for grouts used in ceramic tile installations, ensuring performance and durability.
|
99
FRONT Mop Sustainable Bricks - FRONT Materials
Mop Sustainable Bricks- made from at least 60% waste - for interior and exterior - compliant with industry standardsScored Product Attributes
99
|
|
|
Materials |
|---|---|---|---|
Upcycled Construction Waste |
|
|
|
Certifications |
|---|---|---|---|
|
This CERT recognizes businesses that meet high standards of social and environmental performance, accountability and transparency as certified by B Lab.
|
|||
|
This CERT marks conformity with European Union (EU) health, safety, and environmental protection standards. The CE (Conformité Européenne) Marking is required for many products to be sold within the European Economic Area (EEA), ensuring they meet EU regulatory requirements.
|
|||
|
This CERT specifies requirements for masonry units used in construction, covering various materials such as clay, calcium silicate, aggregate concrete, autoclaved aerated concrete, manufactured stone, and natural stone.
|
99
FRONT Blackpepper Sustainable Building Materials - FRONT Materials
Blackpepper Sustainable Building Materials - made from at least 60% waste - for interior and exterior - compliant with industry standardsScored Product Attributes
99
|
|
|
Materials |
|---|---|---|---|
Upcycled Construction Waste |
|
|
|
Certifications |
|---|---|---|---|
|
This CERT recognizes businesses that meet high standards of social and environmental performance, accountability and transparency as certified by B Lab.
|
|||
|
This CERT marks conformity with European Union (EU) health, safety, and environmental protection standards. The CE (Conformité Européenne) Marking is required for many products to be sold within the European Economic Area (EEA), ensuring they meet EU regulatory requirements.
|
|||
|
This CERT specifies requirements for masonry units used in construction, covering various materials such as clay, calcium silicate, aggregate concrete, autoclaved aerated concrete, manufactured stone, and natural stone.
|
81
Kaycan The Verona Collection - Lap Siding | Kaycan Vinyl Siding
Our VERONA COLLECTION, featuring our Helios™ Technology, combines the perfect choice of bright, vivid colours and a unique woodgrain, creating a breathtaking effect. This stunning, vibrant colour palette was carefully selected by our design team alongside architects; these bold colours will be trending throughout the year.Scored Product Attributes
81
|
|
|
Certifications |
|---|---|---|---|
|
This CERT outlines a standard test method for assessing the surface burning characteristics of building materials. ASTM E84, also known as the "Steiner Tunnel Test," measures flame spread and smoke development, essential for determining the fire safety of materials used in construction
|
|||
|
This CERT specifies a standardized method for evaluating the windload resistance of rigid plastic siding, ensuring product quality and performance in building exteriors.
|
|||
|
This CERT specifies the standard test method for determining the ignition temperature of plastics using a hot-air furnace.
|
|||
|
This CERT specifies a laboratory procedure for measuring the density of smoke produced by burning or decomposing plastics, aiding in assessing fire hazards associated with plastic materials.
|
|||
|
This CERT ensures that PVC siding products meet specific criteria for materials, dimensions, warp, shrinkage, impact strength, expansion, appearance, and wind load resistance.
|
|||
|
This CERT specifies test methods for determining the impact resistance of rigid poly(vinyl chloride) (PVC) building products, assessing their durability and suitability for construction applications.
|
|||
|
This CERT specifies a test method for evaluating the flammability of plastics by measuring the rate, extent, and time of burning of materials positioned horizontally.
|
|||
| Warranty: Limited Lifetime |
Good To Know - Brand Attributes
Origins
Designed in Canada
Made in Canada
81
Kaycan Timberlake Collection Kaycan
With its broad colour options and many profiles, our Timberlake collection offers countless options to fit any design. Timberlake offers a subtle, yet realistic wood grain texture of carefully painted wood and the easy maintenance of vinyl to deliver a beautiful, long lasting home exterior.Scored Product Attributes
81
|
|
|
Certifications |
|---|---|---|---|
|
This CERT outlines a standard test method for assessing the surface burning characteristics of building materials. ASTM E84, also known as the "Steiner Tunnel Test," measures flame spread and smoke development, essential for determining the fire safety of materials used in construction
|
|||
|
This CERT specifies a standardized method for evaluating the windload resistance of rigid plastic siding, ensuring product quality and performance in building exteriors.
|
|||
|
This CERT specifies the standard test method for determining the ignition temperature of plastics using a hot-air furnace.
|
|||
|
This CERT specifies a laboratory procedure for measuring the density of smoke produced by burning or decomposing plastics, aiding in assessing fire hazards associated with plastic materials.
|
|||
|
This CERT ensures that PVC siding products meet specific criteria for materials, dimensions, warp, shrinkage, impact strength, expansion, appearance, and wind load resistance.
|
|||
|
This CERT specifies test methods for determining the impact resistance of rigid poly(vinyl chloride) (PVC) building products, assessing their durability and suitability for construction applications.
|
|||
|
This CERT specifies a test method for evaluating the flammability of plastics by measuring the rate, extent, and time of burning of materials positioned horizontally.
|
|||
| Warranty: Limited Lifetime |
Good To Know - Brand Attributes
Origins
Designed in Canada
Made in Canada
81
Kaycan Richmond | Bevel Lap Vinyl Siding
Scored Product Attributes
81
|
|
|
Certifications |
|---|---|---|---|
|
This CERT outlines a standard test method for assessing the surface burning characteristics of building materials. ASTM E84, also known as the "Steiner Tunnel Test," measures flame spread and smoke development, essential for determining the fire safety of materials used in construction
|
|||
|
This CERT specifies a standardized method for evaluating the windload resistance of rigid plastic siding, ensuring product quality and performance in building exteriors.
|
|||
|
This CERT specifies the standard test method for determining the ignition temperature of plastics using a hot-air furnace.
|
|||
|
This CERT specifies a laboratory procedure for measuring the density of smoke produced by burning or decomposing plastics, aiding in assessing fire hazards associated with plastic materials.
|
|||
|
This CERT ensures that PVC siding products meet specific criteria for materials, dimensions, warp, shrinkage, impact strength, expansion, appearance, and wind load resistance.
|
|||
|
This CERT specifies test methods for determining the impact resistance of rigid poly(vinyl chloride) (PVC) building products, assessing their durability and suitability for construction applications.
|
|||
|
This CERT specifies a test method for evaluating the flammability of plastics by measuring the rate, extent, and time of burning of materials positioned horizontally.
|
|||
| Warranty: Limited Lifetime |
Good To Know - Brand Attributes
Origins
Designed in Canada
Made in Canada
90
Andersen Windows 400 Series gliding window
Made of wood protected by a vinyl exterior, it's our best-selling gliding window.Scored Product Attributes
90
|
|
|
Certifications |
|---|---|---|---|
|
This CERT verifies that products meet energy efficiency standards set by the U.S. Environmental Protection Agency (EPA), reducing energy consumption and environmental impact.
|
|||
|
This CERT sets performance standards for windows, doors, and skylights, focusing on air, water, and structural performance. It ensures durability and reliability in residential and commercial applications, meeting North American building codes and consumer expectations.
|
|||
|
This CERT establishes performance standards for windows, doors, and skylights, focusing on air, water, structural integrity, and energy efficiency. It ensures compliance with evolving building codes and promotes high-quality fenestration in residential and commercial applications.
|
|||
|
This CERT establishes standardized energy performance ratings for fenestration products, including windows, doors, and skylights, to assist consumers and professionals in making informed decisions regarding energy efficiency.
|
|||
|
This CERT signifies that windows, doors, and skylights have been manufactured and tested in accordance with stringent performance standards, ensuring their quality, durability, and compliance with building codes.
|
|||
| Warranty: Over 1 - 2 Year |
90
Andersen Windows 400 Series casement window
Our top casement window offers a timeless mix of engineering and craftsmanship with customizable options and accessories.Scored Product Attributes
90
|
|
|
Certifications |
|---|---|---|---|
|
This CERT verifies that products meet energy efficiency standards set by the U.S. Environmental Protection Agency (EPA), reducing energy consumption and environmental impact.
|
|||
|
This CERT sets performance standards for windows, doors, and skylights, focusing on air, water, and structural performance. It ensures durability and reliability in residential and commercial applications, meeting North American building codes and consumer expectations.
|
|||
|
This CERT establishes performance standards for windows, doors, and skylights, focusing on air, water, structural integrity, and energy efficiency. It ensures compliance with evolving building codes and promotes high-quality fenestration in residential and commercial applications.
|
|||
|
This CERT establishes standardized energy performance ratings for fenestration products, including windows, doors, and skylights, to assist consumers and professionals in making informed decisions regarding energy efficiency.
|
|||
|
This CERT signifies that windows, doors, and skylights have been manufactured and tested in accordance with stringent performance standards, ensuring their quality, durability, and compliance with building codes.
|
|||
| Warranty: Over 1 - 2 Year |
90
Andersen Windows 100 Series single-hung window
100 Series single-hung windows allow ventilation through a single operable lower sash that slides up and down.Scored Product Attributes
90
|
|
|
Certifications |
|---|---|---|---|
|
This CERT verifies that products meet energy efficiency standards set by the U.S. Environmental Protection Agency (EPA), reducing energy consumption and environmental impact.
|
|||
|
This CERT sets performance standards for windows, doors, and skylights, focusing on air, water, and structural performance. It ensures durability and reliability in residential and commercial applications, meeting North American building codes and consumer expectations.
|
|||
|
This CERT establishes performance standards for windows, doors, and skylights, focusing on air, water, structural integrity, and energy efficiency. It ensures compliance with evolving building codes and promotes high-quality fenestration in residential and commercial applications.
|
|||
|
This CERT establishes standardized energy performance ratings for fenestration products, including windows, doors, and skylights, to assist consumers and professionals in making informed decisions regarding energy efficiency.
|
|||
|
This CERT signifies that windows, doors, and skylights have been manufactured and tested in accordance with stringent performance standards, ensuring their quality, durability, and compliance with building codes.
|
|||
| Warranty: Over 1 - 2 Year |
90
Andersen Windows 400 Series bay and bow windows
400 Series bay and bow windows feature all of the individual qualities of our Woodwright, double-hung and casement windows.Scored Product Attributes
90
|
|
|
Certifications |
|---|---|---|---|
|
This CERT verifies that products meet energy efficiency standards set by the U.S. Environmental Protection Agency (EPA), reducing energy consumption and environmental impact.
|
|||
|
This CERT sets performance standards for windows, doors, and skylights, focusing on air, water, and structural performance. It ensures durability and reliability in residential and commercial applications, meeting North American building codes and consumer expectations.
|
|||
|
This CERT establishes performance standards for windows, doors, and skylights, focusing on air, water, structural integrity, and energy efficiency. It ensures compliance with evolving building codes and promotes high-quality fenestration in residential and commercial applications.
|
|||
|
This CERT establishes standardized energy performance ratings for fenestration products, including windows, doors, and skylights, to assist consumers and professionals in making informed decisions regarding energy efficiency.
|
|||
|
This CERT signifies that windows, doors, and skylights have been manufactured and tested in accordance with stringent performance standards, ensuring their quality, durability, and compliance with building codes.
|
|||
| Warranty: Over 1 - 2 Year |
67
Johnson Hardwood Johnson Hardwood's Bella Vista Series - Color, Monza - Construction, High Performance Laminate
Bella Vista Series - Color: Monza - Construction: High Performance Flooring. Johnson Hardwood's luxury High Performance Flooring, is an ultra durable AC5 rated laminate. This is the latest development in the flooring technology, hyper realistic and 100% waterproof.Scored Product Attributes
67
|
|
|
Certifications |
|---|---|---|---|
|
This CERT verifies that products meet high standards for low chemical emissions, making them suitable for sensitive environments like schools and healthcare facilities by minimizing exposure to pollutants and volatile organic compounds (VOCs).
|
|||
|
This CERT provides a test method for determining the airborne sound transmission loss of building partitions and elements. ASTM E90 is essential for evaluating the soundproofing effectiveness of walls, floors, and ceilings, supporting noise control in residential, commercial, and industrial spaces.
|
|||
|
This CERT verifies that hard surface flooring materials, adhesives, and underlayments meet stringent indoor air quality (IAQ) standards by limiting emissions of volatile organic compounds (VOCs), thereby contributing to healthier indoor environments.
|
|||
| Warranty: Limited Lifetime |
66
Havwoods Alzon Rustic Herringbone
Scored Product Attributes
66
|
|
|
Certifications |
|---|---|---|---|
|
This CERT verifies that wood products meet the formaldehyde emission standards set by the U.S. Environmental Protection Agency (EPA) under TSCA Title VI, ensuring safer indoor air quality.
|
|||
|
This CERT verifies that products are made from a mix of materials including FSC-certified wood, recycled content and controlled wood from responsible sources according to the standards of the Forest Stewardship Council (FSC).
|
|||
|
This CERT measures the critical radiant flux of floor coverings under radiant heat, assessing flame spread in corridors or exitways during simulated fire conditions for fire safety evaluations.
|
|||
|
This CERT verifies that hard surface flooring materials, adhesives, and underlayments meet stringent indoor air quality (IAQ) standards by limiting emissions of volatile organic compounds (VOCs), thereby contributing to healthier indoor environments.
|
|||
| Warranty: 20 - 34 Day |
Good To Know - Brand Attributes
Social
This brand publishes a Modern Slavery Statement, demonstrating its commitment to preventing forced labor and human trafficking in its supply chain.
Origins
Made in Europe
42
Davinci Roofscapes Composite Multi-Width Shake Roof | DaVinci Roofscapes
DaVinci composite multi-width shake tiles are available in authentic cedar colors. Learn about custom product here.Scored Product Attributes
42
|
|
|
Certifications |
|---|---|---|---|
|
This CERT is issued by the Canadian Construction Materials Centre (CCMC) to verify that construction materials and systems meet Canada's National Building Code requirements. CCMC Certification assesses various performance criteria, including durability, safety, and compliance, providing regulatory acceptance for building products used in Canada.
|
|||
|
This CERT specifies a test method for evaluating the wind resistance of steep slope roofing products, such as asphalt shingles, using a fan-induced procedure. It assesses the product's ability to withstand wind uplift forces, ensuring durability and performance under various wind conditions.
|
|||
|
ASTM E108 is a Standard Test Method that evaluates the fire resistance of roof coverings when exposed to simulated external fire sources. It assesses the material's ability to resist fire spread, penetration, and the generation of burning embers under controlled conditions.
|
|||
|
This CERT signifies that building and plumbing products have been evaluated and verified for compliance with applicable codes and standards, providing assurance of their quality and safety.
|
|||
|
This CERT evaluates the impact resistance of roofing materials, classifying them into four categories (Class 1 to Class 4) based on their ability to withstand simulated hail impacts, thereby aiding in the selection of durable roofing solutions.
|
|||
|
This CERT ensures compliance with California's Title 24, Part 6, Joint Appendix 13 (JA13), which establishes performance and testing standards for heat pump water heaters (HPWHs). It applies to water heaters aiming to meet energy efficiency and demand response requirements.
|
|||
|
This CERT indicates that a product complies with the Wildland Urban Interface (WUI) fire safety standards, specifically the WUI 4175 certification, ensuring enhanced fire resistance for building materials used in areas prone to wildfires.
|
|||
| Warranty: Lifetime |
Good To Know - Brand Attributes
Origins
Made in United States of America
42
Davinci Roofscapes Composite Single-Width Shake Roof | DaVinci Roofscapes
Each DaVinci composite single width shake is formulated from different wood tones creating a natural variance in color, enhancing the realistic appearance.Scored Product Attributes
42
|
|
|
Certifications |
|---|---|---|---|
|
This CERT is issued by the Canadian Construction Materials Centre (CCMC) to verify that construction materials and systems meet Canada's National Building Code requirements. CCMC Certification assesses various performance criteria, including durability, safety, and compliance, providing regulatory acceptance for building products used in Canada.
|
|||
|
This CERT specifies a test method for evaluating the wind resistance of steep slope roofing products, such as asphalt shingles, using a fan-induced procedure. It assesses the product's ability to withstand wind uplift forces, ensuring durability and performance under various wind conditions.
|
|||
|
ASTM E108 is a Standard Test Method that evaluates the fire resistance of roof coverings when exposed to simulated external fire sources. It assesses the material's ability to resist fire spread, penetration, and the generation of burning embers under controlled conditions.
|
|||
|
This CERT signifies that building and plumbing products have been evaluated and verified for compliance with applicable codes and standards, providing assurance of their quality and safety.
|
|||
|
This CERT evaluates the impact resistance of roofing materials, classifying them into four categories (Class 1 to Class 4) based on their ability to withstand simulated hail impacts, thereby aiding in the selection of durable roofing solutions.
|
|||
|
This CERT ensures compliance with California's Title 24, Part 6, Joint Appendix 13 (JA13), which establishes performance and testing standards for heat pump water heaters (HPWHs). It applies to water heaters aiming to meet energy efficiency and demand response requirements.
|
|||
|
This CERT indicates that a product complies with the Wildland Urban Interface (WUI) fire safety standards, specifically the WUI 4175 certification, ensuring enhanced fire resistance for building materials used in areas prone to wildfires.
|
|||
| Warranty: Lifetime |
Good To Know - Brand Attributes
Origins
Made in United States of America
42
Davinci Roofscapes Composite Select Shake Roofing | DaVinci Roofscapes
Composite select shake tiles offer the beauty of real cedar shake and the lasting elegance of a DaVinci product. Bring your aesthetic vision to life.Scored Product Attributes
42
|
|
|
Certifications |
|---|---|---|---|
|
This CERT is issued by the Canadian Construction Materials Centre (CCMC) to verify that construction materials and systems meet Canada's National Building Code requirements. CCMC Certification assesses various performance criteria, including durability, safety, and compliance, providing regulatory acceptance for building products used in Canada.
|
|||
|
This CERT specifies a test method for evaluating the wind resistance of steep slope roofing products, such as asphalt shingles, using a fan-induced procedure. It assesses the product's ability to withstand wind uplift forces, ensuring durability and performance under various wind conditions.
|
|||
|
ASTM E108 is a Standard Test Method that evaluates the fire resistance of roof coverings when exposed to simulated external fire sources. It assesses the material's ability to resist fire spread, penetration, and the generation of burning embers under controlled conditions.
|
|||
|
This CERT signifies that building and plumbing products have been evaluated and verified for compliance with applicable codes and standards, providing assurance of their quality and safety.
|
|||
|
This CERT evaluates the impact resistance of roofing materials, classifying them into four categories (Class 1 to Class 4) based on their ability to withstand simulated hail impacts, thereby aiding in the selection of durable roofing solutions.
|
|||
|
This CERT ensures compliance with California's Title 24, Part 6, Joint Appendix 13 (JA13), which establishes performance and testing standards for heat pump water heaters (HPWHs). It applies to water heaters aiming to meet energy efficiency and demand response requirements.
|
|||
|
This CERT indicates that a product complies with the Wildland Urban Interface (WUI) fire safety standards, specifically the WUI 4175 certification, ensuring enhanced fire resistance for building materials used in areas prone to wildfires.
|
|||
| Warranty: Lifetime |
Good To Know - Brand Attributes
Origins
Made in United States of America
26
TileBar Moxy XL Ash Gray Rigid Core Click Rigid Core Click 9x72 Luxury Vinyl Plank Flooring
$82.53
Shop now launch
View description
Scored Product Attributes
26
|
|
|
Materials |
|---|---|---|---|
Phthalates free |
|
|
|
Certifications |
|---|---|---|---|
|
This CERT evaluates the heat stability of resilient flooring by measuring color changes after exposure to high temperatures, ensuring the material maintains appearance and performance under heat.
|
|||
|
This CERT measures the light stability of resilient flooring by assessing color changes after light exposure, ensuring the material maintains appearance and performance over time.
|
|||
|
This CERT evaluates the chemical resistance of resilient flooring materials, ensuring durability and aesthetic retention when exposed to chemical reagents in residential and commercial settings.
|
|||
|
This CERT verifies that hard surface flooring materials, adhesives, and underlayments meet stringent indoor air quality (IAQ) standards by limiting emissions of volatile organic compounds (VOCs), thereby contributing to healthier indoor environments.
|
|||
|
This CERT specifies the test method for evaluating the durability of security glazing materials when subjected to physical attack, ensuring resistance to forced entry and vandalism in security-sensitive applications.
|
|||
|
This CERT specifies the requirements for resilient flooring with a rigid polymeric core, ensuring durability, dimensional stability, and performance in commercial and residential applications. It covers material composition, physical properties, and wear resistance.
|
|||
| Warranty: Over 7 - 10 Year |
Good To Know - Brand Attributes
Enviro
This brand participates in programs that upcycle, repurpose, or utilize deadstock materials to create new products.
Origins
Made in Vietnam