This CERT specifies minimum construction requirements for masonry structures, including materials, placement, bonding, anchoring, and reinforcement.

This CERT specifies requirements for portland cement, ensuring quality and performance in construction applications.

This CERT specifies the production, properties, packaging, and testing of packaged, dry, combined materials for concrete and high-strength mortar, ensuring consistent quality for construction applications.

This CERT specifies the requirements for pigments used in integrally colored concrete, ensuring uniformity, color stability, and compatibility with concrete mixtures for aesthetic and durable construction applications.

This CERT specifies requirements for blended hydraulic cements, combining materials like slag, pozzolan, or limestone with portland cement to enhance performance in various construction applications.

This CERT specifies performance requirements for hydraulic cement used in construction, focusing on durability, strength, and sustainability attributes, without prescribing specific composition, allowing flexibility in raw materials.

This CERT specifies the requirements for masonry cement used in the preparation of mortar, focusing on properties like strength, setting time, and workability to ensure quality and consistency in masonry construction.

This CERT specifies the procedures for testing the compressive strength of masonry prisms, ensuring structural reliability and consistency in masonry construction.

This CERT specifies performance requirements for admixtures for use in masonry mortar, focusing on properties like workability, bond strength, and durability to ensure the consistency and performance of mortar in masonry applications.

This CERT provides a guide for evaluating the standard specifications for hydraulic cements, offering a framework to understand and interpret cement specifications for consistent application in construction.

This CERT specifies the requirements for preblended dry mortar mixes for masonry, ensuring consistency, quality, and performance in masonry construction by regulating properties such as workability, strength, and durability.

This CERT specifies the requirements for hydrated lime used in masonry mortars, focusing on its chemical composition, plasticity, and durability to ensure workability and long-term performance in masonry construction.

This CERT specifies the requirements for mortar for unit masonry, focusing on its physical properties, such as compressive strength, water retention, and workability, ensuring durability and consistency in masonry construction.

This CERT specifies the test methods for evaluating fresh masonry mortars' properties, including consistency, air content, water retention, and compressive strength, ensuring quality and performance in masonry construction.

This CERT specifies minimum construction requirements for masonry structures, including materials, placement, bonding, anchoring, and reinforcement.

This CERT specifies the production, properties, packaging, and testing of packaged, dry, combined materials for concrete and high-strength mortar, ensuring consistent quality for construction applications.

This CERT specifies requirements for blended hydraulic cements, combining materials like slag, pozzolan, or limestone with portland cement to enhance performance in various construction applications.

This CERT specifies performance requirements for hydraulic cement used in construction, focusing on durability, strength, and sustainability attributes, without prescribing specific composition, allowing flexibility in raw materials.

This CERT specifies the procedures for testing the compressive strength of masonry prisms, ensuring structural reliability and consistency in masonry construction.

This CERT specifies the requirements for mortar cement used in masonry construction, focusing on performance attributes such as strength, workability, and durability for reliable and consistent masonry applications.

This CERT specifies performance requirements for admixtures for use in masonry mortar, focusing on properties like workability, bond strength, and durability to ensure the consistency and performance of mortar in masonry applications.

This CERT provides a guide for evaluating the standard specifications for hydraulic cements, offering a framework to understand and interpret cement specifications for consistent application in construction.

This CERT specifies the requirements for preblended dry mortar mixes for masonry, ensuring consistency, quality, and performance in masonry construction by regulating properties such as workability, strength, and durability.

This CERT specifies the requirements for mortar for unit masonry, focusing on its physical properties, such as compressive strength, water retention, and workability, ensuring durability and consistency in masonry construction.

This CERT specifies the test methods for evaluating fresh masonry mortars' properties, including consistency, air content, water retention, and compressive strength, ensuring quality and performance in masonry construction.

This CERT specifies the requirements for pigments used in integrally colored concrete, ensuring uniformity, color stability, and compatibility with concrete mixtures for aesthetic and durable construction applications.

This CERT specifies the procedures for testing the compressive strength of masonry prisms, ensuring structural reliability and consistency in masonry construction.

This CERT specifies requirements for portland cement, ensuring quality and performance in construction applications.

This CERT specifies the production, properties, packaging, and testing of packaged, dry, combined materials for concrete and high-strength mortar, ensuring consistent quality for construction applications.

This CERT specifies requirements for blended hydraulic cements, combining materials like slag, pozzolan, or limestone with portland cement to enhance performance in various construction applications.

This CERT specifies minimum construction requirements for masonry structures, including materials, placement, bonding, anchoring, and reinforcement.

This CERT specifies performance requirements for hydraulic cement used in construction, focusing on durability, strength, and sustainability attributes, without prescribing specific composition, allowing flexibility in raw materials.

This CERT specifies performance requirements for admixtures for use in masonry mortar, focusing on properties like workability, bond strength, and durability to ensure the consistency and performance of mortar in masonry applications.

This CERT provides a guide for evaluating the standard specifications for hydraulic cements, offering a framework to understand and interpret cement specifications for consistent application in construction.

This CERT specifies the requirements for hydrated lime used in masonry mortars, focusing on its chemical composition, plasticity, and durability to ensure workability and long-term performance in masonry construction.

This CERT specifies the requirements for mortar for unit masonry, focusing on its physical properties, such as compressive strength, water retention, and workability, ensuring durability and consistency in masonry construction.

This CERT specifies the requirements for pigments used in integrally colored concrete, ensuring uniformity, color stability, and compatibility with concrete mixtures for aesthetic and durable construction applications.

This CERT ensures that products in contact with drinking water meet health and safety standards under NSF/ANSI/CAN 61-2022. It addresses material safety, ensuring no harmful contaminants are leached into potable water, supporting public health protection in plumbing systems.

This CERT specifies a test method for determining the compressive strength of hydraulic cement mortars using 2-inch (50 mm) cube specimens. It provides a standardized procedure to assess the strength development of cementitious materials, ensuring consistency and reliability in quality control and specification compliance.

This CERT specifies laboratory procedures to assess the durability of concrete specimens under rapid freezing and thawing cycles, evaluating their resistance to such conditions.

This CERT specifies the procedure for determining the splitting tensile strength of cylindrical concrete specimens, such as molded cylinders and drilled cores, to assess concrete's resistance to tensile stresses.

This CERT specifies the requirements for packaged, dry, rapid-hardening cementitious materials intended for repairing hardened hydraulic-cement concrete pavements and structures. It ensures that such materials meet specific performance criteria for effective and durable repairs.

This CERT provides a standardized test method for assessing the electrical conductance of concrete to rapidly indicate its resistance to chloride ion penetration, which is crucial for evaluating durability against corrosion.

This CERT specifies a standardized test method for determining the density (unit weight), yield, and air content (gravimetric) of freshly mixed concrete, ensuring quality control in construction applications.

This CERT specifies a standardized test method for determining the length change of hardened hydraulic-cement mortar and concrete specimens due to factors other than externally applied forces and temperature variations, ensuring quality control in construction materials.

This CERT provides a standardized test method for evaluating the tensile strength of concrete surfaces and the bond strength of repair or overlay materials by direct tension (pull-off method), ensuring quality and durability in construction applications.

This CERT specifies the procedure for determining the bond strength of epoxy-resin-based bonding systems used with portland-cement concrete, assessing the effectiveness of these systems in adhering hardened concrete to either hardened or freshly mixed concrete.

This CERT specifies the test method for determining the setting time of hydraulic-cement paste using Gillmore needles, ensuring cement's suitability for construction applications.

This CERT outlines the test method for measuring concrete's flexural strength using a simple beam with center-point loading, ensuring its load-bearing capacity.

This CERT specifies the procedure for determining the static modulus of elasticity (Young's modulus) and Poisson's ratio of concrete in compression, essential for assessing concrete's deformation characteristics under load.

This CERT specifies a test method for determining the compressive strength of hydraulic cement mortars using 2-inch (50 mm) cube specimens. It provides a standardized procedure to assess the strength development of cementitious materials, ensuring consistency and reliability in quality control and specification compliance.

This CERT specifies laboratory procedures to assess the durability of concrete specimens under rapid freezing and thawing cycles, evaluating their resistance to such conditions.

This CERT specifies a standardized test method for determining the length change of hardened hydraulic-cement mortar and concrete specimens due to factors other than externally applied forces and temperature variations, ensuring quality control in construction materials.

This CERT provides a standardized test method for evaluating the tensile strength of concrete surfaces and the bond strength of repair or overlay materials by direct tension (pull-off method), ensuring quality and durability in construction applications.

This CERT specifies standardized test methods for determining the time of setting of hydraulic cement using the Vicat needle apparatus. It provides two methods: Method A, which utilizes a manually operated Vicat apparatus, and Method B, which permits the use of an automatic Vicat machine that has demonstrated acceptable performance.

This CERT is a standard specification that defines the quality and grading requirements for fine and coarse aggregates used in concrete. It ensures aggregates are suitable for producing high-quality concrete by setting limits on deleterious substances and particle size distribution.

This CERT specifies the procedure for determining the bond strength of epoxy-resin-based bonding systems used with portland-cement concrete, assessing the effectiveness of these systems in adhering hardened concrete to either hardened or freshly mixed concrete.

This CERT specifies the requirements for packaged, dry, rapid-hardening cementitious materials intended for repairing hardened hydraulic-cement concrete pavements and structures. It ensures that such materials meet specific performance criteria for effective and durable repairs.

This CERT specifies the test method for determining the flow of hydraulic cement mortars using a flow table, ensuring consistency, workability, and uniformity in mortar applications.

This CERT specifies the test method for evaluating the scaling resistance of concrete surfaces exposed to deicing chemicals, ensuring durability and performance under freeze-thaw cycles in harsh climates.

This CERT specifies a test method for determining the compressive strength of hydraulic cement mortars using 2-inch (50 mm) cube specimens. It provides a standardized procedure to assess the strength development of cementitious materials, ensuring consistency and reliability in quality control and specification compliance.

This CERT specifies a rapid test method for detecting the potential alkali-silica reactivity of aggregates in mortar bars within 16 days. It evaluates the likelihood of deleterious internal expansion due to alkali-silica reactions, aiding in the selection of appropriate materials for concrete construction.

This CERT specifies laboratory procedures to assess the durability of concrete specimens under rapid freezing and thawing cycles, evaluating their resistance to such conditions.

This CERT specifies a standardized test method for determining the density (unit weight), yield, and air content (gravimetric) of freshly mixed concrete, ensuring quality control in construction applications.

This CERT specifies a standardized test method for determining the length change of hardened hydraulic-cement mortar and concrete specimens due to factors other than externally applied forces and temperature variations, ensuring quality control in construction materials.

This CERT outlines the procedure for determining the compressive strength of cylindrical concrete specimens, such as molded cylinders and drilled cores, ensuring concrete quality and structural integrity.

This CERT specifies the procedure for determining the splitting tensile strength of cylindrical concrete specimens, such as molded cylinders and drilled cores, to assess concrete's resistance to tensile stresses.

This CERT specifies the procedure for determining the bond strength of epoxy-resin-based bonding systems used with portland-cement concrete, assessing the effectiveness of these systems in adhering hardened concrete to either hardened or freshly mixed concrete.

This CERT specifies the test method for determining the flexural strength of hydraulic cement mortars, ensuring performance consistency and reliability for construction applications.

This CERT specifies a test method for determining the compressive strength of hydraulic cement mortars using 2-inch (50 mm) cube specimens. It provides a standardized procedure to assess the strength development of cementitious materials, ensuring consistency and reliability in quality control and specification compliance.

This CERT specifies laboratory procedures to assess the durability of concrete specimens under rapid freezing and thawing cycles, evaluating their resistance to such conditions.

This CERT provides a standardized test method for assessing the electrical conductance of concrete to rapidly indicate its resistance to chloride ion penetration, which is crucial for evaluating durability against corrosion.

This CERT provides a standardized test method for evaluating the tensile strength of concrete surfaces and the bond strength of repair or overlay materials by direct tension (pull-off method), ensuring quality and durability in construction applications.

This CERT specifies the test method for determining the setting time of hydraulic-cement paste using Gillmore needles, ensuring cement's suitability for construction applications.

This CERT outlines the test method for measuring concrete's flexural strength using a simple beam with center-point loading, ensuring its load-bearing capacity.

This CERT specifies the procedure for determining the static modulus of elasticity (Young's modulus) and Poisson's ratio of concrete in compression, essential for assessing concrete's deformation characteristics under load.

This CERT specifies the requirements for packaged, dry, rapid-hardening cementitious materials intended for repairing hardened hydraulic-cement concrete pavements and structures. It ensures that such materials meet specific performance criteria for effective and durable repairs.

This CERT specifies the test method for evaluating the scaling resistance of concrete surfaces exposed to deicing chemicals, ensuring durability and performance under freeze-thaw cycles in harsh climates.

This CERT specifies a test method for determining the compressive strength of hydraulic cement mortars using 2-inch (50 mm) cube specimens. It provides a standardized procedure to assess the strength development of cementitious materials, ensuring consistency and reliability in quality control and specification compliance.

This CERT specifies a standardized test method for determining the length change of hardened hydraulic-cement mortar and concrete specimens due to factors other than externally applied forces and temperature variations, ensuring quality control in construction materials.

This CERT specifies the requirements for packaged, dry, rapid-hardening cementitious materials intended for repairing hardened hydraulic-cement concrete pavements and structures. It ensures that such materials meet specific performance criteria for effective and durable repairs.

This CERT specifies the test method for determining the flexural strength of hydraulic cement mortars, ensuring performance consistency and reliability for construction applications.

This CERT specifies the test method for evaluating the scaling resistance of concrete surfaces exposed to deicing chemicals, ensuring durability and performance under freeze-thaw cycles in harsh climates.

This CERT indicates that a product has been tested and certified for low volatile organic compound (VOC) emissions, ensuring it contributes to healthier indoor air quality.

This CERT specifies a test method for determining the compressive strength of hydraulic cement mortars using 2-inch (50 mm) cube specimens. It provides a standardized procedure to assess the strength development of cementitious materials, ensuring consistency and reliability in quality control and specification compliance.

This CERT specifies laboratory procedures to assess the durability of concrete specimens under rapid freezing and thawing cycles, evaluating their resistance to such conditions.

This CERT provides a standardized test method for assessing the electrical conductance of concrete to rapidly indicate its resistance to chloride ion penetration, which is crucial for evaluating durability against corrosion.

This CERT specifies the procedure for determining the flexural strength of concrete using a simple beam with third-point loading, providing a measure of the material's ability to resist bending.

This CERT specifies the procedure for determining the bond strength of epoxy-resin-based bonding systems used with portland-cement concrete, assessing the effectiveness of these systems in adhering hardened concrete to either hardened or freshly mixed concrete.

This CERT specifies the requirements for packaged, dry, rapid-hardening cementitious materials intended for repairing hardened hydraulic-cement concrete pavements and structures. It ensures that such materials meet specific performance criteria for effective and durable repairs.

This CERT specifies the test method for evaluating the scaling resistance of concrete surfaces exposed to deicing chemicals, ensuring durability and performance under freeze-thaw cycles in harsh climates.

This CERT specifies laboratory procedures to assess the durability of concrete specimens under rapid freezing and thawing cycles, evaluating their resistance to such conditions.

This CERT specifies the procedure for determining the bond strength of epoxy-resin-based bonding systems used with portland-cement concrete, assessing the effectiveness of these systems in adhering hardened concrete to either hardened or freshly mixed concrete.

This CERT specifies the requirements for packaged, dry, rapid-hardening cementitious materials intended for repairing hardened hydraulic-cement concrete pavements and structures. It ensures that such materials meet specific performance criteria for effective and durable repairs.

This CERT specifies the test method for evaluating the scaling resistance of concrete surfaces exposed to deicing chemicals, ensuring durability and performance under freeze-thaw cycles in harsh climates.

This CERT indicates that a product has been tested and certified for low volatile organic compound (VOC) emissions, ensuring it contributes to healthier indoor air quality.

This CERT ensures that products in contact with drinking water meet health and safety standards under NSF/ANSI/CAN 61-2022. It addresses material safety, ensuring no harmful contaminants are leached into potable water, supporting public health protection in plumbing systems.

This CERT specifies a test method for determining the compressive strength of hydraulic cement mortars using 2-inch (50 mm) cube specimens. It provides a standardized procedure to assess the strength development of cementitious materials, ensuring consistency and reliability in quality control and specification compliance.

This CERT specifies laboratory procedures to assess the durability of concrete specimens under rapid freezing and thawing cycles, evaluating their resistance to such conditions.

This CERT provides a standardized test method for assessing the electrical conductance of concrete to rapidly indicate its resistance to chloride ion penetration, which is crucial for evaluating durability against corrosion.

This CERT specifies the test method for determining the setting time of hydraulic-cement paste using Gillmore needles, ensuring cement's suitability for construction applications.

This CERT specifies the procedure for determining the splitting tensile strength of cylindrical concrete specimens, such as molded cylinders and drilled cores, to assess concrete's resistance to tensile stresses.

This CERT specifies the procedure for determining the flexural strength of concrete using a simple beam with third-point loading, providing a measure of the material's ability to resist bending.

This CERT specifies the procedure for determining the bond strength of epoxy-resin-based bonding systems used with portland-cement concrete, assessing the effectiveness of these systems in adhering hardened concrete to either hardened or freshly mixed concrete.

This CERT designates products as "Red List Free," meaning they do not contain chemicals from the Living Building Challenge’s Red List, which includes harmful substances known to be hazardous to human health and the environment. Red List Free products are safe for use in sustainable, eco-conscious building projects.

This CERT specifies a test method for determining the compressive strength of hydraulic cement mortars using 2-inch (50 mm) cube specimens. It provides a standardized procedure to assess the strength development of cementitious materials, ensuring consistency and reliability in quality control and specification compliance.

This CERT specifies the test method for determining the flexural strength of hydraulic cement mortars, ensuring performance consistency and reliability for construction applications.

This CERT aims to reduce emissions of volatile organic compounds (VOCs), toxic air contaminants, and ozone-depleting compounds from the use of adhesives, adhesive primers, sealants, and sealant primers within the South Coast Air Quality Management District.

This CERT specifies a test method for determining the compressive strength of hydraulic cement mortars using 2-inch (50 mm) cube specimens. It provides a standardized procedure to assess the strength development of cementitious materials, ensuring consistency and reliability in quality control and specification compliance.

This CERT specifies the procedure for determining the bond strength of epoxy-resin-based bonding systems used with portland-cement concrete, assessing the effectiveness of these systems in adhering hardened concrete to either hardened or freshly mixed concrete.

This CERT specifies the test methods for measuring the abrasion resistance of horizontal concrete surfaces, ensuring durability and performance in high-traffic and abrasive environments.

This CERT specifies the requirements for epoxy-resin-based bonding systems used in concrete, ensuring their strength, adhesion, and performance in structural and repair applications.

This CERT specifies a test method for determining the bond strength between ceramic tiles—including glazed wall tiles, mosaic tiles, quarry tiles, porcelain tiles, and paver tiles—and Portland cement paste. It provides a standardized procedure to assess the adhesive capability of tiles to cementitious substrates, ensuring durability and performance in various applications.

This CERT specifies the requirements for preblended dry mortar mixes for masonry, ensuring consistency, quality, and performance in masonry construction by regulating properties such as workability, strength, and durability.

This CERT specifies the requirements for mortar for unit masonry, focusing on its physical properties, such as compressive strength, water retention, and workability, ensuring durability and consistency in masonry construction.

This CERT specifies a test method for determining the bond strength between ceramic tiles—including glazed wall tiles, mosaic tiles, quarry tiles, porcelain tiles, and paver tiles—and Portland cement paste. It provides a standardized procedure to assess the adhesive capability of tiles to cementitious substrates, ensuring durability and performance in various applications.

This CERT specifies the requirements for preblended dry mortar mixes for masonry, ensuring consistency, quality, and performance in masonry construction by regulating properties such as workability, strength, and durability.

This CERT specifies the requirements for mortar for unit masonry, focusing on its physical properties, such as compressive strength, water retention, and workability, ensuring durability and consistency in masonry construction.

This CERT specifies the requirements for preblended dry mortar mixes for masonry, ensuring consistency, quality, and performance in masonry construction by regulating properties such as workability, strength, and durability.

This CERT specifies the requirements for mortar for unit masonry, focusing on its physical properties, such as compressive strength, water retention, and workability, ensuring durability and consistency in masonry construction.

This CERT specifies requirements for mortar and grout used in unit masonry construction, ensuring consistency in materials and performance for structural integrity and durability.

This CERT specifies the requirements for preblended dry mortar mixes for masonry, ensuring consistency, quality, and performance in masonry construction by regulating properties such as workability, strength, and durability.

This CERT specifies the requirements for mortar for unit masonry, focusing on its physical properties, such as compressive strength, water retention, and workability, ensuring durability and consistency in masonry construction.

This CERT specifies requirements for mortar and grout used in unit masonry construction, ensuring consistency in materials and performance for structural integrity and durability.

This CERT specifies the test methods for evaluating the strength of masonry assemblages, focusing on shear, flexural bond, and tensile bond strength to ensure structural integrity and performance in masonry construction.

This CERT specifies the requirements for mortar for unit masonry, focusing on its physical properties, such as compressive strength, water retention, and workability, ensuring durability and consistency in masonry construction.

This CERT specifies requirements for mortar and grout used in unit masonry construction, ensuring consistency in materials and performance for structural integrity and durability.

This CERT specifies the requirements for mortar cement used in masonry construction, focusing on performance attributes such as strength, workability, and durability for reliable and consistent masonry applications.

This CERT specifies the requirements for aggregate used in masonry mortar, focusing on gradation, cleanliness, and material properties to ensure consistency, workability, and durability in masonry construction.

This CERT specifies the requirements for mortar for unit masonry, focusing on its physical properties, such as compressive strength, water retention, and workability, ensuring durability and consistency in masonry construction.

This CERT specifies the requirements for preblended dry mortar mixes for masonry, ensuring consistency, quality, and performance in masonry construction by regulating properties such as workability, strength, and durability.

This CERT specifies the requirements for mortar for unit masonry, focusing on its physical properties, such as compressive strength, water retention, and workability, ensuring durability and consistency in masonry construction.

This CERT specifies the requirements for preblended dry mortar mixes for masonry, ensuring consistency, quality, and performance in masonry construction by regulating properties such as workability, strength, and durability.

This CERT specifies the requirements for mortar for unit masonry, focusing on its physical properties, such as compressive strength, water retention, and workability, ensuring durability and consistency in masonry construction.

This CERT specifies the requirements for preblended dry mortar mixes for masonry, ensuring consistency, quality, and performance in masonry construction by regulating properties such as workability, strength, and durability.

This CERT specifies the requirements for mortar for unit masonry, focusing on its physical properties, such as compressive strength, water retention, and workability, ensuring durability and consistency in masonry construction.

This CERT verifies that products meet stricter indoor air quality standards set by SCS Global Services, ensuring very low emissions of volatile organic compounds (VOCs) suitable for sensitive environments like schools and healthcare facilities.

This CERT specifies the production, properties, packaging, and testing of packaged, dry, combined materials for concrete and high-strength mortar, ensuring consistent quality for construction applications.

This CERT specifies the requirements for mortar for unit masonry, focusing on its physical properties, such as compressive strength, water retention, and workability, ensuring durability and consistency in masonry construction.

This CERT specifies the requirements for aggregate used in masonry mortar, focusing on gradation, cleanliness, and material properties to ensure consistency, workability, and durability in masonry construction.

This CERT defines specifications and conformity criteria for building lime used in construction applications, ensuring material quality and performance.