Managed by the Global Electronics Council (GEC), the EPEAT ecolabel covers products and services from the technology sector. Silver-rated products meet all the required criteria plus at least 50% of the optional criteria.

Managed by the Global Electronics Council (GEC), the EPEAT ecolabel covers products and services from the technology sector. Bronze-rated products meet all the required criteria in each EPEAT product category.

ENERGY STAR products are the same or better than standard products, only they use less energy. To earn the ENERGY STAR, they must meet strict energy efficiency criteria set by the US Environmental Protection Agency or the US Department of Energy.

REACH is a regulation of the European Union, adopted to improve the protection of human health and the environment from the risks that can be posed by chemicals, while enhancing the competitiveness of the EU chemicals industry. It also promotes alternative methods for the hazard assessment of substances in order to reduce the number of tests on animals. 

The RoHS Directive specify the limits on the use of lead, mercury, cadmium, hexavalent chromium, PBB and PBDEs in electrical and electronic equipment. **Why is RoHS compliance important?** The restricted materials are hazardous to the environment and pollute landfills, and are dangerous in terms of occupational exposure during manufacturing and recycling.

Managed by the Global Electronics Council (GEC), the EPEAT ecolabel covers products and services from the technology sector. Silver-rated products meet all the required criteria plus at least 50% of the optional criteria.

Managed by the Global Electronics Council (GEC), the EPEAT ecolabel covers products and services from the technology sector. Bronze-rated products meet all the required criteria in each EPEAT product category.

ENERGY STAR products are the same or better than standard products, only they use less energy. To earn the ENERGY STAR, they must meet strict energy efficiency criteria set by the US Environmental Protection Agency or the US Department of Energy.

REACH is a regulation of the European Union, adopted to improve the protection of human health and the environment from the risks that can be posed by chemicals, while enhancing the competitiveness of the EU chemicals industry. It also promotes alternative methods for the hazard assessment of substances in order to reduce the number of tests on animals. 

The RoHS Directive specify the limits on the use of lead, mercury, cadmium, hexavalent chromium, PBB and PBDEs in electrical and electronic equipment. **Why is RoHS compliance important?** The restricted materials are hazardous to the environment and pollute landfills, and are dangerous in terms of occupational exposure during manufacturing and recycling.

Managed by the Global Electronics Council (GEC), the EPEAT ecolabel covers products and services from the technology sector. Silver-rated products meet all the required criteria plus at least 50% of the optional criteria.

Managed by the Global Electronics Council (GEC), the EPEAT ecolabel covers products and services from the technology sector. Bronze-rated products meet all the required criteria in each EPEAT product category.

ENERGY STAR products are the same or better than standard products, only they use less energy. To earn the ENERGY STAR, they must meet strict energy efficiency criteria set by the US Environmental Protection Agency or the US Department of Energy.

REACH is a regulation of the European Union, adopted to improve the protection of human health and the environment from the risks that can be posed by chemicals, while enhancing the competitiveness of the EU chemicals industry. It also promotes alternative methods for the hazard assessment of substances in order to reduce the number of tests on animals. 

The RoHS Directive specify the limits on the use of lead, mercury, cadmium, hexavalent chromium, PBB and PBDEs in electrical and electronic equipment. **Why is RoHS compliance important?** The restricted materials are hazardous to the environment and pollute landfills, and are dangerous in terms of occupational exposure during manufacturing and recycling.

Managed by the Global Electronics Council (GEC), the EPEAT ecolabel covers products and services from the technology sector. Silver-rated products meet all the required criteria plus at least 50% of the optional criteria.

Managed by the Global Electronics Council (GEC), the EPEAT ecolabel covers products and services from the technology sector. Bronze-rated products meet all the required criteria in each EPEAT product category.

ENERGY STAR products are the same or better than standard products, only they use less energy. To earn the ENERGY STAR, they must meet strict energy efficiency criteria set by the US Environmental Protection Agency or the US Department of Energy.

REACH is a regulation of the European Union, adopted to improve the protection of human health and the environment from the risks that can be posed by chemicals, while enhancing the competitiveness of the EU chemicals industry. It also promotes alternative methods for the hazard assessment of substances in order to reduce the number of tests on animals. 

The RoHS Directive specify the limits on the use of lead, mercury, cadmium, hexavalent chromium, PBB and PBDEs in electrical and electronic equipment. **Why is RoHS compliance important?** The restricted materials are hazardous to the environment and pollute landfills, and are dangerous in terms of occupational exposure during manufacturing and recycling.

Managed by the Global Electronics Council (GEC), the EPEAT ecolabel covers products and services from the technology sector. Silver-rated products meet all the required criteria plus at least 50% of the optional criteria.

Managed by the Global Electronics Council (GEC), the EPEAT ecolabel covers products and services from the technology sector. Bronze-rated products meet all the required criteria in each EPEAT product category.

ENERGY STAR products are the same or better than standard products, only they use less energy. To earn the ENERGY STAR, they must meet strict energy efficiency criteria set by the US Environmental Protection Agency or the US Department of Energy.

REACH is a regulation of the European Union, adopted to improve the protection of human health and the environment from the risks that can be posed by chemicals, while enhancing the competitiveness of the EU chemicals industry. It also promotes alternative methods for the hazard assessment of substances in order to reduce the number of tests on animals. 

The RoHS Directive specify the limits on the use of lead, mercury, cadmium, hexavalent chromium, PBB and PBDEs in electrical and electronic equipment. **Why is RoHS compliance important?** The restricted materials are hazardous to the environment and pollute landfills, and are dangerous in terms of occupational exposure during manufacturing and recycling.

Certified B Corporations are businesses that meet the highest standards of verified social and environmental performance, public transparency, and legal accountability to balance profit and purpose. B Corps are accelerating a global culture shift to redefine success in business and build a more inclusive and sustainable economy.

The Fair Trade Certified seal on a product signifies that it was made according to rigorous fair trade standards that promote sustainable livelihoods, safe working conditions, protection of the environment, and strong, transparent supply chains. When you see a product with the Fair Trade Certified seal, you can be sure it meets rigorous social, environmental, and economic standards. That means: - Safe working conditions - Environmental protection - Sustainable livelihoods - Community Development Funds

The bluesign® PRODUCT logo stands for safe textiles, environmentally friendly production and responsible use of resources. The bluesign® system excludes substances that are harmful to the environment and to health from the very beginning of the manufacturing process. All steps in the process are comprehensively monitored by independent bodies.

Managed by the Global Electronics Council (GEC), the EPEAT ecolabel covers products and services from the technology sector. Bronze-rated products meet all the required criteria in each EPEAT product category.

ENERGY STAR products are the same or better than standard products, only they use less energy. To earn the ENERGY STAR, they must meet strict energy efficiency criteria set by the US Environmental Protection Agency or the US Department of Energy.

Managed by the Global Electronics Council (GEC), the EPEAT ecolabel covers products and services from the technology sector. Gold-rated products meet all the required criteria plus at least 75% of the optional criteria.

REACH is a regulation of the European Union, adopted to improve the protection of human health and the environment from the risks that can be posed by chemicals, while enhancing the competitiveness of the EU chemicals industry. It also promotes alternative methods for the hazard assessment of substances in order to reduce the number of tests on animals. 

The RoHS Directive specify the limits on the use of lead, mercury, cadmium, hexavalent chromium, PBB and PBDEs in electrical and electronic equipment. **Why is RoHS compliance important?** The restricted materials are hazardous to the environment and pollute landfills, and are dangerous in terms of occupational exposure during manufacturing and recycling.

Managed by the Global Electronics Council (GEC), the EPEAT ecolabel covers products and services from the technology sector. Bronze-rated products meet all the required criteria in each EPEAT product category.

ENERGY STAR products are the same or better than standard products, only they use less energy. To earn the ENERGY STAR, they must meet strict energy efficiency criteria set by the US Environmental Protection Agency or the US Department of Energy.

Managed by the Global Electronics Council (GEC), the EPEAT ecolabel covers products and services from the technology sector. Gold-rated products meet all the required criteria plus at least 75% of the optional criteria.

REACH is a regulation of the European Union, adopted to improve the protection of human health and the environment from the risks that can be posed by chemicals, while enhancing the competitiveness of the EU chemicals industry. It also promotes alternative methods for the hazard assessment of substances in order to reduce the number of tests on animals. 

The RoHS Directive specify the limits on the use of lead, mercury, cadmium, hexavalent chromium, PBB and PBDEs in electrical and electronic equipment. **Why is RoHS compliance important?** The restricted materials are hazardous to the environment and pollute landfills, and are dangerous in terms of occupational exposure during manufacturing and recycling.

Managed by the Global Electronics Council (GEC), the EPEAT ecolabel covers products and services from the technology sector. Bronze-rated products meet all the required criteria in each EPEAT product category.

ENERGY STAR products are the same or better than standard products, only they use less energy. To earn the ENERGY STAR, they must meet strict energy efficiency criteria set by the US Environmental Protection Agency or the US Department of Energy.

Managed by the Global Electronics Council (GEC), the EPEAT ecolabel covers products and services from the technology sector. Gold-rated products meet all the required criteria plus at least 75% of the optional criteria.

REACH is a regulation of the European Union, adopted to improve the protection of human health and the environment from the risks that can be posed by chemicals, while enhancing the competitiveness of the EU chemicals industry. It also promotes alternative methods for the hazard assessment of substances in order to reduce the number of tests on animals. 

The RoHS Directive specify the limits on the use of lead, mercury, cadmium, hexavalent chromium, PBB and PBDEs in electrical and electronic equipment. **Why is RoHS compliance important?** The restricted materials are hazardous to the environment and pollute landfills, and are dangerous in terms of occupational exposure during manufacturing and recycling.

Managed by the Global Electronics Council (GEC), the EPEAT ecolabel covers products and services from the technology sector. Silver-rated products meet all the required criteria plus at least 50% of the optional criteria.

TCO Certified is the world’s most comprehensive sustainability certification for IT products, helping you make responsible product choices that drive the industry in a sustainable direction. Using TCO Certified also supports your organization’s efforts to reduce risk and take the next step in social and environmental responsibility.

The RoHS Directive specify the limits on the use of lead, mercury, cadmium, hexavalent chromium, PBB and PBDEs in electrical and electronic equipment.

REACH is a regulation of the European Union, adopted to improve the protection of human health and the environment from the risks that can be posed by chemicals, while enhancing the competitiveness of the EU chemicals industry. It also promotes alternative methods for the hazard assessment of substances in order to reduce the number of tests on animals. 

Managed by the Global Electronics Council (GEC), the EPEAT ecolabel covers products and services from the technology sector. Silver-rated products meet all the required criteria plus at least 50% of the optional criteria.

Managed by the Global Electronics Council (GEC), the EPEAT ecolabel covers products and services from the technology sector. Bronze-rated products meet all the required criteria in each EPEAT product category.

ENERGY STAR products are the same or better than standard products, only they use less energy. To earn the ENERGY STAR, they must meet strict energy efficiency criteria set by the US Environmental Protection Agency or the US Department of Energy.

REACH is a regulation of the European Union, adopted to improve the protection of human health and the environment from the risks that can be posed by chemicals, while enhancing the competitiveness of the EU chemicals industry. It also promotes alternative methods for the hazard assessment of substances in order to reduce the number of tests on animals. 

The RoHS Directive specify the limits on the use of lead, mercury, cadmium, hexavalent chromium, PBB and PBDEs in electrical and electronic equipment. **Why is RoHS compliance important?** The restricted materials are hazardous to the environment and pollute landfills, and are dangerous in terms of occupational exposure during manufacturing and recycling.

Managed by the Global Electronics Council (GEC), the EPEAT ecolabel covers products and services from the technology sector. Bronze-rated products meet all the required criteria in each EPEAT product category.

ENERGY STAR products are the same or better than standard products, only they use less energy. To earn the ENERGY STAR, they must meet strict energy efficiency criteria set by the US Environmental Protection Agency or the US Department of Energy.

Managed by the Global Electronics Council (GEC), the EPEAT ecolabel covers products and services from the technology sector. Gold-rated products meet all the required criteria plus at least 75% of the optional criteria.

REACH is a regulation of the European Union, adopted to improve the protection of human health and the environment from the risks that can be posed by chemicals, while enhancing the competitiveness of the EU chemicals industry. It also promotes alternative methods for the hazard assessment of substances in order to reduce the number of tests on animals. 

The RoHS Directive specify the limits on the use of lead, mercury, cadmium, hexavalent chromium, PBB and PBDEs in electrical and electronic equipment. **Why is RoHS compliance important?** The restricted materials are hazardous to the environment and pollute landfills, and are dangerous in terms of occupational exposure during manufacturing and recycling.

Managed by the Global Electronics Council (GEC), the EPEAT ecolabel covers products and services from the technology sector. Bronze-rated products meet all the required criteria in each EPEAT product category.

ENERGY STAR products are the same or better than standard products, only they use less energy. To earn the ENERGY STAR, they must meet strict energy efficiency criteria set by the US Environmental Protection Agency or the US Department of Energy.

Managed by the Global Electronics Council (GEC), the EPEAT ecolabel covers products and services from the technology sector. Gold-rated products meet all the required criteria plus at least 75% of the optional criteria.

REACH is a regulation of the European Union, adopted to improve the protection of human health and the environment from the risks that can be posed by chemicals, while enhancing the competitiveness of the EU chemicals industry. It also promotes alternative methods for the hazard assessment of substances in order to reduce the number of tests on animals. 

The RoHS Directive specify the limits on the use of lead, mercury, cadmium, hexavalent chromium, PBB and PBDEs in electrical and electronic equipment. **Why is RoHS compliance important?** The restricted materials are hazardous to the environment and pollute landfills, and are dangerous in terms of occupational exposure during manufacturing and recycling.

Managed by the Global Electronics Council (GEC), the EPEAT ecolabel covers products and services from the technology sector. Bronze-rated products meet all the required criteria in each EPEAT product category.

ENERGY STAR products are the same or better than standard products, only they use less energy. To earn the ENERGY STAR, they must meet strict energy efficiency criteria set by the US Environmental Protection Agency or the US Department of Energy.

Managed by the Global Electronics Council (GEC), the EPEAT ecolabel covers products and services from the technology sector. Gold-rated products meet all the required criteria plus at least 75% of the optional criteria.

REACH is a regulation of the European Union, adopted to improve the protection of human health and the environment from the risks that can be posed by chemicals, while enhancing the competitiveness of the EU chemicals industry. It also promotes alternative methods for the hazard assessment of substances in order to reduce the number of tests on animals. 

The RoHS Directive specify the limits on the use of lead, mercury, cadmium, hexavalent chromium, PBB and PBDEs in electrical and electronic equipment. **Why is RoHS compliance important?** The restricted materials are hazardous to the environment and pollute landfills, and are dangerous in terms of occupational exposure during manufacturing and recycling.

Managed by the Global Electronics Council (GEC), the EPEAT ecolabel covers products and services from the technology sector. Bronze-rated products meet all the required criteria in each EPEAT product category.

ENERGY STAR products are the same or better than standard products, only they use less energy. To earn the ENERGY STAR, they must meet strict energy efficiency criteria set by the US Environmental Protection Agency or the US Department of Energy.

Managed by the Global Electronics Council (GEC), the EPEAT ecolabel covers products and services from the technology sector. Gold-rated products meet all the required criteria plus at least 75% of the optional criteria.

REACH is a regulation of the European Union, adopted to improve the protection of human health and the environment from the risks that can be posed by chemicals, while enhancing the competitiveness of the EU chemicals industry. It also promotes alternative methods for the hazard assessment of substances in order to reduce the number of tests on animals. 

The RoHS Directive specify the limits on the use of lead, mercury, cadmium, hexavalent chromium, PBB and PBDEs in electrical and electronic equipment. **Why is RoHS compliance important?** The restricted materials are hazardous to the environment and pollute landfills, and are dangerous in terms of occupational exposure during manufacturing and recycling.

Managed by the Global Electronics Council (GEC), the EPEAT ecolabel covers products and services from the technology sector. Bronze-rated products meet all the required criteria in each EPEAT product category.

ENERGY STAR products are the same or better than standard products, only they use less energy. To earn the ENERGY STAR, they must meet strict energy efficiency criteria set by the US Environmental Protection Agency or the US Department of Energy.

Managed by the Global Electronics Council (GEC), the EPEAT ecolabel covers products and services from the technology sector. Gold-rated products meet all the required criteria plus at least 75% of the optional criteria.

REACH is a regulation of the European Union, adopted to improve the protection of human health and the environment from the risks that can be posed by chemicals, while enhancing the competitiveness of the EU chemicals industry. It also promotes alternative methods for the hazard assessment of substances in order to reduce the number of tests on animals. 

The RoHS Directive specify the limits on the use of lead, mercury, cadmium, hexavalent chromium, PBB and PBDEs in electrical and electronic equipment. **Why is RoHS compliance important?** The restricted materials are hazardous to the environment and pollute landfills, and are dangerous in terms of occupational exposure during manufacturing and recycling.

Managed by the Global Electronics Council (GEC), the EPEAT ecolabel covers products and services from the technology sector. Bronze-rated products meet all the required criteria in each EPEAT product category.

ENERGY STAR products are the same or better than standard products, only they use less energy. To earn the ENERGY STAR, they must meet strict energy efficiency criteria set by the US Environmental Protection Agency or the US Department of Energy.

Managed by the Global Electronics Council (GEC), the EPEAT ecolabel covers products and services from the technology sector. Gold-rated products meet all the required criteria plus at least 75% of the optional criteria.

REACH is a regulation of the European Union, adopted to improve the protection of human health and the environment from the risks that can be posed by chemicals, while enhancing the competitiveness of the EU chemicals industry. It also promotes alternative methods for the hazard assessment of substances in order to reduce the number of tests on animals. 

The RoHS Directive specify the limits on the use of lead, mercury, cadmium, hexavalent chromium, PBB and PBDEs in electrical and electronic equipment. **Why is RoHS compliance important?** The restricted materials are hazardous to the environment and pollute landfills, and are dangerous in terms of occupational exposure during manufacturing and recycling.

Managed by the Global Electronics Council (GEC), the EPEAT ecolabel covers products and services from the technology sector. Bronze-rated products meet all the required criteria in each EPEAT product category.

Managed by the Global Electronics Council (GEC), the EPEAT ecolabel covers products and services from the technology sector. Gold-rated products meet all the required criteria plus at least 75% of the optional criteria.

FSC MIX labels identify products which are made with a combination of FSC virgin fiber, and/or recycled materials with Controlled virgin fiber. The mobius loop represents the total pre and post consumer recycled fiber.

The RoHS Directive specify the limits on the use of lead, mercury, cadmium, hexavalent chromium, PBB and PBDEs in electrical and electronic equipment. **Why is RoHS compliance important?** The restricted materials are hazardous to the environment and pollute landfills, and are dangerous in terms of occupational exposure during manufacturing and recycling.

Managed by the Global Electronics Council (GEC), the EPEAT ecolabel covers products and services from the technology sector. Silver-rated products meet all the required criteria plus at least 50% of the optional criteria.

Managed by the Global Electronics Council (GEC), the EPEAT ecolabel covers products and services from the technology sector. Bronze-rated products meet all the required criteria in each EPEAT product category.

ENERGY STAR products are the same or better than standard products, only they use less energy. To earn the ENERGY STAR, they must meet strict energy efficiency criteria set by the US Environmental Protection Agency or the US Department of Energy.

REACH is a regulation of the European Union, adopted to improve the protection of human health and the environment from the risks that can be posed by chemicals, while enhancing the competitiveness of the EU chemicals industry. It also promotes alternative methods for the hazard assessment of substances in order to reduce the number of tests on animals. 

The RoHS Directive specify the limits on the use of lead, mercury, cadmium, hexavalent chromium, PBB and PBDEs in electrical and electronic equipment. **Why is RoHS compliance important?** The restricted materials are hazardous to the environment and pollute landfills, and are dangerous in terms of occupational exposure during manufacturing and recycling.

Managed by the Global Electronics Council (GEC), the EPEAT ecolabel covers products and services from the technology sector. Silver-rated products meet all the required criteria plus at least 50% of the optional criteria.

Managed by the Global Electronics Council (GEC), the EPEAT ecolabel covers products and services from the technology sector. Bronze-rated products meet all the required criteria in each EPEAT product category.

ENERGY STAR products are the same or better than standard products, only they use less energy. To earn the ENERGY STAR, they must meet strict energy efficiency criteria set by the US Environmental Protection Agency or the US Department of Energy.

REACH is a regulation of the European Union, adopted to improve the protection of human health and the environment from the risks that can be posed by chemicals, while enhancing the competitiveness of the EU chemicals industry. It also promotes alternative methods for the hazard assessment of substances in order to reduce the number of tests on animals. 

The RoHS Directive specify the limits on the use of lead, mercury, cadmium, hexavalent chromium, PBB and PBDEs in electrical and electronic equipment. **Why is RoHS compliance important?** The restricted materials are hazardous to the environment and pollute landfills, and are dangerous in terms of occupational exposure during manufacturing and recycling.

Managed by the Global Electronics Council (GEC), the EPEAT ecolabel covers products and services from the technology sector. Silver-rated products meet all the required criteria plus at least 50% of the optional criteria.

Managed by the Global Electronics Council (GEC), the EPEAT ecolabel covers products and services from the technology sector. Bronze-rated products meet all the required criteria in each EPEAT product category.

ENERGY STAR products are the same or better than standard products, only they use less energy. To earn the ENERGY STAR, they must meet strict energy efficiency criteria set by the US Environmental Protection Agency or the US Department of Energy.

REACH is a regulation of the European Union, adopted to improve the protection of human health and the environment from the risks that can be posed by chemicals, while enhancing the competitiveness of the EU chemicals industry. It also promotes alternative methods for the hazard assessment of substances in order to reduce the number of tests on animals. 

The RoHS Directive specify the limits on the use of lead, mercury, cadmium, hexavalent chromium, PBB and PBDEs in electrical and electronic equipment. **Why is RoHS compliance important?** The restricted materials are hazardous to the environment and pollute landfills, and are dangerous in terms of occupational exposure during manufacturing and recycling.

When an electronic device has an FCC certificate, it means the product has been tested to comply with FCC standards and it has been approved. An FCC certification does not imply that the product is safe or durable. It simply means that it meets regulated limits for ionizing radiation. A certification does not imply that the device was manufactured any specific way. FCC approval can be granted as long as the electronic device meets FCC emission rules and regulations and has been tested to comply with FCC standards.

Proposition 65 requires businesses to provide warnings to Californians about significant exposures to chemicals that cause cancer, birth defects or other reproductive harm. These chemicals can be in the products that Californians purchase, in their homes or workplaces, or that are released into the environment. By requiring that this information be provided, Proposition 65 enables Californians to make informed decisions about their exposures to these chemicals. Proposition 65 also prohibits California businesses from knowingly discharging significant amounts of listed chemicals into sources of drinking water.

The RoHS Directive specify the limits on the use of lead, mercury, cadmium, hexavalent chromium, PBB and PBDEs in electrical and electronic equipment.

REACH is a regulation of the European Union, adopted to improve the protection of human health and the environment from the risks that can be posed by chemicals, while enhancing the competitiveness of the EU chemicals industry. It also promotes alternative methods for the hazard assessment of substances in order to reduce the number of tests on animals. 

CE marking is an administrative marking that indicates conformity with health, safety, and environmental protection standards for products sold within the European Economic Area (EEA). It is not a quality indicator or a certification mark. The CE marking is also found on products sold outside the EEA that have been manufactured to EEA standards. This makes the CE marking recognizable worldwide even to people who are not familiar with the European Economic Area. It is in that sense like the FCC Declaration of Conformity used for selling certain electronic devices in the United States.

Electric and electronic equipment deteriorate or malfunction when water or dust enters the device. The IEC has developed the ingress protection (IP) ratings, which grade the resistance of an enclosure against the intrusion of dust or liquids.The ratings are widely used throughout industry.

When an electronic device has an FCC certificate, it means the product has been tested to comply with FCC standards and it has been approved. An FCC certification does not imply that the product is safe or durable. It simply means that it meets regulated limits for ionizing radiation. A certification does not imply that the device was manufactured any specific way. FCC approval can be granted as long as the electronic device meets FCC emission rules and regulations and has been tested to comply with FCC standards.

Proposition 65 requires businesses to provide warnings to Californians about significant exposures to chemicals that cause cancer, birth defects or other reproductive harm. These chemicals can be in the products that Californians purchase, in their homes or workplaces, or that are released into the environment. By requiring that this information be provided, Proposition 65 enables Californians to make informed decisions about their exposures to these chemicals. Proposition 65 also prohibits California businesses from knowingly discharging significant amounts of listed chemicals into sources of drinking water.

The RoHS Directive specify the limits on the use of lead, mercury, cadmium, hexavalent chromium, PBB and PBDEs in electrical and electronic equipment.

REACH is a regulation of the European Union, adopted to improve the protection of human health and the environment from the risks that can be posed by chemicals, while enhancing the competitiveness of the EU chemicals industry. It also promotes alternative methods for the hazard assessment of substances in order to reduce the number of tests on animals. 

CE marking is an administrative marking that indicates conformity with health, safety, and environmental protection standards for products sold within the European Economic Area (EEA). It is not a quality indicator or a certification mark. The CE marking is also found on products sold outside the EEA that have been manufactured to EEA standards. This makes the CE marking recognizable worldwide even to people who are not familiar with the European Economic Area. It is in that sense like the FCC Declaration of Conformity used for selling certain electronic devices in the United States.

Electric and electronic equipment deteriorate or malfunction when water or dust enters the device. The IEC has developed the ingress protection (IP) ratings, which grade the resistance of an enclosure against the intrusion of dust or liquids.The ratings are widely used throughout industry.

When an electronic device has an FCC certificate, it means the product has been tested to comply with FCC standards and it has been approved. An FCC certification does not imply that the product is safe or durable. It simply means that it meets regulated limits for ionizing radiation. A certification does not imply that the device was manufactured any specific way. FCC approval can be granted as long as the electronic device meets FCC emission rules and regulations and has been tested to comply with FCC standards.

Proposition 65 requires businesses to provide warnings to Californians about significant exposures to chemicals that cause cancer, birth defects or other reproductive harm. These chemicals can be in the products that Californians purchase, in their homes or workplaces, or that are released into the environment. By requiring that this information be provided, Proposition 65 enables Californians to make informed decisions about their exposures to these chemicals. Proposition 65 also prohibits California businesses from knowingly discharging significant amounts of listed chemicals into sources of drinking water.

The RoHS Directive specify the limits on the use of lead, mercury, cadmium, hexavalent chromium, PBB and PBDEs in electrical and electronic equipment.

REACH is a regulation of the European Union, adopted to improve the protection of human health and the environment from the risks that can be posed by chemicals, while enhancing the competitiveness of the EU chemicals industry. It also promotes alternative methods for the hazard assessment of substances in order to reduce the number of tests on animals. 

CE marking is an administrative marking that indicates conformity with health, safety, and environmental protection standards for products sold within the European Economic Area (EEA). It is not a quality indicator or a certification mark. The CE marking is also found on products sold outside the EEA that have been manufactured to EEA standards. This makes the CE marking recognizable worldwide even to people who are not familiar with the European Economic Area. It is in that sense like the FCC Declaration of Conformity used for selling certain electronic devices in the United States.

Electric and electronic equipment deteriorate or malfunction when water or dust enters the device. The IEC has developed the ingress protection (IP) ratings, which grade the resistance of an enclosure against the intrusion of dust or liquids.The ratings are widely used throughout industry.

When an electronic device has an FCC certificate, it means the product has been tested to comply with FCC standards and it has been approved. An FCC certification does not imply that the product is safe or durable. It simply means that it meets regulated limits for ionizing radiation. A certification does not imply that the device was manufactured any specific way. FCC approval can be granted as long as the electronic device meets FCC emission rules and regulations and has been tested to comply with FCC standards.

Proposition 65 requires businesses to provide warnings to Californians about significant exposures to chemicals that cause cancer, birth defects or other reproductive harm. These chemicals can be in the products that Californians purchase, in their homes or workplaces, or that are released into the environment. By requiring that this information be provided, Proposition 65 enables Californians to make informed decisions about their exposures to these chemicals. Proposition 65 also prohibits California businesses from knowingly discharging significant amounts of listed chemicals into sources of drinking water.

The RoHS Directive specify the limits on the use of lead, mercury, cadmium, hexavalent chromium, PBB and PBDEs in electrical and electronic equipment.

REACH is a regulation of the European Union, adopted to improve the protection of human health and the environment from the risks that can be posed by chemicals, while enhancing the competitiveness of the EU chemicals industry. It also promotes alternative methods for the hazard assessment of substances in order to reduce the number of tests on animals. 

CE marking is an administrative marking that indicates conformity with health, safety, and environmental protection standards for products sold within the European Economic Area (EEA). It is not a quality indicator or a certification mark. The CE marking is also found on products sold outside the EEA that have been manufactured to EEA standards. This makes the CE marking recognizable worldwide even to people who are not familiar with the European Economic Area. It is in that sense like the FCC Declaration of Conformity used for selling certain electronic devices in the United States.

Electric and electronic equipment deteriorate or malfunction when water or dust enters the device. The IEC has developed the ingress protection (IP) ratings, which grade the resistance of an enclosure against the intrusion of dust or liquids.The ratings are widely used throughout industry.

When an electronic device has an FCC certificate, it means the product has been tested to comply with FCC standards and it has been approved. An FCC certification does not imply that the product is safe or durable. It simply means that it meets regulated limits for ionizing radiation. A certification does not imply that the device was manufactured any specific way. FCC approval can be granted as long as the electronic device meets FCC emission rules and regulations and has been tested to comply with FCC standards.

Proposition 65 requires businesses to provide warnings to Californians about significant exposures to chemicals that cause cancer, birth defects or other reproductive harm. These chemicals can be in the products that Californians purchase, in their homes or workplaces, or that are released into the environment. By requiring that this information be provided, Proposition 65 enables Californians to make informed decisions about their exposures to these chemicals. Proposition 65 also prohibits California businesses from knowingly discharging significant amounts of listed chemicals into sources of drinking water.

The RoHS Directive specify the limits on the use of lead, mercury, cadmium, hexavalent chromium, PBB and PBDEs in electrical and electronic equipment.

REACH is a regulation of the European Union, adopted to improve the protection of human health and the environment from the risks that can be posed by chemicals, while enhancing the competitiveness of the EU chemicals industry. It also promotes alternative methods for the hazard assessment of substances in order to reduce the number of tests on animals. 

CE marking is an administrative marking that indicates conformity with health, safety, and environmental protection standards for products sold within the European Economic Area (EEA). It is not a quality indicator or a certification mark. The CE marking is also found on products sold outside the EEA that have been manufactured to EEA standards. This makes the CE marking recognizable worldwide even to people who are not familiar with the European Economic Area. It is in that sense like the FCC Declaration of Conformity used for selling certain electronic devices in the United States.

Electric and electronic equipment deteriorate or malfunction when water or dust enters the device. The IEC has developed the ingress protection (IP) ratings, which grade the resistance of an enclosure against the intrusion of dust or liquids.The ratings are widely used throughout industry.

Managed by the Global Electronics Council (GEC), the EPEAT ecolabel covers products and services from the technology sector. Bronze-rated products meet all the required criteria in each EPEAT product category.

Managed by the Global Electronics Council (GEC), the EPEAT ecolabel covers products and services from the technology sector. Gold-rated products meet all the required criteria plus at least 75% of the optional criteria.

FSC MIX labels identify products which are made with a combination of FSC virgin fiber, and/or recycled materials with Controlled virgin fiber. The mobius loop represents the total pre and post consumer recycled fiber.

The RoHS Directive specify the limits on the use of lead, mercury, cadmium, hexavalent chromium, PBB and PBDEs in electrical and electronic equipment. **Why is RoHS compliance important?** The restricted materials are hazardous to the environment and pollute landfills, and are dangerous in terms of occupational exposure during manufacturing and recycling.

Certified B Corporations are businesses that meet the highest standards of verified social and environmental performance, public transparency, and legal accountability to balance profit and purpose. B Corps are accelerating a global culture shift to redefine success in business and build a more inclusive and sustainable economy.

If a textile article carries the STANDARD 100 label, you can be certain that every component of this article, i.e. every thread, button and other accessories, has been tested for harmful substances and that the article therefore is harmless for human health. The test is conducted by our independent OEKO-TEX® partner institutes on the basis of our extensive OEKO-TEX® criteria catalog. In the test they take into account numerous regulated and non-regulated substances, which may be harmful to human health. In many cases the limit values for the STANDARD 100 go beyond national and international requirements.

The Global Recycled Standard (GRS) is a full product standard to verify and track recycled raw materials through the supply chain. It also includes processing criteria to prevent the use of potentially hazardous chemicals, and verifies positive social or environmental production at the facilities. The GRS uses the chain of custody requirements of the Content Claim Standard (CCS). <https://textileexchange.org/standards_faqs/>

Managed by the Global Electronics Council (GEC), the EPEAT ecolabel covers products and services from the technology sector. Bronze-rated products meet all the required criteria in each EPEAT product category.

Managed by the Global Electronics Council (GEC), the EPEAT ecolabel covers products and services from the technology sector. Gold-rated products meet all the required criteria plus at least 75% of the optional criteria.

REACH is a regulation of the European Union, adopted to improve the protection of human health and the environment from the risks that can be posed by chemicals, while enhancing the competitiveness of the EU chemicals industry. It also promotes alternative methods for the hazard assessment of substances in order to reduce the number of tests on animals. 

The RoHS Directive specify the limits on the use of lead, mercury, cadmium, hexavalent chromium, PBB and PBDEs in electrical and electronic equipment. **Why is RoHS compliance important?** The restricted materials are hazardous to the environment and pollute landfills, and are dangerous in terms of occupational exposure during manufacturing and recycling.

TCO Certified is the world’s most comprehensive sustainability certification for IT products, helping you make responsible product choices that drive the industry in a sustainable direction. Using TCO Certified also supports your organization’s efforts to reduce risk and take the next step in social and environmental responsibility.

ENERGY STAR products are the same or better than standard products, only they use less energy. To earn the ENERGY STAR, they must meet strict energy efficiency criteria set by the US Environmental Protection Agency or the US Department of Energy.

REACH is a regulation of the European Union, adopted to improve the protection of human health and the environment from the risks that can be posed by chemicals, while enhancing the competitiveness of the EU chemicals industry. It also promotes alternative methods for the hazard assessment of substances in order to reduce the number of tests on animals. 

The RoHS Directive specify the limits on the use of lead, mercury, cadmium, hexavalent chromium, PBB and PBDEs in electrical and electronic equipment. **Why is RoHS compliance important?** The restricted materials are hazardous to the environment and pollute landfills, and are dangerous in terms of occupational exposure during manufacturing and recycling.

Certified B Corporations are businesses that meet the highest standards of verified social and environmental performance, public transparency, and legal accountability to balance profit and purpose. B Corps are accelerating a global culture shift to redefine success in business and build a more inclusive and sustainable economy.

If a textile article carries the STANDARD 100 label, you can be certain that every component of this article, i.e. every thread, button and other accessories, has been tested for harmful substances and that the article therefore is harmless for human health. The test is conducted by our independent OEKO-TEX® partner institutes on the basis of our extensive OEKO-TEX® criteria catalog. In the test they take into account numerous regulated and non-regulated substances, which may be harmful to human health. In many cases the limit values for the STANDARD 100 go beyond national and international requirements.

REACH is a regulation of the European Union, adopted to improve the protection of human health and the environment from the risks that can be posed by chemicals, while enhancing the competitiveness of the EU chemicals industry. It also promotes alternative methods for the hazard assessment of substances in order to reduce the number of tests on animals. 

When an electronic device has an FCC certificate, it means the product has been tested to comply with FCC standards and it has been approved. An FCC certification does not imply that the product is safe or durable. It simply means that it meets regulated limits for ionizing radiation. A certification does not imply that the device was manufactured any specific way. FCC approval can be granted as long as the electronic device meets FCC emission rules and regulations and has been tested to comply with FCC standards.

The UL Listing Mark is one of the most common UL Marks. If a product carries this Mark, it means UL found that representative product samples met UL's safety requirements. These requirements are primarily based on UL's own published standards for safety.

The RoHS Directive specify the limits on the use of lead, mercury, cadmium, hexavalent chromium, PBB and PBDEs in electrical and electronic equipment.

REACH is a regulation of the European Union, adopted to improve the protection of human health and the environment from the risks that can be posed by chemicals, while enhancing the competitiveness of the EU chemicals industry. It also promotes alternative methods for the hazard assessment of substances in order to reduce the number of tests on animals. 

CE marking is an administrative marking that indicates conformity with health, safety, and environmental protection standards for products sold within the European Economic Area (EEA). It is not a quality indicator or a certification mark. The CE marking is also found on products sold outside the EEA that have been manufactured to EEA standards. This makes the CE marking recognizable worldwide even to people who are not familiar with the European Economic Area. It is in that sense like the FCC Declaration of Conformity used for selling certain electronic devices in the United States.

When an electronic device has an FCC certificate, it means the product has been tested to comply with FCC standards and it has been approved. An FCC certification does not imply that the product is safe or durable. It simply means that it meets regulated limits for ionizing radiation. A certification does not imply that the device was manufactured any specific way. FCC approval can be granted as long as the electronic device meets FCC emission rules and regulations and has been tested to comply with FCC standards.

The UL Listing Mark is one of the most common UL Marks. If a product carries this Mark, it means UL found that representative product samples met UL's safety requirements. These requirements are primarily based on UL's own published standards for safety.

The RoHS Directive specify the limits on the use of lead, mercury, cadmium, hexavalent chromium, PBB and PBDEs in electrical and electronic equipment.

REACH is a regulation of the European Union, adopted to improve the protection of human health and the environment from the risks that can be posed by chemicals, while enhancing the competitiveness of the EU chemicals industry. It also promotes alternative methods for the hazard assessment of substances in order to reduce the number of tests on animals. 

CE marking is an administrative marking that indicates conformity with health, safety, and environmental protection standards for products sold within the European Economic Area (EEA). It is not a quality indicator or a certification mark. The CE marking is also found on products sold outside the EEA that have been manufactured to EEA standards. This makes the CE marking recognizable worldwide even to people who are not familiar with the European Economic Area. It is in that sense like the FCC Declaration of Conformity used for selling certain electronic devices in the United States.

Managed by the Global Electronics Council (GEC), the EPEAT ecolabel covers products and services from the technology sector. Silver-rated products meet all the required criteria plus at least 50% of the optional criteria.

Managed by the Global Electronics Council (GEC), the EPEAT ecolabel covers products and services from the technology sector. Bronze-rated products meet all the required criteria in each EPEAT product category.

REACH is a regulation of the European Union, adopted to improve the protection of human health and the environment from the risks that can be posed by chemicals, while enhancing the competitiveness of the EU chemicals industry. It also promotes alternative methods for the hazard assessment of substances in order to reduce the number of tests on animals. 

The RoHS Directive specify the limits on the use of lead, mercury, cadmium, hexavalent chromium, PBB and PBDEs in electrical and electronic equipment. **Why is RoHS compliance important?** The restricted materials are hazardous to the environment and pollute landfills, and are dangerous in terms of occupational exposure during manufacturing and recycling.

Managed by the Global Electronics Council (GEC), the EPEAT ecolabel covers products and services from the technology sector. Silver-rated products meet all the required criteria plus at least 50% of the optional criteria.

Managed by the Global Electronics Council (GEC), the EPEAT ecolabel covers products and services from the technology sector. Bronze-rated products meet all the required criteria in each EPEAT product category.

REACH is a regulation of the European Union, adopted to improve the protection of human health and the environment from the risks that can be posed by chemicals, while enhancing the competitiveness of the EU chemicals industry. It also promotes alternative methods for the hazard assessment of substances in order to reduce the number of tests on animals. 

The RoHS Directive specify the limits on the use of lead, mercury, cadmium, hexavalent chromium, PBB and PBDEs in electrical and electronic equipment. **Why is RoHS compliance important?** The restricted materials are hazardous to the environment and pollute landfills, and are dangerous in terms of occupational exposure during manufacturing and recycling.

ENERGY STAR products are the same or better than standard products, only they use less energy. To earn the ENERGY STAR, they must meet strict energy efficiency criteria set by the US Environmental Protection Agency or the US Department of Energy.

The RoHS Directive specify the limits on the use of lead, mercury, cadmium, hexavalent chromium, PBB and PBDEs in electrical and electronic equipment.

Managed by the Global Electronics Council (GEC), the EPEAT ecolabel covers products and services from the technology sector. Gold-rated products meet all the required criteria plus at least 75% of the optional criteria.

REACH is a regulation of the European Union, adopted to improve the protection of human health and the environment from the risks that can be posed by chemicals, while enhancing the competitiveness of the EU chemicals industry. It also promotes alternative methods for the hazard assessment of substances in order to reduce the number of tests on animals. 

When an electronic device has an FCC certificate, it means the product has been tested to comply with FCC standards and it has been approved. An FCC certification does not imply that the product is safe or durable. It simply means that it meets regulated limits for ionizing radiation. A certification does not imply that the device was manufactured any specific way. FCC approval can be granted as long as the electronic device meets FCC emission rules and regulations and has been tested to comply with FCC standards.

The ETL Mark is proof of product compliance to North American safety standards. Authorities Having Jurisdiction(AHJs) and code officials across the US and Canada accept the ETL Listed Mark as proof of product compliance to published industry standards. Retail buyers accept it on products they're sourcing. And every day, more and more consumers recognize it on products they purchase as a symbol of safety.

ENERGY STAR products are the same or better than standard products, only they use less energy. To earn the ENERGY STAR, they must meet strict energy efficiency criteria set by the US Environmental Protection Agency or the US Department of Energy.

The RoHS Directive specify the limits on the use of lead, mercury, cadmium, hexavalent chromium, PBB and PBDEs in electrical and electronic equipment.

CE marking is an administrative marking that indicates conformity with health, safety, and environmental protection standards for products sold within the European Economic Area (EEA). It is not a quality indicator or a certification mark. The CE marking is also found on products sold outside the EEA that have been manufactured to EEA standards. This makes the CE marking recognizable worldwide even to people who are not familiar with the European Economic Area. It is in that sense like the FCC Declaration of Conformity used for selling certain electronic devices in the United States.

When an electronic device has an FCC certificate, it means the product has been tested to comply with FCC standards and it has been approved. An FCC certification does not imply that the product is safe or durable. It simply means that it meets regulated limits for ionizing radiation. A certification does not imply that the device was manufactured any specific way. FCC approval can be granted as long as the electronic device meets FCC emission rules and regulations and has been tested to comply with FCC standards.

The ETL Mark is proof of product compliance to North American safety standards. Authorities Having Jurisdiction(AHJs) and code officials across the US and Canada accept the ETL Listed Mark as proof of product compliance to published industry standards. Retail buyers accept it on products they're sourcing. And every day, more and more consumers recognize it on products they purchase as a symbol of safety.

ENERGY STAR products are the same or better than standard products, only they use less energy. To earn the ENERGY STAR, they must meet strict energy efficiency criteria set by the US Environmental Protection Agency or the US Department of Energy.

The RoHS Directive specify the limits on the use of lead, mercury, cadmium, hexavalent chromium, PBB and PBDEs in electrical and electronic equipment.

CE marking is an administrative marking that indicates conformity with health, safety, and environmental protection standards for products sold within the European Economic Area (EEA). It is not a quality indicator or a certification mark. The CE marking is also found on products sold outside the EEA that have been manufactured to EEA standards. This makes the CE marking recognizable worldwide even to people who are not familiar with the European Economic Area. It is in that sense like the FCC Declaration of Conformity used for selling certain electronic devices in the United States.

Managed by the Global Electronics Council (GEC), the EPEAT ecolabel covers products and services from the technology sector. Silver-rated products meet all the required criteria plus at least 50% of the optional criteria.

UL GREENGUARD Certification Program requires that products undergo independent, scientific testing and ongoing monitoring of their chemical emissions. Only products that meet UL Environment’s stringent emissions standards qualify for certification. GREENGUARD Certification helps manufacturers make and market products that have low chemical emissions and contribute to the healthier indoor air.

ENERGY STAR products are the same or better than standard products, only they use less energy. To earn the ENERGY STAR, they must meet strict energy efficiency criteria set by the US Environmental Protection Agency or the US Department of Energy.

The RoHS Directive specify the limits on the use of lead, mercury, cadmium, hexavalent chromium, PBB and PBDEs in electrical and electronic equipment.

When an electronic device has an FCC certificate, it means the product has been tested to comply with FCC standards and it has been approved. An FCC certification does not imply that the product is safe or durable. It simply means that it meets regulated limits for ionizing radiation. A certification does not imply that the device was manufactured any specific way. FCC approval can be granted as long as the electronic device meets FCC emission rules and regulations and has been tested to comply with FCC standards.

The RoHS Directive specify the limits on the use of lead, mercury, cadmium, hexavalent chromium, PBB and PBDEs in electrical and electronic equipment.

REACH is a regulation of the European Union, adopted to improve the protection of human health and the environment from the risks that can be posed by chemicals, while enhancing the competitiveness of the EU chemicals industry. It also promotes alternative methods for the hazard assessment of substances in order to reduce the number of tests on animals. 

CE marking is an administrative marking that indicates conformity with health, safety, and environmental protection standards for products sold within the European Economic Area (EEA). It is not a quality indicator or a certification mark. The CE marking is also found on products sold outside the EEA that have been manufactured to EEA standards. This makes the CE marking recognizable worldwide even to people who are not familiar with the European Economic Area. It is in that sense like the FCC Declaration of Conformity used for selling certain electronic devices in the United States.