The UL Listing Mark is one of the most common UL Marks. If a product carries this Mark, it means UL found that representative product samples met UL's safety requirements. These requirements are primarily based on UL's own published standards for safety.

The CSA mark on your product means it has been tested against applicable North American standards requirements. CSA Group is recognized and accredited in the U.S. by ANSI and by OSHA which lists us as a Nationally Recognized Testing Laboratory (NRTL). This enables us to test your products against the U.S. standards written or administered by organizations including the American National Standards Institute (ANSI), Underwriters Laboratories (UL), CSA Group (CSA), NSF International (NSF) and other organizations

CE marking is an administrative marking that indicates conformity with health, safety, and environmental protection standards for products sold within the European Economic Area (EEA). It is not a quality indicator or a certification mark. The CE marking is also found on products sold outside the EEA that have been manufactured to EEA standards. This makes the CE marking recognizable worldwide even to people who are not familiar with the European Economic Area. It is in that sense like the FCC Declaration of Conformity used for selling certain electronic devices in the United States.

The Geprüfte Sicherheit ("Tested Safety") or GS mark is a voluntary certification mark for technical equipment. It indicates that the equipment meets German and, if available, European safety requirements for such devices.

The UL Listing Mark is one of the most common UL Marks. If a product carries this Mark, it means UL found that representative product samples met UL's safety requirements. These requirements are primarily based on UL's own published standards for safety.

The RoHS Directive specify the limits on the use of lead, mercury, cadmium, hexavalent chromium, PBB and PBDEs in electrical and electronic equipment.

REACH is a regulation of the European Union, adopted to improve the protection of human health and the environment from the risks that can be posed by chemicals, while enhancing the competitiveness of the EU chemicals industry. It also promotes alternative methods for the hazard assessment of substances in order to reduce the number of tests on animals. 

Proposition 65 requires businesses to provide warnings to Californians about significant exposures to chemicals that cause cancer, birth defects or other reproductive harm. These chemicals can be in the products that Californians purchase, in their homes or workplaces, or that are released into the environment. By requiring that this information be provided, Proposition 65 enables Californians to make informed decisions about their exposures to these chemicals. Proposition 65 also prohibits California businesses from knowingly discharging significant amounts of listed chemicals into sources of drinking water.

CE marking is an administrative marking that indicates conformity with health, safety, and environmental protection standards for products sold within the European Economic Area (EEA). It is not a quality indicator or a certification mark. The CE marking is also found on products sold outside the EEA that have been manufactured to EEA standards. This makes the CE marking recognizable worldwide even to people who are not familiar with the European Economic Area. It is in that sense like the FCC Declaration of Conformity used for selling certain electronic devices in the United States.

ANSI Z87.1 Safety Glasses Such markings relay adherence to the minimum requirements laid out in the ANSI Z87.1 standard. Marking specifications are outlined in ANSI/ISEA Z87.1-2020, but this document covers a range of information, setting forth criteria related to the requirements, testing, permanent marking, selection, care, and use of protectors to minimize the occurrence and severity or prevention of injuries.

This European Standard specifies functional requirements for various types of personal eye-protectors and incorporates general considerations such as: designation, classification, basic requirements applicable to all eye-protectors, various particular and optional reqiurements, allocation of requirements, testing and application, marking, information for users.

Proposition 65 requires businesses to provide warnings to Californians about significant exposures to chemicals that cause cancer, birth defects or other reproductive harm. These chemicals can be in the products that Californians purchase, in their homes or workplaces, or that are released into the environment. By requiring that this information be provided, Proposition 65 enables Californians to make informed decisions about their exposures to these chemicals. Proposition 65 also prohibits California businesses from knowingly discharging significant amounts of listed chemicals into sources of drinking water.

CE marking is an administrative marking that indicates conformity with health, safety, and environmental protection standards for products sold within the European Economic Area (EEA). It is not a quality indicator or a certification mark. The CE marking is also found on products sold outside the EEA that have been manufactured to EEA standards. This makes the CE marking recognizable worldwide even to people who are not familiar with the European Economic Area. It is in that sense like the FCC Declaration of Conformity used for selling certain electronic devices in the United States.

ANSI Z87.1 Safety Glasses Such markings relay adherence to the minimum requirements laid out in the ANSI Z87.1 standard. Marking specifications are outlined in ANSI/ISEA Z87.1-2020, but this document covers a range of information, setting forth criteria related to the requirements, testing, permanent marking, selection, care, and use of protectors to minimize the occurrence and severity or prevention of injuries.

This European Standard specifies functional requirements for various types of personal eye-protectors and incorporates general considerations such as: designation, classification, basic requirements applicable to all eye-protectors, various particular and optional reqiurements, allocation of requirements, testing and application, marking, information for users.

Proposition 65 requires businesses to provide warnings to Californians about significant exposures to chemicals that cause cancer, birth defects or other reproductive harm. These chemicals can be in the products that Californians purchase, in their homes or workplaces, or that are released into the environment. By requiring that this information be provided, Proposition 65 enables Californians to make informed decisions about their exposures to these chemicals. Proposition 65 also prohibits California businesses from knowingly discharging significant amounts of listed chemicals into sources of drinking water.

CE marking is an administrative marking that indicates conformity with health, safety, and environmental protection standards for products sold within the European Economic Area (EEA). It is not a quality indicator or a certification mark. The CE marking is also found on products sold outside the EEA that have been manufactured to EEA standards. This makes the CE marking recognizable worldwide even to people who are not familiar with the European Economic Area. It is in that sense like the FCC Declaration of Conformity used for selling certain electronic devices in the United States.

ANSI Z87.1 Safety Glasses Such markings relay adherence to the minimum requirements laid out in the ANSI Z87.1 standard. Marking specifications are outlined in ANSI/ISEA Z87.1-2020, but this document covers a range of information, setting forth criteria related to the requirements, testing, permanent marking, selection, care, and use of protectors to minimize the occurrence and severity or prevention of injuries.

This Standard applies to eye and face protectors used in all occupational and educational operations or processes involving hazards to the eyes or face. Typical hazards include flying objects and particles, splashing liquids, molten metal, and ultraviolet, visible, and infrared radiation, but do not include X-rays, gamma rays, high-energy particulate radiation, radioactive materials, or masers.

REACH is a regulation of the European Union, adopted to improve the protection of human health and the environment from the risks that can be posed by chemicals, while enhancing the competitiveness of the EU chemicals industry. It also promotes alternative methods for the hazard assessment of substances in order to reduce the number of tests on animals. 

CE marking is an administrative marking that indicates conformity with health, safety, and environmental protection standards for products sold within the European Economic Area (EEA). It is not a quality indicator or a certification mark. The CE marking is also found on products sold outside the EEA that have been manufactured to EEA standards. This makes the CE marking recognizable worldwide even to people who are not familiar with the European Economic Area. It is in that sense like the FCC Declaration of Conformity used for selling certain electronic devices in the United States.

ANSI Z87.1 Safety Glasses Such markings relay adherence to the minimum requirements laid out in the ANSI Z87.1 standard. Marking specifications are outlined in ANSI/ISEA Z87.1-2020, but this document covers a range of information, setting forth criteria related to the requirements, testing, permanent marking, selection, care, and use of protectors to minimize the occurrence and severity or prevention of injuries.

This European Standard specifies functional requirements for various types of personal eye-protectors and incorporates general considerations such as: designation, classification, basic requirements applicable to all eye-protectors, various particular and optional reqiurements, allocation of requirements, testing and application, marking, information for users.

REACH is a regulation of the European Union, adopted to improve the protection of human health and the environment from the risks that can be posed by chemicals, while enhancing the competitiveness of the EU chemicals industry. It also promotes alternative methods for the hazard assessment of substances in order to reduce the number of tests on animals. 

CE marking is an administrative marking that indicates conformity with health, safety, and environmental protection standards for products sold within the European Economic Area (EEA). It is not a quality indicator or a certification mark. The CE marking is also found on products sold outside the EEA that have been manufactured to EEA standards. This makes the CE marking recognizable worldwide even to people who are not familiar with the European Economic Area. It is in that sense like the FCC Declaration of Conformity used for selling certain electronic devices in the United States.

ANSI Z87.1 Safety Glasses Such markings relay adherence to the minimum requirements laid out in the ANSI Z87.1 standard. Marking specifications are outlined in ANSI/ISEA Z87.1-2020, but this document covers a range of information, setting forth criteria related to the requirements, testing, permanent marking, selection, care, and use of protectors to minimize the occurrence and severity or prevention of injuries.

This European Standard specifies functional requirements for various types of personal eye-protectors and incorporates general considerations such as: designation, classification, basic requirements applicable to all eye-protectors, various particular and optional reqiurements, allocation of requirements, testing and application, marking, information for users.

REACH is a regulation of the European Union, adopted to improve the protection of human health and the environment from the risks that can be posed by chemicals, while enhancing the competitiveness of the EU chemicals industry. It also promotes alternative methods for the hazard assessment of substances in order to reduce the number of tests on animals. 

CE marking is an administrative marking that indicates conformity with health, safety, and environmental protection standards for products sold within the European Economic Area (EEA). It is not a quality indicator or a certification mark. The CE marking is also found on products sold outside the EEA that have been manufactured to EEA standards. This makes the CE marking recognizable worldwide even to people who are not familiar with the European Economic Area. It is in that sense like the FCC Declaration of Conformity used for selling certain electronic devices in the United States.

ANSI Z87.1 Safety Glasses Such markings relay adherence to the minimum requirements laid out in the ANSI Z87.1 standard. Marking specifications are outlined in ANSI/ISEA Z87.1-2020, but this document covers a range of information, setting forth criteria related to the requirements, testing, permanent marking, selection, care, and use of protectors to minimize the occurrence and severity or prevention of injuries.

This European Standard specifies functional requirements for various types of personal eye-protectors and incorporates general considerations such as: designation, classification, basic requirements applicable to all eye-protectors, various particular and optional reqiurements, allocation of requirements, testing and application, marking, information for users.

Proposition 65 requires businesses to provide warnings to Californians about significant exposures to chemicals that cause cancer, birth defects or other reproductive harm. These chemicals can be in the products that Californians purchase, in their homes or workplaces, or that are released into the environment. By requiring that this information be provided, Proposition 65 enables Californians to make informed decisions about their exposures to these chemicals. Proposition 65 also prohibits California businesses from knowingly discharging significant amounts of listed chemicals into sources of drinking water.

CE marking is an administrative marking that indicates conformity with health, safety, and environmental protection standards for products sold within the European Economic Area (EEA). It is not a quality indicator or a certification mark. The CE marking is also found on products sold outside the EEA that have been manufactured to EEA standards. This makes the CE marking recognizable worldwide even to people who are not familiar with the European Economic Area. It is in that sense like the FCC Declaration of Conformity used for selling certain electronic devices in the United States.

ANSI Z87.1 Safety Glasses Such markings relay adherence to the minimum requirements laid out in the ANSI Z87.1 standard. Marking specifications are outlined in ANSI/ISEA Z87.1-2020, but this document covers a range of information, setting forth criteria related to the requirements, testing, permanent marking, selection, care, and use of protectors to minimize the occurrence and severity or prevention of injuries.

The RoHS Directive specify the limits on the use of lead, mercury, cadmium, hexavalent chromium, PBB and PBDEs in electrical and electronic equipment.

REACH is a regulation of the European Union, adopted to improve the protection of human health and the environment from the risks that can be posed by chemicals, while enhancing the competitiveness of the EU chemicals industry. It also promotes alternative methods for the hazard assessment of substances in order to reduce the number of tests on animals. 

The RoHS Directive specify the limits on the use of lead, mercury, cadmium, hexavalent chromium, PBB and PBDEs in electrical and electronic equipment.

REACH is a regulation of the European Union, adopted to improve the protection of human health and the environment from the risks that can be posed by chemicals, while enhancing the competitiveness of the EU chemicals industry. It also promotes alternative methods for the hazard assessment of substances in order to reduce the number of tests on animals. 

The RoHS Directive specify the limits on the use of lead, mercury, cadmium, hexavalent chromium, PBB and PBDEs in electrical and electronic equipment.

REACH is a regulation of the European Union, adopted to improve the protection of human health and the environment from the risks that can be posed by chemicals, while enhancing the competitiveness of the EU chemicals industry. It also promotes alternative methods for the hazard assessment of substances in order to reduce the number of tests on animals. 

The RoHS Directive specify the limits on the use of lead, mercury, cadmium, hexavalent chromium, PBB and PBDEs in electrical and electronic equipment.

REACH is a regulation of the European Union, adopted to improve the protection of human health and the environment from the risks that can be posed by chemicals, while enhancing the competitiveness of the EU chemicals industry. It also promotes alternative methods for the hazard assessment of substances in order to reduce the number of tests on animals. 

The RoHS Directive specify the limits on the use of lead, mercury, cadmium, hexavalent chromium, PBB and PBDEs in electrical and electronic equipment.

REACH is a regulation of the European Union, adopted to improve the protection of human health and the environment from the risks that can be posed by chemicals, while enhancing the competitiveness of the EU chemicals industry. It also promotes alternative methods for the hazard assessment of substances in order to reduce the number of tests on animals. 

The RoHS Directive specify the limits on the use of lead, mercury, cadmium, hexavalent chromium, PBB and PBDEs in electrical and electronic equipment.

REACH is a regulation of the European Union, adopted to improve the protection of human health and the environment from the risks that can be posed by chemicals, while enhancing the competitiveness of the EU chemicals industry. It also promotes alternative methods for the hazard assessment of substances in order to reduce the number of tests on animals. 

The RoHS Directive specify the limits on the use of lead, mercury, cadmium, hexavalent chromium, PBB and PBDEs in electrical and electronic equipment.

REACH is a regulation of the European Union, adopted to improve the protection of human health and the environment from the risks that can be posed by chemicals, while enhancing the competitiveness of the EU chemicals industry. It also promotes alternative methods for the hazard assessment of substances in order to reduce the number of tests on animals. 

The RoHS Directive specify the limits on the use of lead, mercury, cadmium, hexavalent chromium, PBB and PBDEs in electrical and electronic equipment.

REACH is a regulation of the European Union, adopted to improve the protection of human health and the environment from the risks that can be posed by chemicals, while enhancing the competitiveness of the EU chemicals industry. It also promotes alternative methods for the hazard assessment of substances in order to reduce the number of tests on animals. 

The RoHS Directive specify the limits on the use of lead, mercury, cadmium, hexavalent chromium, PBB and PBDEs in electrical and electronic equipment.

REACH is a regulation of the European Union, adopted to improve the protection of human health and the environment from the risks that can be posed by chemicals, while enhancing the competitiveness of the EU chemicals industry. It also promotes alternative methods for the hazard assessment of substances in order to reduce the number of tests on animals. 

CE marking is an administrative marking that indicates conformity with health, safety, and environmental protection standards for products sold within the European Economic Area (EEA). It is not a quality indicator or a certification mark. The CE marking is also found on products sold outside the EEA that have been manufactured to EEA standards. This makes the CE marking recognizable worldwide even to people who are not familiar with the European Economic Area. It is in that sense like the FCC Declaration of Conformity used for selling certain electronic devices in the United States.

ANSI Z87.1 Safety Glasses Such markings relay adherence to the minimum requirements laid out in the ANSI Z87.1 standard. Marking specifications are outlined in ANSI/ISEA Z87.1-2020, but this document covers a range of information, setting forth criteria related to the requirements, testing, permanent marking, selection, care, and use of protectors to minimize the occurrence and severity or prevention of injuries.

This Standard applies to eye and face protectors used in all occupational and educational operations or processes involving hazards to the eyes or face. Typical hazards include flying objects and particles, splashing liquids, molten metal, and ultraviolet, visible, and infrared radiation, but do not include X-rays, gamma rays, high-energy particulate radiation, radioactive materials, or masers.

CE marking is an administrative marking that indicates conformity with health, safety, and environmental protection standards for products sold within the European Economic Area (EEA). It is not a quality indicator or a certification mark. The CE marking is also found on products sold outside the EEA that have been manufactured to EEA standards. This makes the CE marking recognizable worldwide even to people who are not familiar with the European Economic Area. It is in that sense like the FCC Declaration of Conformity used for selling certain electronic devices in the United States.

ANSI Z87.1 Safety Glasses Such markings relay adherence to the minimum requirements laid out in the ANSI Z87.1 standard. Marking specifications are outlined in ANSI/ISEA Z87.1-2020, but this document covers a range of information, setting forth criteria related to the requirements, testing, permanent marking, selection, care, and use of protectors to minimize the occurrence and severity or prevention of injuries.

This Standard applies to eye and face protectors used in all occupational and educational operations or processes involving hazards to the eyes or face. Typical hazards include flying objects and particles, splashing liquids, molten metal, and ultraviolet, visible, and infrared radiation, but do not include X-rays, gamma rays, high-energy particulate radiation, radioactive materials, or masers.

CE marking is an administrative marking that indicates conformity with health, safety, and environmental protection standards for products sold within the European Economic Area (EEA). It is not a quality indicator or a certification mark. The CE marking is also found on products sold outside the EEA that have been manufactured to EEA standards. This makes the CE marking recognizable worldwide even to people who are not familiar with the European Economic Area. It is in that sense like the FCC Declaration of Conformity used for selling certain electronic devices in the United States.

ANSI Z87.1 Safety Glasses Such markings relay adherence to the minimum requirements laid out in the ANSI Z87.1 standard. Marking specifications are outlined in ANSI/ISEA Z87.1-2020, but this document covers a range of information, setting forth criteria related to the requirements, testing, permanent marking, selection, care, and use of protectors to minimize the occurrence and severity or prevention of injuries.

This Standard applies to eye and face protectors used in all occupational and educational operations or processes involving hazards to the eyes or face. Typical hazards include flying objects and particles, splashing liquids, molten metal, and ultraviolet, visible, and infrared radiation, but do not include X-rays, gamma rays, high-energy particulate radiation, radioactive materials, or masers.

CE marking is an administrative marking that indicates conformity with health, safety, and environmental protection standards for products sold within the European Economic Area (EEA). It is not a quality indicator or a certification mark. The CE marking is also found on products sold outside the EEA that have been manufactured to EEA standards. This makes the CE marking recognizable worldwide even to people who are not familiar with the European Economic Area. It is in that sense like the FCC Declaration of Conformity used for selling certain electronic devices in the United States.

ANSI Z87.1 Safety Glasses Such markings relay adherence to the minimum requirements laid out in the ANSI Z87.1 standard. Marking specifications are outlined in ANSI/ISEA Z87.1-2020, but this document covers a range of information, setting forth criteria related to the requirements, testing, permanent marking, selection, care, and use of protectors to minimize the occurrence and severity or prevention of injuries.

This Standard applies to eye and face protectors used in all occupational and educational operations or processes involving hazards to the eyes or face. Typical hazards include flying objects and particles, splashing liquids, molten metal, and ultraviolet, visible, and infrared radiation, but do not include X-rays, gamma rays, high-energy particulate radiation, radioactive materials, or masers.

CE marking is an administrative marking that indicates conformity with health, safety, and environmental protection standards for products sold within the European Economic Area (EEA). It is not a quality indicator or a certification mark. The CE marking is also found on products sold outside the EEA that have been manufactured to EEA standards. This makes the CE marking recognizable worldwide even to people who are not familiar with the European Economic Area. It is in that sense like the FCC Declaration of Conformity used for selling certain electronic devices in the United States.

ANSI Z87.1 Safety Glasses Such markings relay adherence to the minimum requirements laid out in the ANSI Z87.1 standard. Marking specifications are outlined in ANSI/ISEA Z87.1-2020, but this document covers a range of information, setting forth criteria related to the requirements, testing, permanent marking, selection, care, and use of protectors to minimize the occurrence and severity or prevention of injuries.

This Standard applies to eye and face protectors used in all occupational and educational operations or processes involving hazards to the eyes or face. Typical hazards include flying objects and particles, splashing liquids, molten metal, and ultraviolet, visible, and infrared radiation, but do not include X-rays, gamma rays, high-energy particulate radiation, radioactive materials, or masers.

CE marking is an administrative marking that indicates conformity with health, safety, and environmental protection standards for products sold within the European Economic Area (EEA). It is not a quality indicator or a certification mark. The CE marking is also found on products sold outside the EEA that have been manufactured to EEA standards. This makes the CE marking recognizable worldwide even to people who are not familiar with the European Economic Area. It is in that sense like the FCC Declaration of Conformity used for selling certain electronic devices in the United States.

ANSI Z87.1 Safety Glasses Such markings relay adherence to the minimum requirements laid out in the ANSI Z87.1 standard. Marking specifications are outlined in ANSI/ISEA Z87.1-2020, but this document covers a range of information, setting forth criteria related to the requirements, testing, permanent marking, selection, care, and use of protectors to minimize the occurrence and severity or prevention of injuries.

This Standard applies to eye and face protectors used in all occupational and educational operations or processes involving hazards to the eyes or face. Typical hazards include flying objects and particles, splashing liquids, molten metal, and ultraviolet, visible, and infrared radiation, but do not include X-rays, gamma rays, high-energy particulate radiation, radioactive materials, or masers.

The RoHS Directive specify the limits on the use of lead, mercury, cadmium, hexavalent chromium, PBB and PBDEs in electrical and electronic equipment.

REACH is a regulation of the European Union, adopted to improve the protection of human health and the environment from the risks that can be posed by chemicals, while enhancing the competitiveness of the EU chemicals industry. It also promotes alternative methods for the hazard assessment of substances in order to reduce the number of tests on animals. 

The RoHS Directive specify the limits on the use of lead, mercury, cadmium, hexavalent chromium, PBB and PBDEs in electrical and electronic equipment.

REACH is a regulation of the European Union, adopted to improve the protection of human health and the environment from the risks that can be posed by chemicals, while enhancing the competitiveness of the EU chemicals industry. It also promotes alternative methods for the hazard assessment of substances in order to reduce the number of tests on animals. 

The RoHS Directive specify the limits on the use of lead, mercury, cadmium, hexavalent chromium, PBB and PBDEs in electrical and electronic equipment.

REACH is a regulation of the European Union, adopted to improve the protection of human health and the environment from the risks that can be posed by chemicals, while enhancing the competitiveness of the EU chemicals industry. It also promotes alternative methods for the hazard assessment of substances in order to reduce the number of tests on animals. 

The RoHS Directive specify the limits on the use of lead, mercury, cadmium, hexavalent chromium, PBB and PBDEs in electrical and electronic equipment.

REACH is a regulation of the European Union, adopted to improve the protection of human health and the environment from the risks that can be posed by chemicals, while enhancing the competitiveness of the EU chemicals industry. It also promotes alternative methods for the hazard assessment of substances in order to reduce the number of tests on animals. 

The RoHS Directive specify the limits on the use of lead, mercury, cadmium, hexavalent chromium, PBB and PBDEs in electrical and electronic equipment.

REACH is a regulation of the European Union, adopted to improve the protection of human health and the environment from the risks that can be posed by chemicals, while enhancing the competitiveness of the EU chemicals industry. It also promotes alternative methods for the hazard assessment of substances in order to reduce the number of tests on animals. 

The RoHS Directive specify the limits on the use of lead, mercury, cadmium, hexavalent chromium, PBB and PBDEs in electrical and electronic equipment.

REACH is a regulation of the European Union, adopted to improve the protection of human health and the environment from the risks that can be posed by chemicals, while enhancing the competitiveness of the EU chemicals industry. It also promotes alternative methods for the hazard assessment of substances in order to reduce the number of tests on animals. 

The RoHS Directive specify the limits on the use of lead, mercury, cadmium, hexavalent chromium, PBB and PBDEs in electrical and electronic equipment.

REACH is a regulation of the European Union, adopted to improve the protection of human health and the environment from the risks that can be posed by chemicals, while enhancing the competitiveness of the EU chemicals industry. It also promotes alternative methods for the hazard assessment of substances in order to reduce the number of tests on animals. 

The RoHS Directive specify the limits on the use of lead, mercury, cadmium, hexavalent chromium, PBB and PBDEs in electrical and electronic equipment.

REACH is a regulation of the European Union, adopted to improve the protection of human health and the environment from the risks that can be posed by chemicals, while enhancing the competitiveness of the EU chemicals industry. It also promotes alternative methods for the hazard assessment of substances in order to reduce the number of tests on animals. 

The RoHS Directive specify the limits on the use of lead, mercury, cadmium, hexavalent chromium, PBB and PBDEs in electrical and electronic equipment.

REACH is a regulation of the European Union, adopted to improve the protection of human health and the environment from the risks that can be posed by chemicals, while enhancing the competitiveness of the EU chemicals industry. It also promotes alternative methods for the hazard assessment of substances in order to reduce the number of tests on animals. 

The RoHS Directive specify the limits on the use of lead, mercury, cadmium, hexavalent chromium, PBB and PBDEs in electrical and electronic equipment.

REACH is a regulation of the European Union, adopted to improve the protection of human health and the environment from the risks that can be posed by chemicals, while enhancing the competitiveness of the EU chemicals industry. It also promotes alternative methods for the hazard assessment of substances in order to reduce the number of tests on animals. 

The RoHS Directive specify the limits on the use of lead, mercury, cadmium, hexavalent chromium, PBB and PBDEs in electrical and electronic equipment.

REACH is a regulation of the European Union, adopted to improve the protection of human health and the environment from the risks that can be posed by chemicals, while enhancing the competitiveness of the EU chemicals industry. It also promotes alternative methods for the hazard assessment of substances in order to reduce the number of tests on animals. 

The UL Listing Mark is one of the most common UL Marks. If a product carries this Mark, it means UL found that representative product samples met UL's safety requirements. These requirements are primarily based on UL's own published standards for safety.

ANSI Z87.1 Safety Glasses Such markings relay adherence to the minimum requirements laid out in the ANSI Z87.1 standard. Marking specifications are outlined in ANSI/ISEA Z87.1-2020, but this document covers a range of information, setting forth criteria related to the requirements, testing, permanent marking, selection, care, and use of protectors to minimize the occurrence and severity or prevention of injuries.

This Standard applies to eye and face protectors used in all occupational and educational operations or processes involving hazards to the eyes or face. Typical hazards include flying objects and particles, splashing liquids, molten metal, and ultraviolet, visible, and infrared radiation, but do not include X-rays, gamma rays, high-energy particulate radiation, radioactive materials, or masers.

The UL Listing Mark is one of the most common UL Marks. If a product carries this Mark, it means UL found that representative product samples met UL's safety requirements. These requirements are primarily based on UL's own published standards for safety.

ANSI Z87.1 Safety Glasses Such markings relay adherence to the minimum requirements laid out in the ANSI Z87.1 standard. Marking specifications are outlined in ANSI/ISEA Z87.1-2020, but this document covers a range of information, setting forth criteria related to the requirements, testing, permanent marking, selection, care, and use of protectors to minimize the occurrence and severity or prevention of injuries.

This Standard applies to eye and face protectors used in all occupational and educational operations or processes involving hazards to the eyes or face. Typical hazards include flying objects and particles, splashing liquids, molten metal, and ultraviolet, visible, and infrared radiation, but do not include X-rays, gamma rays, high-energy particulate radiation, radioactive materials, or masers.

The UL Listing Mark is one of the most common UL Marks. If a product carries this Mark, it means UL found that representative product samples met UL's safety requirements. These requirements are primarily based on UL's own published standards for safety.

ANSI Z87.1 Safety Glasses Such markings relay adherence to the minimum requirements laid out in the ANSI Z87.1 standard. Marking specifications are outlined in ANSI/ISEA Z87.1-2020, but this document covers a range of information, setting forth criteria related to the requirements, testing, permanent marking, selection, care, and use of protectors to minimize the occurrence and severity or prevention of injuries.

This Standard applies to eye and face protectors used in all occupational and educational operations or processes involving hazards to the eyes or face. Typical hazards include flying objects and particles, splashing liquids, molten metal, and ultraviolet, visible, and infrared radiation, but do not include X-rays, gamma rays, high-energy particulate radiation, radioactive materials, or masers.

The UL Listing Mark is one of the most common UL Marks. If a product carries this Mark, it means UL found that representative product samples met UL's safety requirements. These requirements are primarily based on UL's own published standards for safety.

ANSI Z87.1 Safety Glasses Such markings relay adherence to the minimum requirements laid out in the ANSI Z87.1 standard. Marking specifications are outlined in ANSI/ISEA Z87.1-2020, but this document covers a range of information, setting forth criteria related to the requirements, testing, permanent marking, selection, care, and use of protectors to minimize the occurrence and severity or prevention of injuries.

This Standard applies to eye and face protectors used in all occupational and educational operations or processes involving hazards to the eyes or face. Typical hazards include flying objects and particles, splashing liquids, molten metal, and ultraviolet, visible, and infrared radiation, but do not include X-rays, gamma rays, high-energy particulate radiation, radioactive materials, or masers.

Proposition 65 requires businesses to provide warnings to Californians about significant exposures to chemicals that cause cancer, birth defects or other reproductive harm. These chemicals can be in the products that Californians purchase, in their homes or workplaces, or that are released into the environment. By requiring that this information be provided, Proposition 65 enables Californians to make informed decisions about their exposures to these chemicals. Proposition 65 also prohibits California businesses from knowingly discharging significant amounts of listed chemicals into sources of drinking water.

ANSI Z87.1 Safety Glasses Such markings relay adherence to the minimum requirements laid out in the ANSI Z87.1 standard. Marking specifications are outlined in ANSI/ISEA Z87.1-2020, but this document covers a range of information, setting forth criteria related to the requirements, testing, permanent marking, selection, care, and use of protectors to minimize the occurrence and severity or prevention of injuries.