Eqogo Logo

Adhesives & Sealers

84 Products

Each time you see a score on Eqogo, remember that it is relative to its product category. What does this mean?

Select 2 to 5 items to compare in detail.
93
in Tile Grout

LITOKOL Starlike EVO

Two-component acid-resistant epoxy grout for the installation and grouting of ceramic, porcelain and mosaic tiles with joints from 1 and 15 mm wide. Patent pending. For interiors and exteriors.

Scored Product Attributes

93
icon representing Social criteria factor icon representing Enviro criteria factor icon representing Quality criteria factor Materials

Recycled Content

icon representing Social criteria factor icon representing Enviro criteria factor icon representing Quality criteria factor Certifications

This CERT specifies the test method to determine the shear adhesion strength of reaction resin adhesives used for ceramic tiles, ensuring their suitability for internal and external wall and floor installations.

This CERT provides third-party-verified environmental data on products, based on lifecycle assessment (LCA) in compliance with ISO standards. UL Environmental Product Declaration (EPD) promotes transparency in environmental impact, supporting informed decisions in sustainable design and construction by detailing a product’s environmental footprint.

This CERT specifies performance requirements for chemical-resistant, water-cleanable epoxy adhesives and grouts used in tile installations, ensuring durability and resistance to chemicals.

This CERT specifies the test method to determine the chemical resistance of reaction resin mortars used as grouts and adhesives for ceramic tiles, ensuring their durability under anticipated service conditions.

This CERT specifies the test method to determine the abrasion resistance of ceramic tile grouts, ensuring their durability and suitability for both internal and external wall and floor installations.

This CERT specifies the test method to determine the flexural and compressive strength of ceramic tile grouts, ensuring their mechanical performance for both internal and external wall and floor installations.

This CERT specifies the test method to determine the shrinkage of ceramic tile grouts, ensuring their dimensional stability for both internal and external wall and floor installations.

This CERT specifies the test method to determine the water absorption coefficient due to capillary action in ceramic tile grouts, ensuring their suitability for internal and external wall and floor installations.

This CERT provides a test method for determining the open time of ceramic tile adhesives. It applies to building materials and ensures quality by helping manufacturers assess adhesive performance for proper tile installation.

This CERT specifies requirements and test methods for grouts used in ceramic tile installations, ensuring performance and durability.
88
in Caulk

Chem Link Multi-Purpose Roof Sealant, Vinyl Siding Sealant, Duralink 35

DuraLink 35 is a high performance, multi-purpose, moisture curing elastomeric sealant suitable for a wide range of applications including as a vinyl siding sealant. Multiple colors and package sizes.

Scored Product Attributes

88
icon representing Social criteria factor icon representing Enviro criteria factor icon representing Quality criteria factor Certifications

This CERT verifies that products comply with the California Air Resources Board (CARB) standards for air quality, specifically limiting emissions of formaldehyde and other harmful substances.

This CERT specifies test methods for evaluating the flexibility and resistance to cracking of attached organic coatings, such as paints and varnishes, on substrates like sheet metal or rubber-type materials. By employing mandrel bend tests, it assesses a coating's ability to withstand deformation without cracking, providing essential data on its durability during manufacturing processes and in-service conditions.

This CERT specifies the test method for evaluating the hardness of elastomeric materials used in joint sealants, ensuring their durability, flexibility, and compatibility in construction applications.

This CERT specifies the test method for assessing the adhesion properties of sealants to various substrates, ensuring reliable bonding and performance in construction applications.

This CERT specifies the requirements for elastomeric joint sealants used in building construction, focusing on properties such as adhesion, flexibility, and durability, ensuring reliable performance in dynamic joints under various environmental conditions.

This CERT specifies the test method for measuring the lap shear strength of adhesives on rigid substrates, ensuring the adhesive's performance, bond strength, and durability in structural applications.

This CERT specifies the test method for determining the volatile content of coatings, including paints, varnishes, and related products, ensuring consistency, quality, and compliance with environmental and regulatory standards.

This CERT specifies the test methods for determining the tensile properties of vulcanized rubber and thermoplastic elastomers, including tensile strength, elongation, and modulus, ensuring quality and performance in flexible materials.

This CERT validates the performance data of liquid sealant products through independent testing, ensuring accuracy and reliability for end-users.
Warranty: 1 year

Good To Know - Brand Attributes

icon representing item origin Origins
Made in United States of America
83
in Caulk

Chem Link DuraGlaze Plus - Chem Link

DuraGlaze Plus is an elastic, high-performance, moisture-cure sealant designed for use in fenestrations and other areas subject to movement.

Scored Product Attributes

83
icon representing Social criteria factor icon representing Enviro criteria factor icon representing Quality criteria factor Certifications

This CERT verifies that products comply with the California Air Resources Board (CARB) standards for air quality, specifically limiting emissions of formaldehyde and other harmful substances.

This CERT specifies test methods for evaluating the flexibility and resistance to cracking of attached organic coatings, such as paints and varnishes, on substrates like sheet metal or rubber-type materials. By employing mandrel bend tests, it assesses a coating's ability to withstand deformation without cracking, providing essential data on its durability during manufacturing processes and in-service conditions.

This CERT specifies the test method for evaluating the hardness of elastomeric materials used in joint sealants, ensuring their durability, flexibility, and compatibility in construction applications.

This CERT specifies the test method for assessing the adhesion properties of sealants to various substrates, ensuring reliable bonding and performance in construction applications.

This CERT specifies the requirements for elastomeric joint sealants used in building construction, focusing on properties such as adhesion, flexibility, and durability, ensuring reliable performance in dynamic joints under various environmental conditions.

This CERT specifies the test method for measuring the lap shear strength of adhesives on rigid substrates, ensuring the adhesive's performance, bond strength, and durability in structural applications.

This CERT specifies the test method for determining the volatile content of coatings, including paints, varnishes, and related products, ensuring consistency, quality, and compliance with environmental and regulatory standards.

This CERT specifies the test methods for determining the tensile properties of vulcanized rubber and thermoplastic elastomers, including tensile strength, elongation, and modulus, ensuring quality and performance in flexible materials.

This CERT validates the performance data of liquid sealant products through independent testing, ensuring accuracy and reliability for end-users.

Good To Know - Brand Attributes

icon representing item origin Origins
Made in United States of America
80
in Caulk

Sashco Big Stretch - Sashco

Big Stretch is a high-quality, professional-grade elastomeric sealant that is specifically designed for use in a wide range of residential building and remodeling applications.

Scored Product Attributes

80
icon representing Social criteria factor icon representing Enviro criteria factor icon representing Quality criteria factor Certifications

This CERT provides a test method for determining the airborne sound transmission loss of building partitions and elements. ASTM E90 is essential for evaluating the soundproofing effectiveness of walls, floors, and ceilings, supporting noise control in residential, commercial, and industrial spaces.

This CERT specifies the test method for evaluating the hardness of elastomeric materials used in joint sealants, ensuring their durability, flexibility, and compatibility in construction applications.

This CERT specifies the test method for evaluating the adhesion and cohesion of elastomeric joint sealants under cyclic movement, ensuring durability and flexibility in construction applications.

This CERT specifies the test method for evaluating the freezing and thawing resistance of glass containers, ensuring their durability and performance under temperature variations.

This CERT specifies the test method for evaluating the low-temperature flexibility of single-component, chemically curing sealants, ensuring their durability and performance in cold environments.

This CERT specifies the test method for assessing the adhesion properties of sealants to various substrates, ensuring reliable bonding and performance in construction applications.

This CERT specifies the requirements for latex sealants used in construction applications, focusing on properties like flexibility, adhesion, and durability, ensuring performance under varying temperature and environmental conditions.

This CERT specifies the requirements for elastomeric joint sealants used in building construction, focusing on properties such as adhesion, flexibility, and durability, ensuring reliable performance in dynamic joints under various environmental conditions.
Warranty: Limited Lifetime

Good To Know - Brand Attributes

icon representing item origin Origins
Made in United States of America
79
in Caulk

Chem Link DuraLink 50 Super Adhesion Sealant - Chem Link

DuraLink 50 is an extremely elastic, moisture cure, elastomeric sealant designed for use in roofing, cementitious siding, metal architecture, curtain wall construction and joints subject to movement.

Scored Product Attributes

79
icon representing Social criteria factor icon representing Enviro criteria factor icon representing Quality criteria factor Materials

Isocyanate Free

icon representing Social criteria factor icon representing Enviro criteria factor icon representing Quality criteria factor Certifications

This CERT verifies that products comply with the California Air Resources Board (CARB) standards for air quality, specifically limiting emissions of formaldehyde and other harmful substances.

This CERT specifies test methods for evaluating the flexibility and resistance to cracking of attached organic coatings, such as paints and varnishes, on substrates like sheet metal or rubber-type materials. By employing mandrel bend tests, it assesses a coating's ability to withstand deformation without cracking, providing essential data on its durability during manufacturing processes and in-service conditions.

This CERT specifies the test method for evaluating the hardness of elastomeric materials used in joint sealants, ensuring their durability, flexibility, and compatibility in construction applications.

This CERT specifies the test method for assessing the adhesion properties of sealants to various substrates, ensuring reliable bonding and performance in construction applications.

This CERT specifies the requirements for elastomeric joint sealants used in building construction, focusing on properties such as adhesion, flexibility, and durability, ensuring reliable performance in dynamic joints under various environmental conditions.

This CERT specifies the test method for measuring the lap shear strength of adhesives on rigid substrates, ensuring the adhesive's performance, bond strength, and durability in structural applications.

This CERT specifies the test methods for determining the tensile properties of vulcanized rubber and thermoplastic elastomers, including tensile strength, elongation, and modulus, ensuring quality and performance in flexible materials.

This CERT validates the performance data of liquid sealant products through independent testing, ensuring accuracy and reliability for end-users.
Warranty: 1 year

Good To Know - Brand Attributes

icon representing item origin Origins
Made in United States of America
77
in Caulk

OSI OSI® QUAD® - Clear

A premium solvent-based sealant that ensures lasting durability, flexibility, and weather resistance for professional window, door, and siding installations in any environment.

Scored Product Attributes

77
icon representing Social criteria factor icon representing Enviro criteria factor icon representing Quality criteria factor Certifications

This CERT verifies that products comply with the California Air Resources Board (CARB) standards for air quality, specifically limiting emissions of formaldehyde and other harmful substances.

This CERT specifies performance requirements and testing methods for coatings applied to concrete surfaces, ensuring durability, adhesion, and resistance to environmental factors for protective and decorative purposes.

This CERT specifies the test method for evaluating the hardness of elastomeric materials used in joint sealants, ensuring their durability, flexibility, and compatibility in construction applications.

This CERT specifies the test method for evaluating the adhesion and cohesion of elastomeric joint sealants under cyclic movement, ensuring durability and flexibility in construction applications.

This CERT specifies the test method for assessing the adhesion properties of sealants to various substrates, ensuring reliable bonding and performance in construction applications.

This CERT specifies the requirements for elastomeric joint sealants used in building construction, focusing on properties such as adhesion, flexibility, and durability, ensuring reliable performance in dynamic joints under various environmental conditions.

This CERT specifies the test methods for determining the tensile properties of vulcanized rubber and thermoplastic elastomers, including tensile strength, elongation, and modulus, ensuring quality and performance in flexible materials.

This CERT aims to reduce emissions of volatile organic compounds (VOCs), toxic air contaminants, and ozone-depleting compounds from the use of adhesives, adhesive primers, sealants, and sealant primers within the South Coast Air Quality Management District.
71
in Caulk

Loctite Loctite PL Window, Door & Siding

Forming commercial grade seals. Permanent water and weather resistant.

Scored Product Attributes

71
icon representing Social criteria factor icon representing Enviro criteria factor icon representing Quality criteria factor Certifications

This CERT verifies that products comply with the California Air Resources Board (CARB) standards for air quality, specifically limiting emissions of formaldehyde and other harmful substances.

This CERT specifies the test method for determining the staining of porous surfaces by joint sealants, ensuring sealants are compatible with materials like masonry, stone, and concrete to prevent aesthetic and structural issues.

This CERT specifies the test method for evaluating the adhesion and cohesion of elastomeric joint sealants under cyclic movement, ensuring durability and flexibility in construction applications.

This CERT specifies the test method for determining the effects of heat aging on the weight loss, cracking, and chalking of preformed tape sealants, ensuring their durability and performance in high-temperature applications.

This CERT specifies the requirements for elastomeric joint sealants used in building construction, focusing on properties such as adhesion, flexibility, and durability, ensuring reliable performance in dynamic joints under various environmental conditions.

This CERT specifies the test method for determining the tear resistance of flexible plastic film and sheeting, ensuring durability and quality in applications requiring resistance to tearing under stress.

This CERT specifies the test methods for determining the tensile properties of vulcanized rubber and thermoplastic elastomers, including tensile strength, elongation, and modulus, ensuring quality and performance in flexible materials.

This CERT specifies the test method for evaluating the cracking resistance of paint and coatings on flexible substrates, ensuring durability and performance in various environmental and mechanical conditions.
70
in Caulk

GE Paintable Silicone Caulk - Paintable Supreme Window & Door Sealant

Seal with a reliable seal in areas that may be exposed to moisture and require painting with GE Sealants Paintable Supreme Window & Door Sealant.

Scored Product Attributes

70
icon representing Social criteria factor icon representing Enviro criteria factor icon representing Quality criteria factor Certifications

This CERT verifies that products comply with the California Air Resources Board (CARB) standards for air quality, specifically limiting emissions of formaldehyde and other harmful substances.

This CERT specifies the test method for evaluating the hardness of elastomeric materials used in joint sealants, ensuring their durability, flexibility, and compatibility in construction applications.

This CERT specifies the test method for evaluating the adhesion and cohesion of elastomeric joint sealants under cyclic movement, ensuring durability and flexibility in construction applications.

This CERT specifies the requirements for elastomeric joint sealants used in building construction, focusing on properties such as adhesion, flexibility, and durability, ensuring reliable performance in dynamic joints under various environmental conditions.

This CERT specifies the test methods for determining the tensile properties of vulcanized rubber and thermoplastic elastomers, including tensile strength, elongation, and modulus, ensuring quality and performance in flexible materials.

This CERT aims to reduce emissions of volatile organic compounds (VOCs), toxic air contaminants, and ozone-depleting compounds from the use of adhesives, adhesive primers, sealants, and sealant primers within the South Coast Air Quality Management District.
Warranty: Limited Lifetime

Good To Know - Brand Attributes

icon representing Social criteria factor Social

Company participates in community outreach or activism programs.
70
in Caulk

OSI OSI® H2U

High quality, latex-based sealant that offers good adhesion, flexibility, and durability for windows, doors, siding, and trim. Can be used both indoors and outdoors. Easy to clean-up.

Scored Product Attributes

70
icon representing Social criteria factor icon representing Enviro criteria factor icon representing Quality criteria factor Certifications

This CERT verifies that products comply with the California Air Resources Board (CARB) standards for air quality, specifically limiting emissions of formaldehyde and other harmful substances.

This CERT specifies the test method for evaluating the hardness of elastomeric materials used in joint sealants, ensuring their durability, flexibility, and compatibility in construction applications.

This CERT specifies the test method for evaluating the adhesion and cohesion of elastomeric joint sealants under cyclic movement, ensuring durability and flexibility in construction applications.

This CERT specifies the test method for assessing the adhesion properties of sealants to various substrates, ensuring reliable bonding and performance in construction applications.

This CERT specifies the requirements for elastomeric joint sealants used in building construction, focusing on properties such as adhesion, flexibility, and durability, ensuring reliable performance in dynamic joints under various environmental conditions.

This CERT specifies the test methods for determining the tensile properties of vulcanized rubber and thermoplastic elastomers, including tensile strength, elongation, and modulus, ensuring quality and performance in flexible materials.

This CERT aims to reduce emissions of volatile organic compounds (VOCs), toxic air contaminants, and ozone-depleting compounds from the use of adhesives, adhesive primers, sealants, and sealant primers within the South Coast Air Quality Management District.
62
in Caulk

Sashco Exact Color - Sashco

eXact Color tintable caulk is a high-performance caulk that allows you to customize the color to match your specific needs.

Scored Product Attributes

62
icon representing Social criteria factor icon representing Enviro criteria factor icon representing Quality criteria factor Certifications

This CERT specifies the test method for evaluating the hardness of elastomeric materials used in joint sealants, ensuring their durability, flexibility, and compatibility in construction applications.

This CERT specifies the test method for evaluating the adhesion and cohesion of elastomeric joint sealants under cyclic movement, ensuring durability and flexibility in construction applications.

This CERT specifies the test method for evaluating the freezing and thawing resistance of glass containers, ensuring their durability and performance under temperature variations.

This CERT specifies the test method for evaluating the low-temperature flexibility of single-component, chemically curing sealants, ensuring their durability and performance in cold environments.

This CERT specifies the test method for assessing the adhesion properties of sealants to various substrates, ensuring reliable bonding and performance in construction applications.

This CERT specifies the requirements for latex sealants used in construction applications, focusing on properties like flexibility, adhesion, and durability, ensuring performance under varying temperature and environmental conditions.
Warranty: Limited Lifetime
61
in Caulk

GE All-Purpose Caulk | GE All Purpose Silicone 1 Sealant

Seal with GE Sealants All Purpose Silicone 1 Sealant for a 100% silicone and 100% weatherproof sealant for any caulking project.

Scored Product Attributes

61
icon representing Social criteria factor icon representing Enviro criteria factor icon representing Quality criteria factor Certifications

This CERT verifies that products comply with the California Air Resources Board (CARB) standards for air quality, specifically limiting emissions of formaldehyde and other harmful substances.

This CERT specifies the test method for evaluating the adhesion and cohesion of elastomeric joint sealants under cyclic movement, ensuring durability and flexibility in construction applications.

This CERT specifies the requirements for elastomeric joint sealants used in building construction, focusing on properties such as adhesion, flexibility, and durability, ensuring reliable performance in dynamic joints under various environmental conditions.

This CERT specifies the test methods for determining the tensile properties of vulcanized rubber and thermoplastic elastomers, including tensile strength, elongation, and modulus, ensuring quality and performance in flexible materials.

This CERT aims to reduce emissions of volatile organic compounds (VOCs), toxic air contaminants, and ozone-depleting compounds from the use of adhesives, adhesive primers, sealants, and sealant primers within the South Coast Air Quality Management District.
Warranty: Limited Lifetime

Good To Know - Brand Attributes

icon representing Social criteria factor Social

Company participates in community outreach or activism programs.
61
in Tile Grout

LITOKOL Starlike ColorCrystal EVO

Two-component acid-resistant coloured translucent epoxy grout for grouting clear and artistic vitreous mosaics with joints up to 3 mm wide.

Scored Product Attributes

61
icon representing Social criteria factor icon representing Enviro criteria factor icon representing Quality criteria factor Materials

Recycled Content

icon representing Social criteria factor icon representing Enviro criteria factor icon representing Quality criteria factor Certifications

This CERT provides third-party-verified environmental data on products, based on lifecycle assessment (LCA) in compliance with ISO standards. UL Environmental Product Declaration (EPD) promotes transparency in environmental impact, supporting informed decisions in sustainable design and construction by detailing a product’s environmental footprint.

This CERT specifies the test method to determine the abrasion resistance of ceramic tile grouts, ensuring their durability and suitability for both internal and external wall and floor installations.

This CERT specifies the test method to determine the flexural and compressive strength of ceramic tile grouts, ensuring their mechanical performance for both internal and external wall and floor installations.

This CERT specifies the test method to determine the shrinkage of ceramic tile grouts, ensuring their dimensional stability for both internal and external wall and floor installations.

This CERT specifies the test method to determine the water absorption coefficient due to capillary action in ceramic tile grouts, ensuring their suitability for internal and external wall and floor installations.

This CERT specifies requirements and test methods for grouts used in ceramic tile installations, ensuring performance and durability.
55
in Tile Grout

Bostik Hydroment Vivid | Rapid Curing High Performance Grout | Bostik US

Hydroment Vivid high performance rapid curing cement grout offers ease of installation and a superior color consistent grout joint.

Scored Product Attributes

55
icon representing Social criteria factor icon representing Enviro criteria factor icon representing Quality criteria factor Materials

VOC Free

icon representing Social criteria factor icon representing Enviro criteria factor icon representing Quality criteria factor Certifications

This CERT provides third-party-verified environmental data on products, based on lifecycle assessment (LCA) in compliance with ISO standards. UL Environmental Product Declaration (EPD) promotes transparency in environmental impact, supporting informed decisions in sustainable design and construction by detailing a product’s environmental footprint.

This CERT verifies that hard surface flooring materials, adhesives, and underlayments meet stringent indoor air quality (IAQ) standards by limiting emissions of volatile organic compounds (VOCs), thereby contributing to healthier indoor environments.

This CERT specifies performance requirements for high-performance cement grouts used in tile installations, ensuring enhanced durability and reduced water absorption.

This CERT aims to reduce emissions of volatile organic compounds (VOCs), toxic air contaminants, and ozone-depleting compounds from the use of adhesives, adhesive primers, sealants, and sealant primers within the South Coast Air Quality Management District.
Warranty: 20 - 34 Day
52
in Caulk

Sashco CleanSeal - Sashco

CleanSeal kitchen and bath caulk is a specially formulated sealant designed to provide a long-lasting, waterproof seal around kitchen and bathroom fixtures.

Scored Product Attributes

52
icon representing Social criteria factor icon representing Enviro criteria factor icon representing Quality criteria factor Certifications

This CERT specifies the test method for evaluating the hardness of elastomeric materials used in joint sealants, ensuring their durability, flexibility, and compatibility in construction applications.

This CERT specifies the test method for evaluating the freezing and thawing resistance of glass containers, ensuring their durability and performance under temperature variations.

This CERT specifies the test method for evaluating the low-temperature flexibility of single-component, chemically curing sealants, ensuring their durability and performance in cold environments.

This CERT specifies the test method for assessing the adhesion properties of sealants to various substrates, ensuring reliable bonding and performance in construction applications.

This CERT specifies the requirements for latex sealants used in construction applications, focusing on properties like flexibility, adhesion, and durability, ensuring performance under varying temperature and environmental conditions.
Warranty: Over 5 - 7 Year

Good To Know - Brand Attributes

icon representing item origin Origins
Made in United States of America
52
in Tile Grout

MAPEI Planigrout 712

Planigrout 712 is a one-component, nonshrinking, nonmetallic, cement-based grout. Planigrout 712 contains a corrosion inhibitor and silica fume, as well as a special blend of fine aggregate and plasticizers that provide exceptional placing and performance characteristics.

Scored Product Attributes

52
icon representing Social criteria factor icon representing Enviro criteria factor icon representing Quality criteria factor Certifications

This CERT specifies the procedure for determining the bond strength of epoxy-resin-based bonding systems used with portland-cement concrete, assessing the effectiveness of these systems in adhering hardened concrete to either hardened or freshly mixed concrete.

This CERT specifies the requirements for non-shrink, nonmetallic grout for use in general construction, including repair and structural applications, focusing on consistency, strength, and volume stability.

This CERT specifies the requirements for the flow table apparatus used in testing the consistency of mortars and hydraulic cement pastes, ensuring reliable and standardized measurements for workability and performance.

This CERT specifies the test method for determining the flexural strength of hydraulic cement mortars, ensuring performance consistency and reliability for construction applications.

This CERT specifies the test method for measuring the compressive strength of grouts for preplaced-aggregate concrete, ensuring their performance, consistency, and structural integrity in construction applications.

This CERT aims to reduce emissions of volatile organic compounds (VOCs), toxic air contaminants, and ozone-depleting compounds from the use of adhesives, adhesive primers, sealants, and sealant primers within the South Coast Air Quality Management District.
50
in Caulk

OSI OSI® HM270

Temperature extremes are no match for HM270 - an acetoxy silicone that withstands harsh conditions from -76°F to 350°F without missing a beat. Designed for use on non-porous materials, its application possibilities include a variety of tough challenges: ceiling skylights, solar panels, duct work, aluminum siding, recreational vehicles and more.

Scored Product Attributes

50
icon representing Social criteria factor icon representing Enviro criteria factor icon representing Quality criteria factor Certifications

This CERT verifies that products comply with the California Air Resources Board (CARB) standards for air quality, specifically limiting emissions of formaldehyde and other harmful substances.

This CERT specifies the requirements for elastomeric joint sealants used in building construction, focusing on properties such as adhesion, flexibility, and durability, ensuring reliable performance in dynamic joints under various environmental conditions.

This CERT specifies the test methods for determining the tensile properties of vulcanized rubber and thermoplastic elastomers, including tensile strength, elongation, and modulus, ensuring quality and performance in flexible materials.

This CERT specifies the test method for measuring the peel or stripping strength of adhesive bonds, ensuring durability, consistency, and performance in bonded materials used across industrial and consumer applications.

This CERT aims to reduce emissions of volatile organic compounds (VOCs), toxic air contaminants, and ozone-depleting compounds from the use of adhesives, adhesive primers, sealants, and sealant primers within the South Coast Air Quality Management District.
46
in Caulk

GE Reliable Seal | GE Sealants Supreme Silicone Window & Door

Supreme Silicone Window & Door sealant is a premium, 100% silicone and 100% waterproof sealant that provides a reliable seal in weather-prone areas like windows, doors, basements, roofs, sidewalks, siding, tuckpointing and attics. This sealant offers 100% more flexibility than Class 25 sealants and 7X stronger adhesion than Silicone 1® sealant.

Scored Product Attributes

46
icon representing Social criteria factor icon representing Enviro criteria factor icon representing Quality criteria factor Certifications

This CERT verifies that products comply with the California Air Resources Board (CARB) standards for air quality, specifically limiting emissions of formaldehyde and other harmful substances.

This CERT specifies the requirements for elastomeric joint sealants used in building construction, focusing on properties such as adhesion, flexibility, and durability, ensuring reliable performance in dynamic joints under various environmental conditions.

This CERT aims to reduce emissions of volatile organic compounds (VOCs), toxic air contaminants, and ozone-depleting compounds from the use of adhesives, adhesive primers, sealants, and sealant primers within the South Coast Air Quality Management District.
Warranty: Limited Lifetime

Good To Know - Brand Attributes

icon representing Social criteria factor Social

Company participates in community outreach or activism programs.
40
in Tile Grout

Sika SikaGrout-928

SikaGrout-928 grout is a hydraulic cement-based mineral aggregate non-shrink grout with extended working time. It is ideally suited for grouting machines or plates requiring precision load-bearing support. It can be placed from fluid to damp pack over a temperature range of 45 to 90 F (7 to 32 C).

Scored Product Attributes

40
icon representing Social criteria factor icon representing Enviro criteria factor icon representing Quality criteria factor Certifications

This CERT ensures that products in contact with drinking water meet health and safety standards under NSF/ANSI/CAN 61-2022. It addresses material safety, ensuring no harmful contaminants are leached into potable water, supporting public health protection in plumbing systems.

This CERT specifies laboratory procedures to assess the durability of concrete specimens under rapid freezing and thawing cycles, evaluating their resistance to such conditions.

This CERT specifies performance requirements for chemical-resistant, water-cleanable epoxy adhesives and grouts used in tile installations, ensuring durability and resistance to chemicals.

This CERT specifies performance requirements for standard cement grouts used in tile installations, including compressive strength, flexural strength, shrinkage, and water absorption.

This CERT specifies the requirements for non-shrink, nonmetallic grout for use in general construction, including repair and structural applications, focusing on consistency, strength, and volume stability.

This CERT specifies the test method for measuring the linear shrinkage and expansion of hardened hydraulic-cement mortars and concrete, ensuring dimensional stability for structural and durability applications.
39
in Tile Grout

MERKRETE Duracolor Sanded Grout Merkrete Tile Setting Materials

Duracolor Sanded Grout is a premium-grade, pre-blended, polymer-modified Portland cement tile grout requiring only the addition of water for mixing.

Scored Product Attributes

39
icon representing Social criteria factor icon representing Enviro criteria factor icon representing Quality criteria factor Certifications

This CERT specifies a test method for determining the compressive strength of hydraulic cement mortars using 2-inch (50 mm) cube specimens. It provides a standardized procedure to assess the strength development of cementitious materials, ensuring consistency and reliability in quality control and specification compliance.

This CERT specifies performance requirements for standard cement grouts used in tile installations, including compressive strength, flexural strength, shrinkage, and water absorption.

This CERT specifies the test method for measuring the linear shrinkage and expansion of hardened hydraulic-cement mortars and concrete, ensuring dimensional stability for structural and durability applications.

This CERT specifies the test method for determining the flexural strength and modulus of elasticity of chemical-resistant mortars, grouts, monolithic surfacings, and polymer concretes, ensuring their durability and performance under flexural loads.
Warranty: 1 year
39
in Tile Grout

MERKRETE ProGrout Plus Merkrete Advanced Tile Setting Materials

ProGrout Plus is a high-performing, fast-setting, polymer-modified, color-consistent and efflorescence-free grout specifically formulated for all types of ceramic and dimensional stone tiles when joint widths are 1/16" up to 1/2" wide.

Scored Product Attributes

39
icon representing Social criteria factor icon representing Enviro criteria factor icon representing Quality criteria factor Certifications

This CERT specifies performance requirements for high-performance cement grouts used in tile installations, ensuring enhanced durability and reduced water absorption.

This CERT specifies the test method for measuring the linear shrinkage and expansion of hardened hydraulic-cement mortars and concrete, ensuring dimensional stability for structural and durability applications.

This CERT specifies the test method for determining the flexural strength and modulus of elasticity of chemical-resistant mortars, grouts, monolithic surfacings, and polymer concretes, ensuring their durability and performance under flexural loads.

This CERT defines terms, definitions, and performance specifications for ceramic tile grouts, ensuring standardized quality in tile installations.
Warranty: 1 year
38
in Caulk

Titebond Titebond

Titebond Acoustical Smoke & Sound Sealant is a professional-quality sealant designed to improve STC (Sound Transmission Class) ratings in wall and floor systems.

Scored Product Attributes

38
icon representing Social criteria factor icon representing Enviro criteria factor icon representing Quality criteria factor Certifications

This CERT outlines a standard test method for assessing the surface burning characteristics of building materials. ASTM E84, also known as the "Steiner Tunnel Test," measures flame spread and smoke development, essential for determining the fire safety of materials used in construction

This CERT specifies the requirements for adhesives used in the installation of wood-based panels, including particleboard, fiberboard, and plywood, ensuring durability, bond strength, and compatibility with construction applications.

This CERT specifies the requirements for latex sealants used in construction applications, focusing on properties like flexibility, adhesion, and durability, ensuring performance under varying temperature and environmental conditions.

This CERT specifies the requirements for elastomeric joint sealants used in building construction, focusing on properties such as adhesion, flexibility, and durability, ensuring reliable performance in dynamic joints under various environmental conditions.

Good To Know - Brand Attributes

icon representing item origin Origins
Made in United States of America
38
in Tile Grout

Bostik Dimension RapidCure | Glass-Filled Pre-Mixed Urethane Grout | Bostik US

Dimension RapidCure Glass-Filled, reflective, translucent Urethane Grout creates a variety of aesthetic effects in tile and stone.

Scored Product Attributes

38
icon representing Social criteria factor icon representing Enviro criteria factor icon representing Quality criteria factor Materials

Pre-consumer Recycled Glass

icon representing Social criteria factor icon representing Enviro criteria factor icon representing Quality criteria factor Certifications

This CERT verifies that hard surface flooring materials, adhesives, and underlayments meet stringent indoor air quality (IAQ) standards by limiting emissions of volatile organic compounds (VOCs), thereby contributing to healthier indoor environments.

This CERT specifies the standardized test methods for evaluating the chemical resistance of mortars, grouts, and monolithic surfacings, ensuring their durability and performance under exposure to aggressive chemicals.

This CERT aims to reduce emissions of volatile organic compounds (VOCs), toxic air contaminants, and ozone-depleting compounds from the use of adhesives, adhesive primers, sealants, and sealant primers within the South Coast Air Quality Management District.
Warranty: 20 - 34 Day
37
in Tile Grout

MAPEI Keracolor S Sanded Grout

Keracolor S Sanded Grout is a premium-grade, pre-blended, polymer-modified sanded Portland-cement tile grout that requires only the addition of water for mixing.

Scored Product Attributes

37
icon representing Social criteria factor icon representing Enviro criteria factor icon representing Quality criteria factor Certifications

This CERT provides third-party-verified environmental data on products, based on lifecycle assessment (LCA) in compliance with ISO standards. UL Environmental Product Declaration (EPD) promotes transparency in environmental impact, supporting informed decisions in sustainable design and construction by detailing a product’s environmental footprint.

This CERT specifies performance standards and test methods for adhesives and mortars used in ceramic tile and stone installations. It ensures reliability, durability, and compliance with construction requirements in residential, commercial, and industrial settings.

This CERT specifies the standard practice for determining the resistance of synthetic polymeric materials to fungal growth, ensuring durability and preventing microbial degradation in humid or damp environments.
36
in Tile Grout

TEC AccuColor Premium Sanded Grout | TEC

AccuColor Premium Sanded Grout is a polymer-enhanced, portland cement grout and is specifically formulated to provide highly wear-resistant color consistent joints.

Scored Product Attributes

36
icon representing Social criteria factor icon representing Enviro criteria factor icon representing Quality criteria factor Materials

VOC Free

icon representing Social criteria factor icon representing Enviro criteria factor icon representing Quality criteria factor Certifications

This CERT specifies performance requirements for high-performance cement grouts used in tile installations, ensuring enhanced durability and reduced water absorption.

This CERT specifies performance requirements for standard cement grouts used in tile installations, including compressive strength, flexural strength, shrinkage, and water absorption.

This CERT indicates that a product has been tested and certified for low volatile organic compound (VOC) emissions, ensuring it contributes to healthier indoor air quality.
Warranty: Over 3-5 Year
32
in Tile Grout

CUSTOM Building Products Prism Ultimate Performance Grout - CUSTOM Building Products

Prism® Ultimate Performance Grout sets a new standard in cement based grout technology. Prism’s calcium Aluminate cement based, latex polymer-modified formula offers consistent color with no shading regardless of tile type, temperature or humidity, and it will not effloresce.

Scored Product Attributes

32
icon representing Social criteria factor icon representing Enviro criteria factor icon representing Quality criteria factor Certifications

This CERT specifies performance standards and test methods for adhesives and mortars used in ceramic tile and stone installations. It ensures reliability, durability, and compliance with construction requirements in residential, commercial, and industrial settings.

This CERT specifies a test method for determining the compressive strength of hydraulic cement mortars using 2-inch (50 mm) cube specimens. It provides a standardized procedure to assess the strength development of cementitious materials, ensuring consistency and reliability in quality control and specification compliance.

This CERT specifies the test method for measuring the linear shrinkage and expansion of hardened hydraulic-cement mortars and concrete, ensuring dimensional stability for structural and durability applications.

This CERT specifies the test method for determining the flexural strength and modulus of elasticity of chemical-resistant mortars, grouts, monolithic surfacings, and polymer concretes, ensuring their durability and performance under flexural loads.
32
in Caulk

Sika Sikaflex-201 US

Sikaflex-201 US is a multi-purpose 1-component polyurethane sealant which cures on exposure to atmospheric moisture suitable for making permanent flexible and elastic seals.It is designed with a long open time for applications that require additional working time.

Scored Product Attributes

32
icon representing Social criteria factor icon representing Enviro criteria factor icon representing Quality criteria factor Certifications

This CERT ensures that products in contact with drinking water meet health and safety standards under NSF/ANSI/CAN 61-2022. It addresses material safety, ensuring no harmful contaminants are leached into potable water, supporting public health protection in plumbing systems.

This CERT outlines a standard test method for assessing the surface burning characteristics of building materials. ASTM E84, also known as the "Steiner Tunnel Test," measures flame spread and smoke development, essential for determining the fire safety of materials used in construction

This CERT provides a test method for determining the airborne sound transmission loss of building partitions and elements. ASTM E90 is essential for evaluating the soundproofing effectiveness of walls, floors, and ceilings, supporting noise control in residential, commercial, and industrial spaces.

This CERT specifies the test methods for determining the tensile properties of vulcanized rubber and thermoplastic elastomers, including tensile strength, elongation, and modulus, ensuring quality and performance in flexible materials.
Warranty: 1 year
31
in Tile Grout

Bostik TruColor RapidCure | Premium, Pre-Mixed, Urethane Grout | Bostik US

Bostik TruColor RapidCure pre-mixed stain resistant urethane grout offers superior color consistency and never requires sealing.

Scored Product Attributes

31
icon representing Social criteria factor icon representing Enviro criteria factor icon representing Quality criteria factor Materials

Pre-consumer Recycled Glass

icon representing Social criteria factor icon representing Enviro criteria factor icon representing Quality criteria factor Certifications

This CERT verifies that hard surface flooring materials, adhesives, and underlayments meet stringent indoor air quality (IAQ) standards by limiting emissions of volatile organic compounds (VOCs), thereby contributing to healthier indoor environments.

This CERT specifies performance requirements for chemical-resistant, water-cleanable epoxy adhesives and grouts used in tile installations, ensuring durability and resistance to chemicals.

This CERT specifies the standardized test methods for evaluating the chemical resistance of mortars, grouts, and monolithic surfacings, ensuring their durability and performance under exposure to aggressive chemicals.
Warranty: 20 - 34 Day
31
in Tile Grout

Kerakoll Epobinder

Fluid epoxy system for construction joints, grouting on concrete, synthetic mortars and finishings.

Scored Product Attributes

31
icon representing Social criteria factor icon representing Enviro criteria factor icon representing Quality criteria factor Certifications

This CERT specifies a method for determining the compressive strength of mortars and concretes used for the structural and non-structural repair of concrete structures, ensuring the effectiveness and reliability of repair materials.

This CERT specifies methods for measuring the adhesion of structural bonding agents used between fresh or hardened concrete and hardened concrete substrates, ensuring the effectiveness of repair and bonding materials in concrete structures.

This CERT specifies requirements for structural bonding products used in concrete repair and strengthening, ensuring performance and durability.

This CERT specifies requirements for products used to anchor reinforcing steel bars in concrete structures, ensuring structural integrity.
30
in Caulk

Sika Sikaflex-211 US

Sikaflex-211 USis a multi-purpose 1-component polyurethane sealant that cures on exposure to atmospheric moisture. It bonds well to a wide variety of substrates and is suitable for making permenant elastic seals.

Scored Product Attributes

30
icon representing Social criteria factor icon representing Enviro criteria factor icon representing Quality criteria factor Certifications

This CERT outlines a standard test method for assessing the surface burning characteristics of building materials. ASTM E84, also known as the "Steiner Tunnel Test," measures flame spread and smoke development, essential for determining the fire safety of materials used in construction

This CERT provides a test method for determining the airborne sound transmission loss of building partitions and elements. ASTM E90 is essential for evaluating the soundproofing effectiveness of walls, floors, and ceilings, supporting noise control in residential, commercial, and industrial spaces.

This CERT specifies the test methods for determining the tensile properties of vulcanized rubber and thermoplastic elastomers, including tensile strength, elongation, and modulus, ensuring quality and performance in flexible materials.
Warranty: 1 year
29
in Tile Grout

TEC AccuColor Plus Fast Setting Grout - Efflorescence Resistant Grout

AccuColor Plus Grout is an advanced performance grout that delivers color consistent grout joints. Call today!

Scored Product Attributes

29
icon representing Social criteria factor icon representing Enviro criteria factor icon representing Quality criteria factor Certifications

This CERT specifies performance requirements for high-performance cement grouts used in tile installations, ensuring enhanced durability and reduced water absorption.

This CERT indicates that a product has been tested and certified for low volatile organic compound (VOC) emissions, ensuring it contributes to healthier indoor air quality.
Warranty: Over 3-5 Year
29
in Tile Grout

LITOKOL FillGood EVO

Single component, ready-to-use, stain-proof, water-based polyurethane grout for compact and flexible joints with consistent and long-lasting colours.

Scored Product Attributes

29
icon representing Social criteria factor icon representing Enviro criteria factor icon representing Quality criteria factor Certifications

This CERT provides third-party-verified environmental data on products, based on lifecycle assessment (LCA) in compliance with ISO standards. UL Environmental Product Declaration (EPD) promotes transparency in environmental impact, supporting informed decisions in sustainable design and construction by detailing a product’s environmental footprint.

This CERT specifies the test method to determine the abrasion resistance of ceramic tile grouts, ensuring their durability and suitability for both internal and external wall and floor installations.
28
in Caulk

Titebond Titebond

Titebond 100% Silicone Sealant is a non-staining versatile formula designed for both interior and exterior applications. This strong, permanently flexible sealant will not shrink or discolor over time and provides excellent weather resistance.

Scored Product Attributes

28
icon representing Social criteria factor icon representing Enviro criteria factor icon representing Quality criteria factor Certifications

This CERT establishes minimum public health and sanitation requirements for materials used in the construction of commercial food equipment, ensuring they are safe for contact with food and suitable for use in food service environments.

This CERT specifies the requirements for elastomeric joint sealants used in building construction, focusing on properties such as adhesion, flexibility, and durability, ensuring reliable performance in dynamic joints under various environmental conditions.
Warranty: Limited Lifetime

Good To Know - Brand Attributes

icon representing item origin Origins
Made in United States of America
27
in Caulk

Loctite Loctite Polyseamseal All Purpose

Provides a durable bond and seal for general sealing projects.

Scored Product Attributes

27
icon representing Social criteria factor icon representing Enviro criteria factor icon representing Quality criteria factor Certifications

This CERT specifies the test method for evaluating the hardness of elastomeric materials used in joint sealants, ensuring their durability, flexibility, and compatibility in construction applications.

This CERT specifies the test methods for determining the tensile properties of vulcanized rubber and thermoplastic elastomers, including tensile strength, elongation, and modulus, ensuring quality and performance in flexible materials.

This CERT aims to reduce emissions of volatile organic compounds (VOCs), toxic air contaminants, and ozone-depleting compounds from the use of adhesives, adhesive primers, sealants, and sealant primers within the South Coast Air Quality Management District.
25
in Caulk

Dap ALEX Ultra Advanced Latex Sealant | DAP Global

ALEX ULTRA Advanced Latex Sealant is a high performing acrylic latex sealant that offers exceptional performance for the Pro Painter.

Scored Product Attributes

25
icon representing Social criteria factor icon representing Enviro criteria factor icon representing Quality criteria factor Certifications

This CERT specifies the requirements for latex sealants used in construction applications, focusing on properties like flexibility, adhesion, and durability, ensuring performance under varying temperature and environmental conditions.

This CERT specifies the requirements for elastomeric joint sealants used in building construction, focusing on properties such as adhesion, flexibility, and durability, ensuring reliable performance in dynamic joints under various environmental conditions.
Warranty: 1 year
25
in Caulk

Red Devil 100% Silicone Architectural Grade RTV Sealant

100% Silicone Sealant is a superior quality, multi-purpose formula that provides a long-lasting, weather-resistant seal on many common surfaces indoors or outdoors. It offers excellent adhesion, flexibility, and durability without cracking, shrinking, or peeling.

Scored Product Attributes

25
icon representing Social criteria factor icon representing Enviro criteria factor icon representing Quality criteria factor Certifications

This CERT verifies that products comply with the California Air Resources Board (CARB) standards for air quality, specifically limiting emissions of formaldehyde and other harmful substances.

This CERT specifies the requirements for elastomeric joint sealants used in building construction, focusing on properties such as adhesion, flexibility, and durability, ensuring reliable performance in dynamic joints under various environmental conditions.

Good To Know - Brand Attributes

icon representing item origin Origins
Made in United States of America
25
in Caulk

Red Devil House & Home Restore Window & Door Caulk

A premium siliconized acrylic sealant formulated to provide an extra-tight seal around windows, doors & other areas of the home.

Scored Product Attributes

25
icon representing Social criteria factor icon representing Enviro criteria factor icon representing Quality criteria factor Certifications

This CERT verifies that products comply with the California Air Resources Board (CARB) standards for air quality, specifically limiting emissions of formaldehyde and other harmful substances.

This CERT specifies the requirements for latex sealants used in construction applications, focusing on properties like flexibility, adhesion, and durability, ensuring performance under varying temperature and environmental conditions.
25
in Caulk

Red Devil Lifetime Pro Window, Door & Trim Advanced Sealant Plus Silicone

Lifetime® Pro Window, Door & Trim Advanced Sealant Plus Silicone is a high-performance, multi-purpose sealant formulated to last for the lifetime of your home. It includes Homeshield™ Antimicrobial Protection to ensure against the worst types of mold and mildew.

Scored Product Attributes

25
icon representing Social criteria factor icon representing Enviro criteria factor icon representing Quality criteria factor Certifications

This CERT verifies that products comply with the California Air Resources Board (CARB) standards for air quality, specifically limiting emissions of formaldehyde and other harmful substances.

This CERT specifies the requirements for elastomeric joint sealants used in building construction, focusing on properties such as adhesion, flexibility, and durability, ensuring reliable performance in dynamic joints under various environmental conditions.

Good To Know - Brand Attributes

icon representing item origin Origins
Made in United States of America
23
in Caulk

Dap DAP AMP Advanced Waterproof Window Sealant | DAP Global | DAP Global

Shop AMP Advanced Waterproof Window Sealant for projects that need to be done fast. It's 30 minute ready formula allows for quick, reliable fixes.

Scored Product Attributes

23
icon representing Social criteria factor icon representing Enviro criteria factor icon representing Quality criteria factor Certifications

This CERT specifies performance requirements and testing methods for coatings applied to concrete surfaces, ensuring durability, adhesion, and resistance to environmental factors for protective and decorative purposes.

This CERT specifies the requirements for elastomeric joint sealants used in building construction, focusing on properties such as adhesion, flexibility, and durability, ensuring reliable performance in dynamic joints under various environmental conditions.
Warranty: 1 year
21
in Tile Grout

MERKRETE Elite RTU Merkrete Advanced Tile Setting Materials

Merkrete Elite Ready-to-Use grout is a superior-performance pre-mixed grout that uses colored quartz technology to deliver color-consistent, stain-resistant results on nearly all tile and stone materials.

Scored Product Attributes

21
icon representing Social criteria factor icon representing Enviro criteria factor icon representing Quality criteria factor Certifications

This CERT specifies performance requirements for chemical-resistant, water-cleanable epoxy adhesives and grouts used in tile installations, ensuring durability and resistance to chemicals.

This CERT specifies performance requirements for standard cement grouts used in tile installations, including compressive strength, flexural strength, shrinkage, and water absorption.
Warranty: 1 year
99
in Epoxy Adhesives

MG Chemicals 832B - Black Epoxy

832B is a general purpose, rigid, 2-part black epoxy that provides extreme environmental, mechanical and physical protection for printed circuit boards and electronic assemblies.

Scored Product Attributes

99
icon representing Social criteria factor icon representing Enviro criteria factor icon representing Quality criteria factor Materials

Solvent Free

icon representing Social criteria factor icon representing Enviro criteria factor icon representing Quality criteria factor Certifications

This CERT verifies that electronic and electrical products meet the Restriction of Hazardous Substances (RoHS) standards, ensuring they are free from harmful materials like lead, mercury and cadmium.
Your Selections

Select 2 to 5 items to compare