HVAC
47 ProductsEach time you see a score on Eqogo, remember that it is relative to its product category. What does this mean?
Select 2 to 5 items to compare in detail.
Knauf Insulation Earthwool Insulation Board | Knauf Insulation
Earthwool Insulation Board is bonded with our revolutionary ECOSE Technology, making it a more sustainable choice. Ready to learn more? Click here.Scored Product Attributes
95
Materials | |||
---|---|---|---|
Formaldehyde Free |
|||
PBDE Free |
Certifications | |||
---|---|---|---|
This CERT defines a method for assessing the corrosivity of materials, especially in chloride-rich environments, to ensure the durability of reinforced concrete structures. ASTM C1617 helps evaluate the potential for corrosion, supporting material reliability in construction projects.
|
|||
This CERT verifies that products meet high standards for low chemical emissions, making them suitable for sensitive environments like schools and healthcare facilities by minimizing exposure to pollutants and volatile organic compounds (VOCs).
|
|||
This CERT specifies requirements for mineral fiber board insulation intended for thermal and acoustical applications in buildings. ASTM C612 ensures these insulation products meet performance criteria for density, thermal resistance, and structural stability, supporting energy efficiency and sound control.
|
|||
This CERT defines a test method for assessing the hot-surface performance of thermal insulation materials. ASTM C411 ensures insulation can withstand continuous high-temperature exposure without deterioration, critical for applications involving heated equipment or surfaces.
|
|||
This CERT verifies that mineral wool products meet biosolubility criteria, ensuring they are safe for human health under the European Union’s REACH regulation. EUCEB Certification demonstrates that mineral wool insulation materials do not pose carcinogenic risks, supporting safe usage in building applications.
|
|||
This CERT specifies test methods for measuring the water vapor transmission rate (WVTR) of materials, particularly in building applications where moisture control is critical. ASTM E96 ensures materials have adequate moisture resistance, supporting durability and performance in environments prone to humidity.
|
|||
This CERT verifies that products meet rigorous safety and performance standards set by UL, ensuring they have been tested and approved for use in specific environments, such as electrical systems and appliances.
|
|||
This CERT verifies that products meet strict standards for low chemical emissions, contributing to healthier indoor air quality by reducing exposure to pollutants and volatile organic compounds (VOCs).
|
|||
This CERT specifies a test method for measuring the bursting strength of paper and paperboard materials. ASTM D774 is essential for determining material durability, helping to ensure that paper products can withstand pressure without rupture, making it valuable for packaging and shipping applications.
|
|||
This CERT verifies that products are free from formaldehyde, ensuring compliance with strict environmental and safety standards as validated by UL for healthier indoor environments.
|
|||
|
|||
This CERT is awarded by the California Energy Commission (CEC) for products meeting specific energy efficiency and performance standards. CEC certification ensures that products comply with California’s energy conservation regulations, promoting sustainability and reducing energy consumption.
|
|||
This CERT defines material and performance specifications for mineral-fiber blanket insulation used in light-frame construction, particularly where moisture and fire resistance are required. ASTM C665 helps ensure insulation provides effective thermal, moisture, and fire-resistant properties.
|
|||
This CERT designates products as "Red List Free," meaning they do not contain chemicals from the Living Building Challenge’s Red List, which includes harmful substances known to be hazardous to human health and the environment. Red List Free products are safe for use in sustainable, eco-conscious building projects.
|
|||
This CERT defines material requirements for mineral fiber blankets used as thermal insulation in a variety of applications. ASTM C553 ensures these insulation materials meet performance standards for thermal resistance, density, and physical properties, supporting energy efficiency and durability.
|
|||
This CERT outlines a method to measure the water vapor sorption of insulation materials, helping to ensure thermal efficiency and durability in humid conditions. ASTM C1104 supports quality control for insulation used in various construction and HVAC applications.
|
|||
This CERT specifies performance requirements for vapor retarders used with thermal insulation in buildings, ensuring effective moisture control and protection of insulation materials. ASTM C1136 aids in selecting vapor retarder facings that prevent water vapor transmission, protecting insulation efficiency and durability.
|
|||
This CERT provides a standardized method for testing and classifying insulation materials based on their smolder resistance. CAN/ULC S129 assesses the smoldering characteristics of loose-fill insulation, ensuring that products reduce the risk of fire spread when exposed to smoldering combustion sources, such as electrical faults or embers.
|
|||
This CERT establishes a test method for assessing the resistance of insulation materials to fungal growth, ensuring materials maintain structural integrity and do not promote mold in humid conditions. ASTM C1338 is crucial for applications where moisture exposure is likely.
|
|||
This CERT outlines test methods for determining the non-combustibility of building materials. CAN/ULC S114 assesses whether materials contribute to fire spread, a critical standard in Canada for materials used in fire-resistant construction, ensuring they do not ignite or support combustion under standard testing conditions.
|
|||
This CERT outlines a standard test method for assessing the surface burning characteristics of building materials. ASTM E84, also known as the "Steiner Tunnel Test," measures flame spread and smoke development, essential for determining the fire safety of materials used in construction
|
|||
This CERT defines a test method for evaluating the linear shrinkage of thermal insulation materials at elevated temperatures. ASTM C356 ensures that insulation materials maintain dimensional stability, which is critical for thermal performance in high-temperature applications.
|
|||
Warranty: 1 year |
Good To Know - Brand Attributes
Enviro
Outline for reaching near or at carbon zero emissions by 2030
Governance
- Brand must describe itself in some way or form as family owned. Do not assume
Knauf Insulation Performance+ EcoBatt Insulation | Knauf Insulation
EcoBatt Insulation is a sustainable insulation made with sand and recycled bottle glass and bonded with ECOSE Technology. Learn more.Scored Product Attributes
82
Materials | |||
---|---|---|---|
Recycled Glass |
Certifications | |||
---|---|---|---|
This CERT verifies that products meet strict standards for low chemical emissions, contributing to healthier indoor air quality by reducing exposure to pollutants and volatile organic compounds (VOCs).
|
|||
This CERT verifies that products meet high standards for low chemical emissions, making them suitable for sensitive environments like schools and healthcare facilities by minimizing exposure to pollutants and volatile organic compounds (VOCs).
|
|||
This program helps patients to understand product claims and make informed purchases. We test household products against strict standards. If products pass our tests, they earn the asthma & allergy friendly® Certification Mark.
|
|||
This CERT outlines a test method for measuring the thermal resistance (R-value) and thermal conductivity of insulation materials, critical for energy efficiency in building applications. ASTM C518 provides reliable data on insulation performance, aiding in the selection of effective materials.
|
|||
This CERT verifies that products meet energy efficiency standards set by the U.S. Environmental Protection Agency (EPA), reducing energy consumption and environmental impact.
|
|||
This CERT specifies test methods for measuring the water vapor transmission rate (WVTR) of materials, particularly in building applications where moisture control is critical. ASTM E96 ensures materials have adequate moisture resistance, supporting durability and performance in environments prone to humidity.
|
|||
This CERT defines material and performance specifications for mineral-fiber blanket insulation used in light-frame construction, particularly where moisture and fire resistance are required. ASTM C665 helps ensure insulation provides effective thermal, moisture, and fire-resistant properties.
|
|||
This CERT verifies that mineral wool products meet biosolubility criteria, ensuring they are safe for human health under the European Union’s REACH regulation. EUCEB Certification demonstrates that mineral wool insulation materials do not pose carcinogenic risks, supporting safe usage in building applications.
|
|||
This CERT outlines a standard test method for assessing the surface burning characteristics of building materials. ASTM E84, also known as the "Steiner Tunnel Test," measures flame spread and smoke development, essential for determining the fire safety of materials used in construction
|
|||
This CERT verifies that products are free from formaldehyde, ensuring compliance with strict environmental and safety standards as validated by UL for healthier indoor environments.
|
|||
|
|||
This CERT is awarded by the California Energy Commission (CEC) for products meeting specific energy efficiency and performance standards. CEC certification ensures that products comply with California’s energy conservation regulations, promoting sustainability and reducing energy consumption.
|
|||
This CERT designates products as "Red List Free," meaning they do not contain chemicals from the Living Building Challenge’s Red List, which includes harmful substances known to be hazardous to human health and the environment. Red List Free products are safe for use in sustainable, eco-conscious building projects.
|
|||
This CERT provides a test method for determining the non-combustibility of building materials. ASTM E136 is essential for ensuring materials will not contribute to fire spread, particularly in applications where fire safety is critical, such as walls, ceilings, and structural components in buildings.
|
|||
This CERT outlines a method to measure the water vapor sorption of insulation materials, helping to ensure thermal efficiency and durability in humid conditions. ASTM C1104 supports quality control for insulation used in various construction and HVAC applications.
|
|||
This CERT establishes a test method for assessing the resistance of insulation materials to fungal growth, ensuring materials maintain structural integrity and do not promote mold in humid conditions. ASTM C1338 is crucial for applications where moisture exposure is likely.
|
|||
This CERT specifies test methods for measuring the thickness and density of blanket or batt thermal insulation. ASTM C167 ensures accurate material specifications, critical for insulation effectiveness and energy efficiency in building applications.
|
|||
Warranty: 1 year |
Good To Know - Brand Attributes
Enviro
Outline for reaching near or at carbon zero emissions by 2030
Governance
- Brand must describe itself in some way or form as family owned. Do not assume
Knauf Insulation Performance+ Jet Stream Ultra Blowing Wool | Knauf Insulation
Jet Stream ULTRA Blowing Wool Insulation is designed with optimal thermal properties, coverage and blowing qualities. Reach out for product support today!Scored Product Attributes
81
Materials | |||
---|---|---|---|
Recycled Glass |
Certifications | |||
---|---|---|---|
This CERT verifies that products meet energy efficiency standards set by the U.S. Environmental Protection Agency (EPA), reducing energy consumption and environmental impact.
|
|||
This CERT verifies that products meet high standards for low chemical emissions, making them suitable for sensitive environments like schools and healthcare facilities by minimizing exposure to pollutants and volatile organic compounds (VOCs).
|
|||
This program helps patients to understand product claims and make informed purchases. We test household products against strict standards. If products pass our tests, they earn the asthma & allergy friendly® Certification Mark.
|
|||
This CERT verifies that products meet strict standards for low chemical emissions, contributing to healthier indoor air quality by reducing exposure to pollutants and volatile organic compounds (VOCs).
|
|||
This CERT verifies that products are free from formaldehyde, ensuring compliance with strict environmental and safety standards as validated by UL for healthier indoor environments.
|
|||
|
|||
This CERT is awarded by the California Energy Commission (CEC) for products meeting specific energy efficiency and performance standards. CEC certification ensures that products comply with California’s energy conservation regulations, promoting sustainability and reducing energy consumption.
|
|||
This CERT designates products as "Red List Free," meaning they do not contain chemicals from the Living Building Challenge’s Red List, which includes harmful substances known to be hazardous to human health and the environment. Red List Free products are safe for use in sustainable, eco-conscious building projects.
|
|||
This CERT outlines a method to measure the water vapor sorption of insulation materials, helping to ensure thermal efficiency and durability in humid conditions. ASTM C1104 supports quality control for insulation used in various construction and HVAC applications.
|
|||
This CERT establishes a test method for assessing the resistance of insulation materials to fungal growth, ensuring materials maintain structural integrity and do not promote mold in humid conditions. ASTM C1338 is crucial for applications where moisture exposure is likely.
|
|||
This CERT provides a standardized method for assessing the surface burning characteristics of building materials and assemblies in Canada. CAN/ULC S102 evaluates flame spread and smoke development, essential for determining fire safety and compliance with Canadian building codes.
|
|||
This CERT provides a test method for determining the non-combustibility of building materials. ASTM E136 is essential for ensuring materials will not contribute to fire spread, particularly in applications where fire safety is critical, such as walls, ceilings, and structural components in buildings.
|
|||
This CERT outlines a standard test method for assessing the surface burning characteristics of building materials. ASTM E84, also known as the "Steiner Tunnel Test," measures flame spread and smoke development, essential for determining the fire safety of materials used in construction
|
|||
This CERT specifies a test method for measuring the solar reflectance of clear, high-transmission glass used in buildings. ASTM E970 helps assess the ability of glass materials to control solar heat gain, supporting energy efficiency and thermal comfort in buildings.
|
|||
This CERT specifies requirements for mineral fiber loose-fill insulation used in attics and wall cavities for thermal applications. ASTM C764 ensures that insulation meets criteria for thermal resistance, density, and combustibility, contributing to energy efficiency and fire safety in residential and commercial buildings.
|
|||
This CERT verifies that mineral wool products meet biosolubility criteria, ensuring they are safe for human health under the European Union’s REACH regulation. EUCEB Certification demonstrates that mineral wool insulation materials do not pose carcinogenic risks, supporting safe usage in building applications.
|
|||
Warranty: 1 year |
Good To Know - Brand Attributes
Enviro
Outline for reaching near or at carbon zero emissions by 2030
Governance
- Brand must describe itself in some way or form as family owned. Do not assume
ROCKWOOL ROCKWOOL ROXUL Safe a semi-rigid, mineral wool batt insulation designed to provide enhanced fire protection | ROCKWOOL
ROXUL Safe is a semi-rigid, mineral wool batt insulation designed to provide enhanced fire protection in perimeter fire containment systems, floor and wall through penetrations, construction joints, and other fire stopping applications.Scored Product Attributes
77
Certifications | |||
---|---|---|---|
This CERT outlines a method to measure the water vapor sorption of insulation materials, helping to ensure thermal efficiency and durability in humid conditions. ASTM C1104 supports quality control for insulation used in various construction and HVAC applications.
|
|||
This CERT verifies that products meet North American safety standards as tested and certified by Intertek to ensure compliance with electrical, gas and other safety regulations.
|
|||
This CERT verifies that products meet high standards for low chemical emissions, making them suitable for sensitive environments like schools and healthcare facilities by minimizing exposure to pollutants and volatile organic compounds (VOCs).
|
|||
This CERT verifies that products meet rigorous safety and performance standards set by UL, ensuring they have been tested and approved for use in specific environments, such as electrical systems and appliances.
|
|||
This CERT provides a standardized method for testing and classifying insulation materials based on their smolder resistance. CAN/ULC S129 assesses the smoldering characteristics of loose-fill insulation, ensuring that products reduce the risk of fire spread when exposed to smoldering combustion sources, such as electrical faults or embers.
|
|||
This CERT establishes a test method for assessing the resistance of insulation materials to fungal growth, ensuring materials maintain structural integrity and do not promote mold in humid conditions. ASTM C1338 is crucial for applications where moisture exposure is likely.
|
|||
This CERT specifies a test method for measuring the density of insulation materials, critical for assessing thermal performance, durability, and suitability for different building applications. ASTM C303 supports quality assurance in the production and application of insulation.
|
|||
This CERT specifies material requirements for thermal insulation, specifically mineral fiber insulation boards, intended for use in buildings. CAN/ULC S702 covers performance metrics such as thermal resistance, compressive strength, and dimensional stability, ensuring insulation products meet quality and safety standards for energy efficiency in Canadian construction.
|
|||
The Declare Label, developed by the International Living Future Institute (ILFI), serves as a transparency platform and product database aimed at promoting healthy building materials. It provides detailed information about a product's composition, origin, and end-of-life options.
|
|||
This CERT outlines a standard test method for assessing the surface burning characteristics of building materials. ASTM E84, also known as the "Steiner Tunnel Test," measures flame spread and smoke development, essential for determining the fire safety of materials used in construction
|
|||
This CERT outlines test methods for determining the non-combustibility of building materials. CAN/ULC S114 assesses whether materials contribute to fire spread, a critical standard in Canada for materials used in fire-resistant construction, ensuring they do not ignite or support combustion under standard testing conditions.
|
|||
This CERT specifies requirements for mineral fiber board insulation intended for thermal and acoustical applications in buildings. ASTM C612 ensures these insulation products meet performance criteria for density, thermal resistance, and structural stability, supporting energy efficiency and sound control.
|
|||
This CERT defines material and performance specifications for mineral-fiber blanket insulation used in light-frame construction, particularly where moisture and fire resistance are required. ASTM C665 helps ensure insulation provides effective thermal, moisture, and fire-resistant properties.
|
|||
This CERT specifies requirements for insulation materials intended for use in contact with austenitic stainless steel to minimize the risk of corrosion. ASTM C795 ensures that insulation materials are compatible with stainless steel, particularly in high-temperature applications, and prevents chloride-induced corrosion.
|
|||
This CERT provides test methods for evaluating the fire-resistance of building materials and assemblies, assessing their ability to contain fire and withstand high temperatures. ASTM E119 is critical for ensuring the safety of structural components in buildings, particularly in fire-rated construction.
|
|||
This CERT provides a test method for determining the non-combustibility of building materials. ASTM E136 is essential for ensuring materials will not contribute to fire spread, particularly in applications where fire safety is critical, such as walls, ceilings, and structural components in buildings.
|
|||
Warranty: 1 - 19 Day |
Good To Know - Brand Attributes
Social
Company participates in community outreach or activism programs.
This brand supports Diversity, Equity, and Inclusion (DEI) initiatives, promoting a diverse and inclusive workplace and community.
Enviro
This brand participates in carbon offset programs to neutralize its carbon emissions.
This brand supports initiatives to protect water resources and reduce water consumption.
CertainTeed InsulSafe SP Premium Blowing Insulation | CertainTeed
InsulSafe® SP Premium Blowing Wool by CertainTeed is a top-performing insulation product designed to provide excellent thermal resistance, noise reduction, fire-resistance and sustainability. Made from premium quality fiberglass, it's easy to install and perfect for enhancing energy efficiency and reducing energy costs.Scored Product Attributes
74
Materials | |||
---|---|---|---|
Formaldehyde Free |
|||
Asbestos Free |
Certifications | |||
---|---|---|---|
This CERT establishes test methods for determining the preformed insulation’s performance when subjected to aging processes. ASTM C687 is crucial for assessing the long-term stability of insulation materials in construction, ensuring they retain their thermal performance over time.
|
|||
This CERT verifies that products meet high standards for low chemical emissions, making them suitable for sensitive environments like schools and healthcare facilities by minimizing exposure to pollutants and volatile organic compounds (VOCs).
|
|||
This CERT verifies that products meet energy efficiency standards set by the U.S. Environmental Protection Agency (EPA), reducing energy consumption and environmental impact.
|
|||
|
|||
This CERT outlines a method to measure the water vapor sorption of insulation materials, helping to ensure thermal efficiency and durability in humid conditions. ASTM C1104 supports quality control for insulation used in various construction and HVAC applications.
|
|||
This CERT defines a test method for evaluating the surface burning characteristics of building materials. UL 723 measures flame spread and smoke development, essential for determining the fire safety of materials used in construction, particularly in interior finishes. Compliance with UL 723 helps materials meet building codes and fire safety standards.
|
|||
This CERT specifies test methods for assessing the adhesive and cohesive strength of sealants used with building materials, especially under varied conditions. ASTM C1304 is essential for ensuring sealants maintain effectiveness and durability when exposed to environmental stresses.
|
|||
This CERT outlines a standard test method for assessing the surface burning characteristics of building materials. ASTM E84, also known as the "Steiner Tunnel Test," measures flame spread and smoke development, essential for determining the fire safety of materials used in construction
|
|||
This CERT establishes a test method for assessing the resistance of insulation materials to fungal growth, ensuring materials maintain structural integrity and do not promote mold in humid conditions. ASTM C1338 is crucial for applications where moisture exposure is likely.
|
|||
This CERT outlines a test method for measuring the thermal resistance (R-value) and thermal conductivity of insulation materials, critical for energy efficiency in building applications. ASTM C518 provides reliable data on insulation performance, aiding in the selection of effective materials.
|
|||
This CERT specifies requirements for mineral fiber loose-fill insulation used in attics and wall cavities for thermal applications. ASTM C764 ensures that insulation meets criteria for thermal resistance, density, and combustibility, contributing to energy efficiency and fire safety in residential and commercial buildings.
|
|||
This CERT provides a test method for determining the airborne sound transmission loss of building partitions and elements. ASTM E90 is essential for evaluating the soundproofing effectiveness of walls, floors, and ceilings, supporting noise control in residential, commercial, and industrial spaces.
|
|||
This CERT provides a test method for determining the non-combustibility of building materials. ASTM E136 is essential for ensuring materials will not contribute to fire spread, particularly in applications where fire safety is critical, such as walls, ceilings, and structural components in buildings.
|
|||
This CERT specifies a test method for measuring the solar reflectance of clear, high-transmission glass used in buildings. ASTM E970 helps assess the ability of glass materials to control solar heat gain, supporting energy efficiency and thermal comfort in buildings.
|
|||
This CERT specifies a method for determining the sound transmission class (STC) of building partitions, floors, ceilings, and doors, which is essential for evaluating soundproofing effectiveness. ASTM E413 aids in ensuring acoustic privacy and noise control in various construction applications.
|
|||
Warranty: Limited Lifetime |
Good To Know - Brand Attributes
Enviro
This brand participates in programs that upcycle, repurpose, or utilize deadstock materials to create new products.
This brand participates in carbon offset programs to neutralize its carbon emissions.
This brand supports initiatives to protect water resources and reduce water consumption.
This brand offers recycling services for its purchased products or for products within the same industry.
Outline for reaching near or at carbon zero emissions by 2030
ROCKWOOL ROCKWOOL AFB semi-rigid acoustical fire batt insulation for interior steel and wood stud wall and floor applications | ROCKWOOL
AFB is a lightweight, semi-rigid batt insulation for steel stud interior wall and floor applications. Designed for fire resistance and acoustic comfort. Also available as AFB evo, a no added formaldehyde insulation.Scored Product Attributes
64
Certifications | |||
---|---|---|---|
This CERT specifies a test method for measuring the density of insulation materials, critical for assessing thermal performance, durability, and suitability for different building applications. ASTM C303 supports quality assurance in the production and application of insulation.
|
|||
This CERT verifies that products meet high standards for low chemical emissions, making them suitable for sensitive environments like schools and healthcare facilities by minimizing exposure to pollutants and volatile organic compounds (VOCs).
|
|||
This CERT verifies that products are made from renewable biological resources, ensuring they meet the biobased content standards set by the U.S. Department of Agriculture.
|
|||
This CERT provides a test method for determining the airborne sound transmission loss of building partitions and elements. ASTM E90 is essential for evaluating the soundproofing effectiveness of walls, floors, and ceilings, supporting noise control in residential, commercial, and industrial spaces.
|
|||
This CERT verifies that products meet rigorous safety and performance standards set by UL, ensuring they have been tested and approved for use in specific environments, such as electrical systems and appliances.
|
|||
This CERT designates products as "Red List Free," meaning they do not contain chemicals from the Living Building Challenge’s Red List, which includes harmful substances known to be hazardous to human health and the environment. Red List Free products are safe for use in sustainable, eco-conscious building projects.
|
|||
This CERT specifies material requirements for thermal insulation, specifically mineral fiber insulation boards, intended for use in buildings. CAN/ULC S702 covers performance metrics such as thermal resistance, compressive strength, and dimensional stability, ensuring insulation products meet quality and safety standards for energy efficiency in Canadian construction.
|
|||
This CERT specifies a test method for measuring the sound absorption of materials, particularly in acoustic applications. ASTM C423 is essential for evaluating materials used in soundproofing and noise control, providing reliable data on acoustic performance for building and industrial environments.
|
|||
This CERT defines material requirements for mineral fiber blankets used as thermal insulation in a variety of applications. ASTM C553 ensures these insulation materials meet performance standards for thermal resistance, density, and physical properties, supporting energy efficiency and durability.
|
|||
This CERT defines material and performance specifications for mineral-fiber blanket insulation used in light-frame construction, particularly where moisture and fire resistance are required. ASTM C665 helps ensure insulation provides effective thermal, moisture, and fire-resistant properties.
|
|||
This CERT specifies requirements for insulation materials intended for use in contact with austenitic stainless steel to minimize the risk of corrosion. ASTM C795 ensures that insulation materials are compatible with stainless steel, particularly in high-temperature applications, and prevents chloride-induced corrosion.
|
|||
This CERT provides a test method for determining the non-combustibility of building materials. ASTM E136 is essential for ensuring materials will not contribute to fire spread, particularly in applications where fire safety is critical, such as walls, ceilings, and structural components in buildings.
|
|||
This CERT provides a standardized method for assessing the surface burning characteristics of building materials and assemblies in Canada. CAN/ULC S102 evaluates flame spread and smoke development, essential for determining fire safety and compliance with Canadian building codes.
|
|||
This CERT outlines a standard test method for assessing the surface burning characteristics of building materials. ASTM E84, also known as the "Steiner Tunnel Test," measures flame spread and smoke development, essential for determining the fire safety of materials used in construction
|
|||
Warranty: 1 - 19 Day |
Good To Know - Brand Attributes
Social
Company participates in community outreach or activism programs.
This brand supports Diversity, Equity, and Inclusion (DEI) initiatives, promoting a diverse and inclusive workplace and community.
Enviro
This brand participates in carbon offset programs to neutralize its carbon emissions.
This brand supports initiatives to protect water resources and reduce water consumption.
Owens Corning Multipurpose Insulation Roll
Owens Corning PINK Insulation is soft to the touch and easy to install. The multipurpose roll is ideal for small projects and offers exceptional thermal and noise control performance.Scored Product Attributes
63
Materials | |||
---|---|---|---|
Post-Consumer Recycled Glass |
|||
Pre-consumer Recycled Glass |
Certifications | |||
---|---|---|---|
This CERT outlines a method to measure the water vapor sorption of insulation materials, helping to ensure thermal efficiency and durability in humid conditions. ASTM C1104 supports quality control for insulation used in various construction and HVAC applications.
|
|||
This CERT verifies that products meet high standards for low chemical emissions, making them suitable for sensitive environments like schools and healthcare facilities by minimizing exposure to pollutants and volatile organic compounds (VOCs).
|
|||
This CERT verifies that products meet energy efficiency standards set by the U.S. Environmental Protection Agency (EPA), reducing energy consumption and environmental impact.
|
|||
This CERT specifies test methods for assessing the adhesive and cohesive strength of sealants used with building materials, especially under varied conditions. ASTM C1304 is essential for ensuring sealants maintain effectiveness and durability when exposed to environmental stresses.
|
|||
This CERT establishes a test method for assessing the resistance of insulation materials to fungal growth, ensuring materials maintain structural integrity and do not promote mold in humid conditions. ASTM C1338 is crucial for applications where moisture exposure is likely.
|
|||
This CERT provides third-party-verified environmental data on products, based on lifecycle assessment (LCA) in compliance with ISO standards. UL Environmental Product Declaration (EPD) promotes transparency in environmental impact, supporting informed decisions in sustainable design and construction by detailing a product’s environmental footprint.
|
|||
This CERT outlines a test method for measuring the thermal resistance (R-value) and thermal conductivity of insulation materials, critical for energy efficiency in building applications. ASTM C518 provides reliable data on insulation performance, aiding in the selection of effective materials.
|
|||
This CERT defines material and performance specifications for mineral-fiber blanket insulation used in light-frame construction, particularly where moisture and fire resistance are required. ASTM C665 helps ensure insulation provides effective thermal, moisture, and fire-resistant properties.
|
|||
This CERT defines a test method for evaluating the surface burning characteristics of building materials. UL 723 measures flame spread and smoke development, essential for determining the fire safety of materials used in construction, particularly in interior finishes. Compliance with UL 723 helps materials meet building codes and fire safety standards.
|
|||
This CERT outlines a standard test method for assessing the surface burning characteristics of building materials. ASTM E84, also known as the "Steiner Tunnel Test," measures flame spread and smoke development, essential for determining the fire safety of materials used in construction
|
|||
This CERT specifies test methods for measuring the water vapor transmission rate (WVTR) of materials, particularly in building applications where moisture control is critical. ASTM E96 ensures materials have adequate moisture resistance, supporting durability and performance in environments prone to humidity.
|
|||
This CERT specifies a test method for measuring the solar reflectance of clear, high-transmission glass used in buildings. ASTM E970 helps assess the ability of glass materials to control solar heat gain, supporting energy efficiency and thermal comfort in buildings.
|
|||
This CERT verifies the recycled content in products, ensuring that claims about recycled material composition are accurate and credible. SCS Recycled Content Certification supports transparency in sustainability, validating that products contain the stated percentage of post-consumer or pre-consumer recycled materials, in compliance with global standards.
|
Good To Know - Brand Attributes
Enviro
This brand participates in carbon offset programs to neutralize its carbon emissions.
Owens Corning PINK Next Gen™ Fiberglas™ Insulation
Advanced fiber technology delivers improved recovery and stiffness for a faster install. Superior texture with less clumps and chunks for clean cuts with one pass, less dust and a smooth surface that passes inspection. Compression packaging for neater stacks and easier handling.Scored Product Attributes
58
Certifications | |||
---|---|---|---|
This CERT outlines a method to measure the water vapor sorption of insulation materials, helping to ensure thermal efficiency and durability in humid conditions. ASTM C1104 supports quality control for insulation used in various construction and HVAC applications.
|
|||
This CERT verifies that products meet high standards for low chemical emissions, making them suitable for sensitive environments like schools and healthcare facilities by minimizing exposure to pollutants and volatile organic compounds (VOCs).
|
|||
This CERT verifies that products meet energy efficiency standards set by the U.S. Environmental Protection Agency (EPA), reducing energy consumption and environmental impact.
|
|||
This CERT specifies test methods for assessing the adhesive and cohesive strength of sealants used with building materials, especially under varied conditions. ASTM C1304 is essential for ensuring sealants maintain effectiveness and durability when exposed to environmental stresses.
|
|||
This CERT establishes a test method for assessing the resistance of insulation materials to fungal growth, ensuring materials maintain structural integrity and do not promote mold in humid conditions. ASTM C1338 is crucial for applications where moisture exposure is likely.
|
|||
This CERT outlines a test method for measuring the thermal resistance (R-value) and thermal conductivity of insulation materials, critical for energy efficiency in building applications. ASTM C518 provides reliable data on insulation performance, aiding in the selection of effective materials.
|
|||
This CERT defines material and performance specifications for mineral-fiber blanket insulation used in light-frame construction, particularly where moisture and fire resistance are required. ASTM C665 helps ensure insulation provides effective thermal, moisture, and fire-resistant properties.
|
|||
This CERT outlines a standard test method for assessing the surface burning characteristics of building materials. ASTM E84, also known as the "Steiner Tunnel Test," measures flame spread and smoke development, essential for determining the fire safety of materials used in construction
|
|||
This CERT specifies test methods for measuring the water vapor transmission rate (WVTR) of materials, particularly in building applications where moisture control is critical. ASTM E96 ensures materials have adequate moisture resistance, supporting durability and performance in environments prone to humidity.
|
|||
This CERT specifies a test method for measuring the solar reflectance of clear, high-transmission glass used in buildings. ASTM E970 helps assess the ability of glass materials to control solar heat gain, supporting energy efficiency and thermal comfort in buildings.
|
|||
This CERT provides third-party verification for Environmental Product Declarations, ensuring accuracy in reported lifecycle environmental impacts of products. SCS Verified EPDs are based on international standards, promoting transparency and supporting green building programs like LEED by offering reliable environmental data for informed decision-making
|
|||
Warranty: Limited Lifetime |
Good To Know - Brand Attributes
Enviro
This brand participates in carbon offset programs to neutralize its carbon emissions.
Verdant VX4 Smart Thermostat - Energy Management Systems | Verdant
Introducing the new Verdant VX4 thermostat: sleek design meets energy management. Experience ultimate comfort while reducing energy costs.Scored Product Attributes
96
Certifications | |||
---|---|---|---|
This CERT verifies that electronic products comply with the safety and electromagnetic interference standards set by the Federal Communications Commission (FCC) for devices sold in the United States.
|
|||
This CERT verifies that products meet energy efficiency standards set by the U.S. Environmental Protection Agency (EPA), reducing energy consumption and environmental impact.
|
|||
This CERT verifies that products comply with the European Union’s REACH regulation, ensuring they are safe for human health and the environment by controlling harmful chemicals throughout the supply chain.
|
|||
This CERT verifies that electronic and electrical products meet the Restriction of Hazardous Substances (RoHS) standards, ensuring they are free from harmful materials like lead, mercury and cadmium.
|
|||
This CERT marks conformity with European Union (EU) health, safety, and environmental protection standards. The CE (Conformité Européenne) Marking is required for many products to be sold within the European Economic Area (EEA), ensuring they meet EU regulatory requirements.
|
|||
This CERT verifies that electronic products comply with the Waste Electrical and Electronic Equipment (WEEE) Directive, ensuring they are designed for safe disposal, recycling and recovery to minimize environmental impact.
|
|||
Warranty: 1 year |
CertainTeed InsulPure Insulation | CertainTeed
CertainTeed InsulPure®Insulation offers high-performance fiberglass insulation designed to enhance your home's comfort and energy efficiency. Its unique formula surpasses traditional fiberglass insulation, effectively preventing heat loss and gain.Scored Product Attributes
52
Certifications | |||
---|---|---|---|
|
|||
This CERT verifies that products meet high standards for low chemical emissions, making them suitable for sensitive environments like schools and healthcare facilities by minimizing exposure to pollutants and volatile organic compounds (VOCs).
|
|||
This CERT outlines a method to measure the water vapor sorption of insulation materials, helping to ensure thermal efficiency and durability in humid conditions. ASTM C1104 supports quality control for insulation used in various construction and HVAC applications.
|
|||
This CERT defines a test method for evaluating the surface burning characteristics of building materials. UL 723 measures flame spread and smoke development, essential for determining the fire safety of materials used in construction, particularly in interior finishes. Compliance with UL 723 helps materials meet building codes and fire safety standards.
|
|||
This CERT specifies test methods for assessing the adhesive and cohesive strength of sealants used with building materials, especially under varied conditions. ASTM C1304 is essential for ensuring sealants maintain effectiveness and durability when exposed to environmental stresses.
|
|||
This CERT establishes a test method for assessing the resistance of insulation materials to fungal growth, ensuring materials maintain structural integrity and do not promote mold in humid conditions. ASTM C1338 is crucial for applications where moisture exposure is likely.
|
|||
This CERT outlines a test method for measuring the thermal resistance (R-value) and thermal conductivity of insulation materials, critical for energy efficiency in building applications. ASTM C518 provides reliable data on insulation performance, aiding in the selection of effective materials.
|
|||
This CERT defines material requirements for mineral fiber blankets used as thermal insulation in a variety of applications. ASTM C553 ensures these insulation materials meet performance standards for thermal resistance, density, and physical properties, supporting energy efficiency and durability.
|
|||
This CERT defines material and performance specifications for mineral-fiber blanket insulation used in light-frame construction, particularly where moisture and fire resistance are required. ASTM C665 helps ensure insulation provides effective thermal, moisture, and fire-resistant properties.
|
|||
This CERT provides a test method for determining the non-combustibility of building materials. ASTM E136 is essential for ensuring materials will not contribute to fire spread, particularly in applications where fire safety is critical, such as walls, ceilings, and structural components in buildings.
|
|||
This CERT provides a test method for determining the oxidative-induction time (OIT) of materials by differential scanning calorimetry (DSC). ASTM E790 is primarily used to assess the thermal stability of polymers, which is critical in evaluating materials for durability in various industrial and environmental applications.
|
|||
This CERT outlines a standard test method for assessing the surface burning characteristics of building materials. ASTM E84, also known as the "Steiner Tunnel Test," measures flame spread and smoke development, essential for determining the fire safety of materials used in construction
|
|||
Warranty: Limited Lifetime |
Good To Know - Brand Attributes
Enviro
This brand participates in programs that upcycle, repurpose, or utilize deadstock materials to create new products.
This brand participates in carbon offset programs to neutralize its carbon emissions.
This brand supports initiatives to protect water resources and reduce water consumption.
This brand offers recycling services for its purchased products or for products within the same industry.
Outline for reaching near or at carbon zero emissions by 2030
Auralex Mineral Fiber Insulation
$159.99
Shop now launch
View description
Scored Product Attributes
51
Certifications | |||
---|---|---|---|
This CERT outlines a method to measure the water vapor sorption of insulation materials, helping to ensure thermal efficiency and durability in humid conditions. ASTM C1104 supports quality control for insulation used in various construction and HVAC applications.
|
|||
This CERT specifies a test method for measuring the density of insulation materials, critical for assessing thermal performance, durability, and suitability for different building applications. ASTM C303 supports quality assurance in the production and application of insulation.
|
|||
This CERT defines a test method for evaluating the linear shrinkage of thermal insulation materials at elevated temperatures. ASTM C356 ensures that insulation materials maintain dimensional stability, which is critical for thermal performance in high-temperature applications.
|
|||
This CERT defines a test method for assessing the hot-surface performance of thermal insulation materials. ASTM C411 ensures insulation can withstand continuous high-temperature exposure without deterioration, critical for applications involving heated equipment or surfaces.
|
|||
This CERT outlines a test method for measuring the thermal resistance (R-value) and thermal conductivity of insulation materials, critical for energy efficiency in building applications. ASTM C518 provides reliable data on insulation performance, aiding in the selection of effective materials.
|
|||
This CERT specifies requirements for mineral fiber board insulation intended for thermal and acoustical applications in buildings. ASTM C612 ensures these insulation products meet performance criteria for density, thermal resistance, and structural stability, supporting energy efficiency and sound control.
|
|||
This CERT provides a standardized test method for measuring the compressive properties of thermal insulations, ensuring accurate assessment of their behavior under load in construction applications.
|
|||
This CERT defines material and performance specifications for mineral-fiber blanket insulation used in light-frame construction, particularly where moisture and fire resistance are required. ASTM C665 helps ensure insulation provides effective thermal, moisture, and fire-resistant properties.
|
|||
This CERT specifies requirements for insulation materials intended for use in contact with austenitic stainless steel to minimize the risk of corrosion. ASTM C795 ensures that insulation materials are compatible with stainless steel, particularly in high-temperature applications, and prevents chloride-induced corrosion.
|
|||
This CERT outlines a standardized test method for measuring the steady-state heat flux and thermal transmission properties of flat, homogeneous materials using the guarded-hot-plate apparatus. This method is essential for determining the thermal conductivity and resistance of insulation materials and other construction products.
|
|||
This CERT provides a test method for determining the non-combustibility of building materials. ASTM E136 is essential for ensuring materials will not contribute to fire spread, particularly in applications where fire safety is critical, such as walls, ceilings, and structural components in buildings.
|
|||
This CERT outlines a standard test method for assessing the surface burning characteristics of building materials. ASTM E84, also known as the "Steiner Tunnel Test," measures flame spread and smoke development, essential for determining the fire safety of materials used in construction
|
|||
This CERT defines a test method for evaluating the surface burning characteristics of building materials. UL 723 measures flame spread and smoke development, essential for determining the fire safety of materials used in construction, particularly in interior finishes. Compliance with UL 723 helps materials meet building codes and fire safety standards.
|
|||
This CERT outlines laboratory procedures to evaluate whether thermal insulation materials contribute to external stress corrosion cracking (ESCC) of austenitic stainless steel due to soluble chlorides within the insulation.
|
|||
Warranty: 45 - 90 Day |
Good To Know - Brand Attributes
Origins
Made in United States of America
ROCKWOOL Safe'n'Sound Sound Proof Insulation | ROCKWOOL
$79.98
Shop now launch
View description
Scored Product Attributes
49
Certifications | |||
---|---|---|---|
This CERT verifies that products meet high standards for low chemical emissions, making them suitable for sensitive environments like schools and healthcare facilities by minimizing exposure to pollutants and volatile organic compounds (VOCs).
|
|||
This CERT verifies that products meet rigorous safety and performance standards set by UL, ensuring they have been tested and approved for use in specific environments, such as electrical systems and appliances.
|
|||
This CERT specifies test methods for measuring the thickness and density of blanket or batt thermal insulation. ASTM C167 ensures accurate material specifications, critical for insulation effectiveness and energy efficiency in building applications.
|
|||
This CERT specifies a test method for measuring the sound absorption of materials, particularly in acoustic applications. ASTM C423 is essential for evaluating materials used in soundproofing and noise control, providing reliable data on acoustic performance for building and industrial environments.
|
|||
This CERT defines material and performance specifications for mineral-fiber blanket insulation used in light-frame construction, particularly where moisture and fire resistance are required. ASTM C665 helps ensure insulation provides effective thermal, moisture, and fire-resistant properties.
|
|||
This CERT provides a test method for determining the non-combustibility of building materials. ASTM E136 is essential for ensuring materials will not contribute to fire spread, particularly in applications where fire safety is critical, such as walls, ceilings, and structural components in buildings.
|
|||
This CERT outlines a standard test method for assessing the surface burning characteristics of building materials. ASTM E84, also known as the "Steiner Tunnel Test," measures flame spread and smoke development, essential for determining the fire safety of materials used in construction
|
|||
This CERT outlines test methods for determining the non-combustibility of building materials. CAN/ULC S114 assesses whether materials contribute to fire spread, a critical standard in Canada for materials used in fire-resistant construction, ensuring they do not ignite or support combustion under standard testing conditions.
|
|||
This CERT provides a standardized method for testing and classifying insulation materials based on their smolder resistance. CAN/ULC S129 assesses the smoldering characteristics of loose-fill insulation, ensuring that products reduce the risk of fire spread when exposed to smoldering combustion sources, such as electrical faults or embers.
|
|||
This CERT specifies material requirements for thermal insulation, specifically mineral fiber insulation boards, intended for use in buildings. CAN/ULC S702 covers performance metrics such as thermal resistance, compressive strength, and dimensional stability, ensuring insulation products meet quality and safety standards for energy efficiency in Canadian construction.
|
|||
Warranty: 1 - 19 Day |
Good To Know - Brand Attributes
Social
Company participates in community outreach or activism programs.
This brand supports Diversity, Equity, and Inclusion (DEI) initiatives, promoting a diverse and inclusive workplace and community.
Enviro
This brand participates in carbon offset programs to neutralize its carbon emissions.
This brand supports initiatives to protect water resources and reduce water consumption.
Johns Manville CladStone Water & Fire Block
Johns Manville CladStone™ Water & Fire Block insulation is manufactured from inorganic fibers derived from volcanic rock. Advanced manufacturing technology ensures consistent product quality, with high-fiber density and low shot content for excellent performance.Scored Product Attributes
49
Certifications | |||
---|---|---|---|
This CERT defines a test method for evaluating the linear shrinkage of thermal insulation materials at elevated temperatures. ASTM C356 ensures that insulation materials maintain dimensional stability, which is critical for thermal performance in high-temperature applications.
|
|||
This CERT verifies that products meet strict standards for low chemical emissions, contributing to healthier indoor air quality by reducing exposure to pollutants and volatile organic compounds (VOCs).
|
|||
This CERT outlines a method to measure the water vapor sorption of insulation materials, helping to ensure thermal efficiency and durability in humid conditions. ASTM C1104 supports quality control for insulation used in various construction and HVAC applications.
|
|||
This CERT specifies test methods for assessing the adhesive and cohesive strength of sealants used with building materials, especially under varied conditions. ASTM C1304 is essential for ensuring sealants maintain effectiveness and durability when exposed to environmental stresses.
|
|||
This CERT establishes a test method for assessing the resistance of insulation materials to fungal growth, ensuring materials maintain structural integrity and do not promote mold in humid conditions. ASTM C1338 is crucial for applications where moisture exposure is likely.
|
|||
This CERT outlines a test method for measuring the thermal resistance (R-value) and thermal conductivity of insulation materials, critical for energy efficiency in building applications. ASTM C518 provides reliable data on insulation performance, aiding in the selection of effective materials.
|
|||
This CERT specifies requirements for mineral fiber board insulation intended for thermal and acoustical applications in buildings. ASTM C612 ensures these insulation products meet performance criteria for density, thermal resistance, and structural stability, supporting energy efficiency and sound control.
|
|||
This CERT defines material and performance specifications for mineral-fiber blanket insulation used in light-frame construction, particularly where moisture and fire resistance are required. ASTM C665 helps ensure insulation provides effective thermal, moisture, and fire-resistant properties.
|
|||
This CERT provides a test method for determining the non-combustibility of building materials. ASTM E136 is essential for ensuring materials will not contribute to fire spread, particularly in applications where fire safety is critical, such as walls, ceilings, and structural components in buildings.
|
|||
This CERT outlines test methods for determining the non-combustibility of building materials. CAN/ULC S114 assesses whether materials contribute to fire spread, a critical standard in Canada for materials used in fire-resistant construction, ensuring they do not ignite or support combustion under standard testing conditions.
|
|||
This CERT outlines a standard test method for assessing the surface burning characteristics of building materials. ASTM E84, also known as the "Steiner Tunnel Test," measures flame spread and smoke development, essential for determining the fire safety of materials used in construction
|
|||
This CERT specifies test methods for measuring the water vapor transmission rate (WVTR) of materials, particularly in building applications where moisture control is critical. ASTM E96 ensures materials have adequate moisture resistance, supporting durability and performance in environments prone to humidity.
|
|||
Warranty: 1 - 19 Day |
Insulfoam R-TECH Insulation Panels | Rigid Foam Panels | Insulfoam
R-TECH Insulation Panels are environmentally friendly, achieve enhanced R--values and are typically less expensive than other comparable insulation products.Scored Product Attributes
42
Materials | |||
---|---|---|---|
Dye Free |
Certifications | |||
---|---|---|---|
This CERT verifies that products meet energy efficiency standards set by the U.S. Environmental Protection Agency (EPA), reducing energy consumption and environmental impact.
|
|||
|
|||
This CERT defines test methods for evaluating the flexural properties of thermal insulation materials. ASTM C203 is used to measure strength, flexibility, and durability, helping ensure insulation can withstand mechanical stress in construction applications.
|
|||
This CERT defines test methods for determining the water absorption of rigid cellular insulation materials, ensuring they resist moisture and maintain thermal performance. ASTM C272 supports durability and efficiency in insulation applications exposed to moisture.
|
|||
This CERT outlines a test method for measuring the thermal resistance (R-value) and thermal conductivity of insulation materials, critical for energy efficiency in building applications. ASTM C518 provides reliable data on insulation performance, aiding in the selection of effective materials.
|
|||
This CERT outlines specifications for rigid, cellular polystyrene thermal insulation used in construction applications. ASTM C578 ensures insulation products meet criteria for thermal resistance, compressive strength, and moisture resistance, supporting energy efficiency and durability in buildings.
|
|||
This CERT specifies test methods for determining the compressive properties of rigid cellular materials, such as foams. ASTM D1621 helps ensure these materials meet structural requirements, providing reliable data on compressive strength and behavior under loads, essential for construction and industrial applications.
|
|||
This CERT outlines a standard test method for assessing the surface burning characteristics of building materials. ASTM E84, also known as the "Steiner Tunnel Test," measures flame spread and smoke development, essential for determining the fire safety of materials used in construction
|
|||
This CERT specifies test methods for measuring the water vapor transmission rate (WVTR) of materials, particularly in building applications where moisture control is critical. ASTM E96 ensures materials have adequate moisture resistance, supporting durability and performance in environments prone to humidity.
|
|||
Warranty: Over 14 - 20 Year |
Johns Manville FESCO Board
JM FESCO Board is a protective perlite-based cover board or low-thermal insulation board proven to reduce blistering in hot-asphalt applications.Scored Product Attributes
36
Materials | |||
---|---|---|---|
Recycled Content |
Certifications | |||
---|---|---|---|
This CERT verifies that products meet rigorous safety and performance standards set by UL, ensuring they have been tested and approved for use in specific environments, such as electrical systems and appliances.
|
|||
This CERT defines test methods for evaluating the flexural properties of thermal insulation materials. ASTM C203 is used to measure strength, flexibility, and durability, helping ensure insulation can withstand mechanical stress in construction applications.
|
|||
This CERT outlines a standard test method for assessing the surface burning characteristics of building materials. ASTM E84, also known as the "Steiner Tunnel Test," measures flame spread and smoke development, essential for determining the fire safety of materials used in construction
|
|||
This CERT provides a standardized test method for measuring the compressive properties of thermal insulations, ensuring accurate assessment of their behavior under load in construction applications.
|
|||
This CERT outlines test methods for assessing mechanical, physical, thermal, and water-related properties of cellulosic fiber insulating board, ensuring its suitability for construction use.
|
|||
This CERT specifies the composition and physical properties for perlite thermal insulation board, primarily used above structural roof decks and as a base for built-up, modified, and elastomeric membrane roofing in building construction.
|
|||
This CERT validates the percentage of recycled content in products and materials, ensuring transparency and compliance with industry-recognized sustainability standards.
|
Johns Manville DuraBoard
DuraBoard uses expanded perlite and reinforcing cellulosic fibers to provide excellent insulation with a stable R-value, fire resistance, and a high recycled content. It is used in multi-ply systems and can be installed in a number of ways.Scored Product Attributes
36
Materials | |||
---|---|---|---|
Recycled Content |
Certifications | |||
---|---|---|---|
This CERT verifies that products meet rigorous safety and performance standards set by UL, ensuring they have been tested and approved for use in specific environments, such as electrical systems and appliances.
|
|||
This CERT defines test methods for evaluating the flexural properties of thermal insulation materials. ASTM C203 is used to measure strength, flexibility, and durability, helping ensure insulation can withstand mechanical stress in construction applications.
|
|||
This CERT outlines a standard test method for assessing the surface burning characteristics of building materials. ASTM E84, also known as the "Steiner Tunnel Test," measures flame spread and smoke development, essential for determining the fire safety of materials used in construction
|
|||
This CERT provides a standardized test method for measuring the compressive properties of thermal insulations, ensuring accurate assessment of their behavior under load in construction applications.
|
|||
This CERT outlines test methods for assessing mechanical, physical, thermal, and water-related properties of cellulosic fiber insulating board, ensuring its suitability for construction use.
|
|||
This CERT specifies the composition and physical properties for perlite thermal insulation board, primarily used above structural roof decks and as a base for built-up, modified, and elastomeric membrane roofing in building construction.
|
|||
This CERT validates the percentage of recycled content in products and materials, ensuring transparency and compliance with industry-recognized sustainability standards.
|
Johns Manville Sound & Fire Block
Johns Manville Sound & Fire Block® mineral wool batts are noncombustible and moisture-resistant. The high-density fibers in mineral wool help delay the spread of fire and reduce noise transfer in interior walls and between ceilings and floors.Scored Product Attributes
35
Certifications | |||
---|---|---|---|
This CERT verifies that products meet strict standards for low chemical emissions, contributing to healthier indoor air quality by reducing exposure to pollutants and volatile organic compounds (VOCs).
|
|||
This CERT outlines a method to measure the water vapor sorption of insulation materials, helping to ensure thermal efficiency and durability in humid conditions. ASTM C1104 supports quality control for insulation used in various construction and HVAC applications.
|
|||
This CERT specifies test methods for assessing the adhesive and cohesive strength of sealants used with building materials, especially under varied conditions. ASTM C1304 is essential for ensuring sealants maintain effectiveness and durability when exposed to environmental stresses.
|
|||
This CERT establishes a test method for assessing the resistance of insulation materials to fungal growth, ensuring materials maintain structural integrity and do not promote mold in humid conditions. ASTM C1338 is crucial for applications where moisture exposure is likely.
|
|||
This CERT defines material and performance specifications for mineral-fiber blanket insulation used in light-frame construction, particularly where moisture and fire resistance are required. ASTM C665 helps ensure insulation provides effective thermal, moisture, and fire-resistant properties.
|
|||
This CERT provides a test method for determining the non-combustibility of building materials. ASTM E136 is essential for ensuring materials will not contribute to fire spread, particularly in applications where fire safety is critical, such as walls, ceilings, and structural components in buildings.
|
|||
This CERT outlines a standard test method for assessing the surface burning characteristics of building materials. ASTM E84, also known as the "Steiner Tunnel Test," measures flame spread and smoke development, essential for determining the fire safety of materials used in construction
|
|||
This CERT specifies a test method for measuring the solar reflectance of clear, high-transmission glass used in buildings. ASTM E970 helps assess the ability of glass materials to control solar heat gain, supporting energy efficiency and thermal comfort in buildings.
|
|||
Warranty: 1 - 19 Day |
Owens Corning Thermafiber® SAFB™ (Sound Attenuation Fire Blanket)
Thermafiber SAFB (Sound Attenuation Fire Blankets) are mineral wool batts that provide sound control and fire protection in wall and floor-ceiling assembliesScored Product Attributes
35
Materials | |||
---|---|---|---|
Recycled Content |
Certifications | |||
---|---|---|---|
This CERT verifies that products meet rigorous safety and performance standards set by UL, ensuring they have been tested and approved for use in specific environments, such as electrical systems and appliances.
|
|||
This CERT outlines a method to measure the water vapor sorption of insulation materials, helping to ensure thermal efficiency and durability in humid conditions. ASTM C1104 supports quality control for insulation used in various construction and HVAC applications.
|
|||
This CERT defines material and performance specifications for mineral-fiber blanket insulation used in light-frame construction, particularly where moisture and fire resistance are required. ASTM C665 helps ensure insulation provides effective thermal, moisture, and fire-resistant properties.
|
|||
This CERT provides a test method for determining the non-combustibility of building materials. ASTM E136 is essential for ensuring materials will not contribute to fire spread, particularly in applications where fire safety is critical, such as walls, ceilings, and structural components in buildings.
|
|||
This CERT outlines a standard test method for assessing the surface burning characteristics of building materials. ASTM E84, also known as the "Steiner Tunnel Test," measures flame spread and smoke development, essential for determining the fire safety of materials used in construction
|
|||
This CERT provides a standardized method for assessing the surface burning characteristics of building materials and assemblies in Canada. CAN/ULC S102 evaluates flame spread and smoke development, essential for determining fire safety and compliance with Canadian building codes.
|
|||
This CERT outlines test methods for determining the non-combustibility of building materials. CAN/ULC S114 assesses whether materials contribute to fire spread, a critical standard in Canada for materials used in fire-resistant construction, ensuring they do not ignite or support combustion under standard testing conditions.
|
|||
This CERT is a sustainability certification for building materials and products, verifying compliance with environmental standards. ICC-ES SAVE assesses materials for attributes such as recycled content, VOC emissions, and energy efficiency, supporting sustainable construction practices and enhancing environmental performance in line with green building standards.
|
|||
This CERT provides third-party-verified environmental data on products, based on lifecycle assessment (LCA) in compliance with ISO standards. UL Environmental Product Declaration (EPD) promotes transparency in environmental impact, supporting informed decisions in sustainable design and construction by detailing a product’s environmental footprint.
|
|||
Warranty: 3-year limited warranty |
Good To Know - Brand Attributes
Enviro
This brand participates in carbon offset programs to neutralize its carbon emissions.
Origins
Made in United States of America
Owens Corning THERMAL COMFORT & SOUND CONTROL
Thermafiber Fire & Sound Guard Plus is the first hybrid mineral wool insulation batt that offers thermal performance, noise control and fire resistance for both interior and exterior walls, floors and ceilings for residential and light commercial construction applications.Scored Product Attributes
34
Materials | |||
---|---|---|---|
Recycled Content |
Certifications | |||
---|---|---|---|
This CERT outlines a method to measure the water vapor sorption of insulation materials, helping to ensure thermal efficiency and durability in humid conditions. ASTM C1104 supports quality control for insulation used in various construction and HVAC applications.
|
|||
This CERT establishes a test method for assessing the resistance of insulation materials to fungal growth, ensuring materials maintain structural integrity and do not promote mold in humid conditions. ASTM C1338 is crucial for applications where moisture exposure is likely.
|
|||
This CERT defines material and performance specifications for mineral-fiber blanket insulation used in light-frame construction, particularly where moisture and fire resistance are required. ASTM C665 helps ensure insulation provides effective thermal, moisture, and fire-resistant properties.
|
|||
This CERT provides a test method for determining the non-combustibility of building materials. ASTM E136 is essential for ensuring materials will not contribute to fire spread, particularly in applications where fire safety is critical, such as walls, ceilings, and structural components in buildings.
|
|||
This CERT outlines a standard test method for assessing the surface burning characteristics of building materials. ASTM E84, also known as the "Steiner Tunnel Test," measures flame spread and smoke development, essential for determining the fire safety of materials used in construction
|
|||
This CERT specifies test methods for measuring the water vapor transmission rate (WVTR) of materials, particularly in building applications where moisture control is critical. ASTM E96 ensures materials have adequate moisture resistance, supporting durability and performance in environments prone to humidity.
|
|||
This CERT provides a standardized method for assessing the surface burning characteristics of building materials and assemblies in Canada. CAN/ULC S102 evaluates flame spread and smoke development, essential for determining fire safety and compliance with Canadian building codes.
|
|||
This CERT outlines test methods for determining the non-combustibility of building materials. CAN/ULC S114 assesses whether materials contribute to fire spread, a critical standard in Canada for materials used in fire-resistant construction, ensuring they do not ignite or support combustion under standard testing conditions.
|
|||
This CERT is a sustainability certification for building materials and products, verifying compliance with environmental standards. ICC-ES SAVE assesses materials for attributes such as recycled content, VOC emissions, and energy efficiency, supporting sustainable construction practices and enhancing environmental performance in line with green building standards.
|
|||
This CERT provides third-party-verified environmental data on products, based on lifecycle assessment (LCA) in compliance with ISO standards. UL Environmental Product Declaration (EPD) promotes transparency in environmental impact, supporting informed decisions in sustainable design and construction by detailing a product’s environmental footprint.
|
|||
Warranty: 3-year limited warranty |
Good To Know - Brand Attributes
Enviro
This brand participates in carbon offset programs to neutralize its carbon emissions.
Origins
Made in United States of America
ROCKWOOL Comfortbatt semi-rigid batt insulation for thermal resistance in wood and steel framing | ROCKWOOL
ROCKWOOL Comfortbatt is a stone wool insulation product for use in both new residential construction and renovations. unique, flexible edge helps maintain R-values.Scored Product Attributes
32
Certifications | |||
---|---|---|---|
This CERT verifies that products meet high standards for low chemical emissions, making them suitable for sensitive environments like schools and healthcare facilities by minimizing exposure to pollutants and volatile organic compounds (VOCs).
|
|||
This CERT specifies test methods for measuring the thickness and density of blanket or batt thermal insulation. ASTM C167 ensures accurate material specifications, critical for insulation effectiveness and energy efficiency in building applications.
|
|||
This CERT outlines a test method for measuring the thermal resistance (R-value) and thermal conductivity of insulation materials, critical for energy efficiency in building applications. ASTM C518 provides reliable data on insulation performance, aiding in the selection of effective materials.
|
|||
This CERT defines material and performance specifications for mineral-fiber blanket insulation used in light-frame construction, particularly where moisture and fire resistance are required. ASTM C665 helps ensure insulation provides effective thermal, moisture, and fire-resistant properties.
|
|||
This CERT provides a test method for determining the non-combustibility of building materials. ASTM E136 is essential for ensuring materials will not contribute to fire spread, particularly in applications where fire safety is critical, such as walls, ceilings, and structural components in buildings.
|
|||
This CERT outlines a standard test method for assessing the surface burning characteristics of building materials. ASTM E84, also known as the "Steiner Tunnel Test," measures flame spread and smoke development, essential for determining the fire safety of materials used in construction
|
|||
Warranty: 1 - 19 Day |
Good To Know - Brand Attributes
Social
Company participates in community outreach or activism programs.
This brand supports Diversity, Equity, and Inclusion (DEI) initiatives, promoting a diverse and inclusive workplace and community.
Enviro
This brand participates in carbon offset programs to neutralize its carbon emissions.
This brand supports initiatives to protect water resources and reduce water consumption.
Insulfoam Insulfoam Unfaced Foam | Unfaced Polystyrene Insulation
Insulfoam Unfaced Foam has the highest R-Value per dollar over any other rigid insulation. The unfaced expanded polystyrene fits a variety of wall applications.Scored Product Attributes
24
Certifications | |||
---|---|---|---|
|
|||
This CERT outlines a test method for measuring the thermal resistance (R-value) and thermal conductivity of insulation materials, critical for energy efficiency in building applications. ASTM C518 provides reliable data on insulation performance, aiding in the selection of effective materials.
|
|||
This CERT outlines specifications for rigid, cellular polystyrene thermal insulation used in construction applications. ASTM C578 ensures insulation products meet criteria for thermal resistance, compressive strength, and moisture resistance, supporting energy efficiency and durability in buildings.
|
|||
This CERT specifies test methods for determining the compressive properties of rigid cellular materials, such as foams. ASTM D1621 helps ensure these materials meet structural requirements, providing reliable data on compressive strength and behavior under loads, essential for construction and industrial applications.
|
|||
This CERT outlines a standard test method for assessing the surface burning characteristics of building materials. ASTM E84, also known as the "Steiner Tunnel Test," measures flame spread and smoke development, essential for determining the fire safety of materials used in construction
|
|||
Warranty: Over 14 - 20 Year |
Nu-Wool Nu-Wool's Energy Saving Premium Cellulose Insulation
Experience ultimate comfort & savings with Nu-Wool's Premium Cellulose Insulation; a highly effective, eco-friendly insulation made from 86% recycled paper.Scored Product Attributes
21
Materials | |||
---|---|---|---|
Post Consumer Reycled Paper |
Certifications | |||
---|---|---|---|
This CERT verifies that products meet rigorous safety and performance standards set by UL, ensuring they have been tested and approved for use in specific environments, such as electrical systems and appliances.
|
|||
This CERT evaluates the fire-resistance of building materials and assemblies, ensuring they can withstand high temperatures and prevent structural failure during fires. ANSI/UL 263 is widely used in construction to verify fire safety in various structural elements.
|
|||
This CERT provides test methods for evaluating the fire-resistance of building materials and assemblies, assessing their ability to contain fire and withstand high temperatures. ASTM E119 is critical for ensuring the safety of structural components in buildings, particularly in fire-rated construction.
|
|||
Warranty: Over 7 - 10 Year |
Good To Know - Brand Attributes
Enviro
This brand calculates the carbon footprint of its products, measuring the total greenhouse gas emissions produced throughout the product's lifecycle.
This brand offers recycling services for its purchased products or for products within the same industry.
Governance
- Brand must describe itself in some way or form as family owned. Do not assume
ecobee Smart Thermostat Premium | ecobee
$249.99
Shop now launch
View description
Scored Product Attributes
34
Materials | |||
---|---|---|---|
PVC Free |
|||
Mercury Free |
|||
Arsenic Free |
|||
Recycled Primary Packaging |
Certifications | |||
---|---|---|---|
This CERT verifies that products meet energy efficiency standards set by the U.S. Environmental Protection Agency (EPA), reducing energy consumption and environmental impact.
|
|||
This CERT verifies that electronic and electrical products meet the Restriction of Hazardous Substances (RoHS) standards, ensuring they are free from harmful materials like lead, mercury and cadmium.
|
|||
Warranty: 3-year limited warranty |
ecobee Smart Thermostat Enhanced | ecobee
$189.99
Shop now launch
View description
Scored Product Attributes
34
Materials | |||
---|---|---|---|
PVC Free |
|||
Mercury Free |
|||
Arsenic Free |
|||
Recycled Primary Packaging |
Certifications | |||
---|---|---|---|
This CERT verifies that products meet energy efficiency standards set by the U.S. Environmental Protection Agency (EPA), reducing energy consumption and environmental impact.
|
|||
This CERT verifies that electronic and electrical products meet the Restriction of Hazardous Substances (RoHS) standards, ensuring they are free from harmful materials like lead, mercury and cadmium.
|
|||
Warranty: 3-year limited warranty |
ecobee Wi-Fi smart thermostat | ecobee
$149.99
Shop now launch
View description
Scored Product Attributes
34
Materials | |||
---|---|---|---|
PVC Free |
|||
Mercury Free |
|||
Arsenic Free |
|||
Recycled Primary Packaging |
Certifications | |||
---|---|---|---|
This CERT verifies that products meet energy efficiency standards set by the U.S. Environmental Protection Agency (EPA), reducing energy consumption and environmental impact.
|
|||
This CERT verifies that electronic and electrical products meet the Restriction of Hazardous Substances (RoHS) standards, ensuring they are free from harmful materials like lead, mercury and cadmium.
|
|||
Warranty: 3-year limited warranty |
Superglass Timber & Rafter Roll 32 - Superglass Insulation Ltd
Superglass Timber & Rafter Roll 32 is a non-combustible glass mineral wool insulation roll. For use in timber frame walls, roofs & floors.Scored Product Attributes
19
Materials | |||
---|---|---|---|
Recycled Glass |
Certifications | |||
---|---|---|---|
This CERT marks conformity with European Union (EU) health, safety, and environmental protection standards. The CE (Conformité Européenne) Marking is required for many products to be sold within the European Economic Area (EEA), ensuring they meet EU regulatory requirements.
|
|||
This CERT provides third-party verification of Environmental Product Declarations (EPDs) for construction products, aligning with ISO 14025 and EN 15804 standards. BRE Global Verified EPD assesses the environmental impact of products over their lifecycle, helping architects, builders, and regulators make sustainable choices in building materials.
|
|||
This CERT specifies requirements for factory-made mineral wool products used in building insulation. BS EN 13162:2012 defines performance criteria, including thermal resistance, mechanical strength, and moisture behavior, to ensure reliability and energy efficiency in construction applications
|
|||
This CERT outlines procedures for factory production control (FPC) of thermal insulation products. BS EN 13172:2012 ensures that manufacturers maintain consistent quality across production batches by defining FPC standards, helping to guarantee that insulation materials meet regulatory and performance requirements.
|
Good To Know - Brand Attributes
Social
Company participates in community outreach or activism programs.
Quality
This brand or its factories are ISO 9001 certified, demonstrating its commitment to quality management standards.
This brand is ISO 14001 certified, ensuring it follows international standards for effective environmental management systems
Origins
Made in United Kingdom of Great Britain and Northern Ireland
Superglass Timber & Rafter Batt 32 - Superglass Insulation Ltd
Superglass Timber & Rafter Batt 32 is a non-combustible glass mineral wool insulation batt. For use in timber frame walls, roofs & floors.Scored Product Attributes
19
Materials | |||
---|---|---|---|
Recycled Glass |
Certifications | |||
---|---|---|---|
This CERT marks conformity with European Union (EU) health, safety, and environmental protection standards. The CE (Conformité Européenne) Marking is required for many products to be sold within the European Economic Area (EEA), ensuring they meet EU regulatory requirements.
|
|||
This CERT provides third-party verification of Environmental Product Declarations (EPDs) for construction products, aligning with ISO 14025 and EN 15804 standards. BRE Global Verified EPD assesses the environmental impact of products over their lifecycle, helping architects, builders, and regulators make sustainable choices in building materials.
|
|||
This CERT specifies requirements for factory-made mineral wool products used in building insulation. BS EN 13162:2012 defines performance criteria, including thermal resistance, mechanical strength, and moisture behavior, to ensure reliability and energy efficiency in construction applications
|
|||
This CERT outlines procedures for factory production control (FPC) of thermal insulation products. BS EN 13172:2012 ensures that manufacturers maintain consistent quality across production batches by defining FPC standards, helping to guarantee that insulation materials meet regulatory and performance requirements.
|
Good To Know - Brand Attributes
Social
Company participates in community outreach or activism programs.
Quality
This brand or its factories are ISO 9001 certified, demonstrating its commitment to quality management standards.
This brand is ISO 14001 certified, ensuring it follows international standards for effective environmental management systems
Superglass Timber & Rafter Roll 40 - Superglass Insulation Ltd
Superglass Timber & Rafter Roll 40 is a non-combustible glass mineral wool insulation roll. For use in timber frame walls, roofs & floors.Scored Product Attributes
19
Materials | |||
---|---|---|---|
Recycled Glass |
Certifications | |||
---|---|---|---|
This CERT marks conformity with European Union (EU) health, safety, and environmental protection standards. The CE (Conformité Européenne) Marking is required for many products to be sold within the European Economic Area (EEA), ensuring they meet EU regulatory requirements.
|
|||
This CERT provides third-party verification of Environmental Product Declarations (EPDs) for construction products, aligning with ISO 14025 and EN 15804 standards. BRE Global Verified EPD assesses the environmental impact of products over their lifecycle, helping architects, builders, and regulators make sustainable choices in building materials.
|
|||
This CERT specifies requirements for factory-made mineral wool products used in building insulation. BS EN 13162:2012 defines performance criteria, including thermal resistance, mechanical strength, and moisture behavior, to ensure reliability and energy efficiency in construction applications
|
|||
This CERT outlines procedures for factory production control (FPC) of thermal insulation products. BS EN 13172:2012 ensures that manufacturers maintain consistent quality across production batches by defining FPC standards, helping to guarantee that insulation materials meet regulatory and performance requirements.
|
Good To Know - Brand Attributes
Social
Company participates in community outreach or activism programs.
Quality
This brand or its factories are ISO 9001 certified, demonstrating its commitment to quality management standards.
This brand is ISO 14001 certified, ensuring it follows international standards for effective environmental management systems
Amazon Amazon Smart Thermostat
$79.98
Shop now launch
View description
Scored Product Attributes
33
Certifications | |||
---|---|---|---|
This CERT verifies that products meet energy efficiency standards set by the U.S. Environmental Protection Agency (EPA), reducing energy consumption and environmental impact.
|
|||
This CERT verifies that products meet strict environmental standards across their lifecycle, including sustainable sourcing, reduced energy use and minimized waste.
|
|||
Warranty: 1 year |
Greenfiber AgriTherm All Borate-Treated Blow-In Insulation | Greenfiber
AgriTherm All Borate-Treated Blown-In Insulation is designed specifically for agricultural structures. It's non-corrosive, so it's perfect for metal buildings.Scored Product Attributes
12
Certifications | |||
---|---|---|---|
This CERT verifies that products meet energy efficiency standards set by the U.S. Environmental Protection Agency (EPA), reducing energy consumption and environmental impact.
|
|||
Warranty: Limited Lifetime |
Good To Know - Brand Attributes
Enviro
This brand participates in carbon offset programs to neutralize its carbon emissions.
Origins
Made in United States of America
Insulfoam Geofoam for Structural Insulation | Insulfoam
InsulFoam GF (EPS Geofoam) is a versatile structural insulation for lightweight void fill applications including slope stabilization, lightweight roads and more.Scored Product Attributes
11
Materials | |||
---|---|---|---|
Formaldehyde Free |
Certifications | |||
---|---|---|---|
|
|||
This CERT specifies material requirements for rigid cellular polystyrene (RCPS) geofoam used in geotechnical and construction applications, defining performance metrics like compressive strength and density. ASTM D6817 ensures geofoam stability, supporting structural integrity and durability in load-bearing applications.
|
|||
Warranty: Over 14 - 20 Year |
Lennox icomfort M30
The Lennox M30 smart thermostats innovative features make it the simple, stylish and smart thermostat you can trust to keep your home comfortable all year.Scored Product Attributes
19
Certifications | |||
---|---|---|---|
This CERT verifies that products meet energy efficiency standards set by the U.S. Environmental Protection Agency (EPA), reducing energy consumption and environmental impact.
|
|||
Warranty: Over 3-5 Year |
Wyze Wyze Thermostat | Programmable, Wireless Smart Home Digital Thermostat
$79.98
Shop now launch
View description
Scored Product Attributes
17
Materials | |||
---|---|---|---|
PVC Free |
|||
ABS Plastic |
|||
Mercury Free |
|||
Arsenic Free |
|||
Recyclable Primary Packaging |
Certifications | |||
---|---|---|---|
This CERT verifies that electronic products comply with the safety and electromagnetic interference standards set by the Federal Communications Commission (FCC) for devices sold in the United States.
|
|||
Warranty: 1 year |
Sensi Sensi Lite Smart Thermostat
$89.99
Shop now launch
View description
Scored Product Attributes
14
Certifications | |||
---|---|---|---|
This CERT verifies that products meet energy efficiency standards set by the U.S. Environmental Protection Agency (EPA), reducing energy consumption and environmental impact.
|
|||
Warranty: 3-year limited warranty |
Sensi Sensi Touch 2 Smart Thermostat
$209.99
Shop now launch
View description
Scored Product Attributes
14
Certifications | |||
---|---|---|---|
This CERT verifies that products meet energy efficiency standards set by the U.S. Environmental Protection Agency (EPA), reducing energy consumption and environmental impact.
|
|||
Warranty: 3-year limited warranty |
Sensi ST55, Sensi Smart Thermostat
$129.00
Shop now launch
View description
Scored Product Attributes
14
Certifications | |||
---|---|---|---|
This CERT verifies that products meet energy efficiency standards set by the U.S. Environmental Protection Agency (EPA), reducing energy consumption and environmental impact.
|
|||
Warranty: 3-year limited warranty |
Mysa Smart Thermostats Mysa Smart Thermostat for Electric In-Floor Heating
$199.00
Shop now launch
View description
Scored Product Attributes
12
Certifications | |||
---|---|---|---|
This CERT establishes safety standards for ground-fault circuit interrupters (GFCIs), ensuring they protect users from electric shock by detecting and interrupting ground-fault currents in residential, commercial, and industrial applications.
|
|||
Warranty: Over 1 - 2 Year |
Tiger Foam Tiger Foam | Spray Foam Insulation Kit | TF-600FR
$785.00
Shop now launch
View description
Scored Product Attributes
6
Materials | |||
---|---|---|---|
VOC Free |
Certifications | |||
---|---|---|---|
This CERT outlines a standard test method for assessing the surface burning characteristics of building materials. ASTM E84, also known as the "Steiner Tunnel Test," measures flame spread and smoke development, essential for determining the fire safety of materials used in construction
|
|||
This CERT is issued by the Canadian Construction Materials Centre (CCMC) to verify that construction materials and systems meet Canada's National Building Code requirements. CCMC Certification assesses various performance criteria, including durability, safety, and compliance, providing regulatory acceptance for building products used in Canada.
|
Good To Know - Brand Attributes
Governance
This brand is veteran-owned, meaning it is owned and operated by military veterans.
Origins
Made in United States of America
Tiger Foam Tiger Foam | Spray Foam Insulation Kit | TF-200FR
$365.00
Shop now launch
View description
Scored Product Attributes
6
Materials | |||
---|---|---|---|
VOC Free |
Certifications | |||
---|---|---|---|
This CERT outlines a standard test method for assessing the surface burning characteristics of building materials. ASTM E84, also known as the "Steiner Tunnel Test," measures flame spread and smoke development, essential for determining the fire safety of materials used in construction
|
|||
This CERT is issued by the Canadian Construction Materials Centre (CCMC) to verify that construction materials and systems meet Canada's National Building Code requirements. CCMC Certification assesses various performance criteria, including durability, safety, and compliance, providing regulatory acceptance for building products used in Canada.
|
Good To Know - Brand Attributes
Governance
This brand is veteran-owned, meaning it is owned and operated by military veterans.
Origins
Made in United States of America
Tiger Foam Tiger Foam | Spray Foam Insulation Kit | TF-600SR
$850.00
Shop now launch
View description
Scored Product Attributes
5
Materials | |||
---|---|---|---|
VOC Free |
Certifications | |||
---|---|---|---|
This CERT specifies test methods for determining the compressive properties of rigid cellular materials, such as foams. ASTM D1621 helps ensure these materials meet structural requirements, providing reliable data on compressive strength and behavior under loads, essential for construction and industrial applications.
|
Good To Know - Brand Attributes
Governance
This brand is veteran-owned, meaning it is owned and operated by military veterans.
Origins
Made in United States of America